A Novel Chronoimpedimetric Glucose Sensor in Real Blood Samples Modified by Glucose‐imprinted Pyrrole‐Aminophenylboronic Acid Modified Screen Printed Electrode

In this study, a molecularly imprinted sensor technology is engineered to detect glucose in real blood samples by chronoimpedimetrically. The imprinting process of glucose (Glc) was carried out by electrochemical polymerization of aminophenylboronic acid (APBA) and pyrrole (Py) by performing cyclic voltammetry (CV). Afterwards, glucose molecule was removed from imprinted surface by 5 % acetic acid to reveal glucose imprinted cavities. Electrochemical Impedance Spectroscopy (EIS) was used to characterize sensor modification steps and glucose removal. Glucose monitoring process was carried out chronoimpedimetrically(CI) for the first time in real blood samples. Calibration curve was prepared between 20–800 mg/dL. The standard deviations of the 18 calibration curves R² were calculated as 0.9866±0.0066 to assess reproducibility. Recovery was calculated by using 105 mg/dL Glc Serum Sample, which was monitored by auto analyzer and into this sample 50 mg/dL Glc added and our sensor response was 147.92±2.43 mg/dL, 98.6±1.62 % (n=5). Non‐imprinted (NIP) sensor gave no signal for the glucose concentration.     

Molecularly Imprinted Impedimetric Sensor for Determination of Mycotoxin Zearalenone

The mycotoxin zearalenone (ZEA) prompts reproductive toxicity due to its strong estrogenic effects. In this work, an electrochemical sensor for determination of ZEA was developed by electropolymerization of a molecularly imprinted poly (o‐phenylenediamine) (PPD) film on screen‐printed gold electrode (SPGE) surface. The sensor was examined by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) using K₃[Fe(CN)₆]/K₄[Fe(CN)₆] as redox probe. The molecularly imprinted polymer (MIP) sensor showed a wide determination range from 2.50 to 200.00 ngmL^?1 for ZEA. The Limit of detection (LOD) was calculated to be 0.20 ngmL^?1, based on the signal to noise (S/N) ratio equal to 3.0. The sensor displayed good repeatability, with RSD values≤4.6 %, and maintained 93.2 % of its initial response after storage for 10 days in air at room temperature. The developed method was successfully applied for the determination of ZEA in corn flakes with mean recoveries ranged from 96.2 % to 103.8 % and RSDs within the interval of 2.1 % to 3.8 %.     

Electrochemical behavior of PbO2/PbSO4 electrode in the presence of surfactants in electrolyte

The electrochemical behavior of PbO₂/PbSO₄ electrode is investigated in 4.5 M H₂SO₄ in presence of three surfactants, Sodium Dodecyl Sulfate (SDS), Cetyltrimethylammonium bromide (CTAB) and Sodium tripolyphosphate (STPP), using cyclic voltametry, electrochemical spectroscopy impedance and galvanostatic discharge as techniques. The micro morphology of the surface of the modified PbO₂ electrodes is examined by scanning electron microscopy. The results show that SDS and CTAB when added in the electrolyte could refine the coating particles and change the roughness of the surface of the electrode leading to a thin film of PbO₂ with amorphous character. In addition, SDS and CTAB shift the hydrogen evolution potential towards more negative values, improve the discharge capacity of the anodic layer and accelerate the charge transfer. Under cathodic polarization, CTAB presents the lowest value of the charge transfer resistance R_ct. In the contrary, STPP shifts the oxygen evolution potential towards more positive values, passivates the surface of the electrode and inhibits completely the reaction of PbO₂ formation.     

Electrochemical characteristics of the blended polymer electrolytes containing lithium salts

Blend-based polymer electrolytes composed of poly(ethylene oxide), poly(oligo[oxyethylene]oxysebacoyl), and lithium salts have been prepared. These polymer electrolytes have been investigated in terms of ionic conductivity, transport number, and interfacial characteristics of the lithium electrode in contact with the polymer electrolyte. The influences of the blend composition, the salt used, and its concentration on the electrochemical behavior were studied. © 1996 John Wiley & Sons, Inc.     

NaOH电解液改善MH/Ni电池自放电性能的机理研究

以NaOH电解液代替KOH能够明显改善MH/N i电池的自放电性能和高温(60℃)充电效率.电化学阻抗和循环伏安测试表明,NaOH电解液的作用可能是改变了H原子于负极表面的吸(脱)附行为,并在一定程度上抑制了负极的析氢过程,从而改善了电池的自放电性能.     

