丙烯腈-尿素包合物的形成过程及特征

利用差示扫描量热法(DSC)和X射线衍射(XRD)研究了在不同丙烯腈/尿素投料比情况下的丙烯腈-尿素包合物的形成过程和组成. 实验结果表明DSC是一种研究包合物的客主比及分解热的有效方法. 测定了丙烯腈-尿素包合物的客主比和分解热分别为1.17和5361.53 J/mol. 同时发现丙烯腈-尿素包合物的形成依赖于冷冻时间,在足够长的冷冻时间之后丙烯腈-尿素包合物的组成达到稳定状态. 实验结果表明,丙烯腈分子可能是采用堆叠的方式排布在尿素晶道结构中. XRD结果表明只要丙烯腈分子进入尿素晶格中,丙烯腈-尿素包合物的结构便形成了,并且这种结构与形成过程终了时的结构是一致的. 只要丙烯腈是足量的,包合物中的丙烯腈分子排列会随冷冻时间的延长而增长,直到尿素的晶道结构被丙烯腈分子填满.     

超短时延测量DFB激光器的动态线宽

激光器调谐过程中的动态线宽是非常重要的参数, 然而, 当前各种测量方法得到的都是激光器稳定状态下的静态线宽. 本文提出一种对干涉拍信号进行基于局部均值分解的时频分析进而获取激光动态线宽的方法, 通过仿真信号验证了这种时频分析方法提取瞬时相位噪声的有效性; 构建实验系统, 利用10cm路径差产生约0.5ns的超短时延, 提取相位噪声的时频分布, 首次得到了分布反馈半导体激光器在脉冲工作模式下的动态线宽. 关键词： 超短时延 动态线宽 局部均值分解 时频分布     

噪声模态单元预判的经验模态分解脉冲星信号消噪

为了改善脉冲星辐射脉冲信号的消噪效果, 提出了一种基于噪声模态单元预判的经验模态分解(EMD) 消噪声方法. 该方法首先利用EMD将含噪辐射脉冲信号分解为一组内蕴模态函数(IMF), 根据IMF系数的统计特性采用局部均方误差准则进行噪声模态单元预判, 并将噪声模态单元置零; 然后对噪声模态单元预判处理后的IMF以模态单元为基本单位进行最优比例萎缩消噪, 从而达到抑制噪声、保留信号的目的. 实验结果表明: 与Sure Shrink小波阈值法、Bayes Shrink小波阈值法和EMD模态单元比例萎缩法相比, 基于噪声模态单元预判的EMD消噪方法可以更有效地去除脉冲辐射信号中的噪声, 同时更好地保留信号突变处的细节信息特征, 在信噪比、 均方误差、峰值相对误差、峰位误差和相位误差等方面都有一定程度的改善. 关键词： 脉冲星信号消噪 经验模态分解 噪声模态单元预判 局部均方误差     

Stochastic resonance in multi-scale bistable array

This Letter explores a new mechanism of stochastic resonance (SR) that is induced by the multi-scale noise decomposed from the input signal, which is promising in signal detection and processing under heavy background noise. The input signal is firstly decomposed to multi-scale signals by orthogonal wavelet transform. Then, the approximate signal, which contains the driving signal, is processed by an uncoupled parallel bistable array with the detailed signal of each scale as the internal noise. At last, a SR mechanism combining the effects of colored noise and array SR is proposed. The simulation results show that a high quality output signal can be obtained by the new mechanism. The proposed model is more adaptive to input signal with high noise intensity than single bistable SR system, which can be seen from the signal-to-noise ratio curves and average noise intensity curves.     

Ranking spreaders by decomposing complex networks

Ranking the nodes? ability of spreading in networks is crucial for designing efficient strategies to hinder spreading in the case of diseases or accelerate spreading in the case of information dissemination. In the well-known k-shell method, nodes are ranked only according to the links between the remaining nodes (residual links) while the links connecting to the removed nodes (exhausted links) are entirely ignored. In this Letter, we propose a mixed degree decomposition (MDD) procedure in which both the residual degree and the exhausted degree are considered. By simulating the epidemic spreading process on real networks, we show that the MDD method can outperform the k-shell and degree methods in ranking spreaders.     