基于电化学发光和阻抗技术研究DNA单碱基错配

单碱基错配的识别和稳定性差异在核酸多态性研究中至关重要。在同一电化学传感器平台上,采用电化学发光（ECL）和电化学阻抗（EIS）2种技术,协同研究DNA链中不同类型和不同位点的单碱基错配识别和稳定性差异。电极表面具有茎环构象的探针DNA与完全互补DNA、不同类型或不同位点单碱基错配DNA杂交前后的ECL和EIS信号强度变化有显著差异。信号强度变化可揭示单碱基错配识别的稳定性。结果表明,DNA链中心位点的C-A单碱基错配稳定性低于链两端的,靠近键合电极表面双链链端的C-A单碱基错配稳定性低于非键合电极表面双链链端的,同一中心位点C-X碱基对的稳定性顺序为C-G?C-T>C-A≥C-C。研究结果可为核酸多态性研究提供参考。     

聚乙撑二氧噻吩阳极降解的研究

研究了聚乙撑二氧噻吩(PEDOT)膜在水溶液中的阳极降解过程. 研究发现PEDOT的阳极过程可以分为p掺杂区[电位范围－0.3～0.5 V (相对于饱和甘汞电极; vs. SCE)]、过渡区[电位范围0.6～1 V (vs. SCE)]、过氧化区[电位范围1.2～1.6 V (vs. SCE)]三个电位区域. 用电化学阻抗谱法、循环伏安法、红外光谱技术、膜电阻测量以及电子自旋共振技术分别研究了PEDOT膜在这三个电位区域的行为. 结果表明: PEDOT膜在这三个电位区域的性质有明显不同. 在p掺杂区PEDOT膜的官能团、共轭结构、导电性均保持, 即在这个电位区发生可逆的掺杂/脱掺杂反应, 膜几乎不降解. 在过渡区和过氧化区, PEDOT膜均发生了降解. 与传统的导电聚合物在高电位的阳极降解的过氧化过程不同, 我们认为膜在较高电位(过渡区)发生一个驰豫过程, 该过程使得膜的官能团改变, 但是膜的共轭结构和导电性均保持; 而在更高的电位区(过氧化区)膜的降解和一般意义的过氧化降解相同, 此时膜的官能团、共轭结构、导电性均发生不可逆的破坏.     

Electrical properties of interdigitated partially bent like shaped liquid crystalline compound

This article represents the electrical studies of an interdigitated highly skewed N(4-n-pentyloxybenzylidene) 4-n-alkylaniline (5O.16) compound. Interestingly the compound is partially bent like and unsymmetrical in alkyl chain length. Dielectric and impedance spectroscopy studies indicate the coupling between the liquid crystal and the electrical field. Studies were carried out as a function of temperature as well as frequency. Semicircular nature of the Cole–Cole plots indicates the reorientation of the molecule with the applied field. Using the experimental data and the theoretically fitted results the effective equivalent model circuit was designed. Which used to explain the behavior of the compound under the external electric effect and the influence of the electrodes with different variable represent the resistor circuit. However, the effect of the conductivity of temperature and frequency are also reported.     

Entropy Could Quantify Brain Activation Induced by Mechanical Impedance-Restrained Active Arm Motion: A Functional NIRS Study

Brain activation has been used to understand brain-level events associated with cognitive tasks or physical tasks. As a quantitative measure for brain activation, we propose entropy in place of signal amplitude and beta value, which are widely used, but sometimes criticized for their limitations and shortcomings as such measures. To investigate the relevance of our proposition, we provided 22 subjects with physical stimuli through elbow extension-flexion motions by using our exoskeleton robot, measured brain activation in terms of entropy, signal amplitude, and beta value; and compared entropy with the other two. The results show that entropy is superior, in that its change appeared in limited, well established, motor areas, while signal amplitude and beta value changes appeared in a widespread fashion, contradicting the modularity theory. Entropy can predict increase in brain activation with task duration, while the other two cannot. When stimuli shifted from the rest state to the task state, entropy exhibited a similar increase as the other two did. Although entropy showed only a part of the phenomenon induced by task strength, it showed superiority by showing a decrease in brain activation that the other two did not show. Moreover, entropy was capable of identifying the physiologically important location.     

Some notes on the impedance method for mechanistic studies of electrode reactions

Conditions for obtaining high precision impedance data on electrochemical metal/electrolyte interfaces are discussed and some results pertaining to several electrode reactions presented. The importance of the dropping mercury electrode is stressed. Published in Elektrokhimiya in Russian, 2009, vol. 45, No. 1, pp. 28–31. Dedicated to Professor B.V. Ershler on the occasion of the Centenary of his birth. The text was submitted by author in English.