Electrochemical cells with multilayer functional electrodes

Microstructural and chemical changes in a NiO-YSZ electrocatalytic electrode were studied. The microstructural changes in the NiO-YSZ electrocatalytic electrode after the cell operation was compared with the electrode quenched under the applied voltage to suppress the oxidation process. The reversible reduction of NiO into Ni and the formation of intergranular Ni layers at the NiO/YSZ interface were investigated. It was shown that in a compositional range of the NiO-YSZ electrodes from 1/3 to 2/3 the value of the ambipolar conductivity increased with increasing voltage applied to the electrochemical cell. The observed reversible increase in the value of ambipolar conductivity of the electrocatalytic electrode is described in frames of the model of reversible reduction of NiO into Ni under the conditions of cell operation.     

Growth and decay of the Pd(1 1 1)-Pd5O4 surface oxide: Pressure-dependent kinetics and structural aspects

Growth and decomposition of the Pd₅O₄ surface oxide on Pd(1 1 1) were studied at sample temperatures between 573 and 683 K and O₂ gas pressures between 10⁻⁷ and 6 × 10⁻⁵ mbar, by means of an effusive O₂ beam from a capillary array doser, scanning tunnelling microscopy (STM) and thermal desorption spectrometry (TDS). Exposures beyond the p(2 × 2)O adlayer (saturation coverage 0.25) at 683 K (near thermodynamic equilibrium with respect to Pd₅O₄ surface oxide formation) lead to incorporation of additional oxygen into the surface. To initiate the incorporation, a critical pressure beyond the thermodynamic stability limit of the surface oxide is required. This thermodynamic stability limit is near 8.9 × 10⁻⁶ mbar at 683 K, in good agreement with calculations by density functional theory. A controlled kinetic study was feasible by generating nuclei by only a short O₂ pressure pulse and then following further growth kinetics in the lower (10⁻⁶ mbar) pressure range.Growth of the surface oxide layer at a lower temperature (573 K) studied by STM is characterized by a high degree of heterogeneity. Among various metastable local structures, a seam of disordered oxide formed at the step edges is a common structural feature characteristic of initial oxide growth. Further oxide nucleation appears to be favoured along the interface between the p(2 × 2)O structure and these disordered seams. Among the intermediate phases one specifically stable phase was detected both during growth and decomposition of the Pd₅O₄ layer. It is hexagonal with a distance of about 0.62 nm between the protrusions. Its well-ordered form is a superstructure.Isothermal decay of the Pd₅O₄ oxide layer at 693 K involves at first a rearrangement into the structure, indicating its high-temperature stability. This structure can break up into small clusters of uniform size and leaves a free metal surface area covered by a p(2 × 2)O adlayer. The rate of desorption increases autocatalytically with increasing phase boundary metal-oxide. We propose that at close-to-equilibrium conditions (693 K) surface oxide growth and decay occur via this intermediate structure.     

(H2O)n (n=1-3)和H2SO4作用下H2CO3气相分解反应机理的理论研究

本文利用CCSD(T)/6-311++(3df,3pd)//B3LYP-D3/6-311++G(3df,3pd)+ 0.9686×ZPE理论方法对(H2O)n (n=1-3)和H2SO4存在与不存在的情况下,H2CO3气相分解反应机理进行了理论研究。计算结果表明(H2O)n (n=1-3)和H2SO4都能使H2CO3气相分解反应的能垒显著地降低,其催化能力按由强到弱的顺序是H2SO4>(H2O)2>(H2O)3>H2O。     

基于设备结构分解的可视化故障推理与诊断技术研究

通过定义热区和热区索引,将故障推理与诊断同设备结构分解相对应,在诊断的过程中构建了故障自动推理编码规则,可将故障树转换成一系列可操作的且具有一定逻辑关系的编码,实现可视化故障自动推理和诊断。通过某型电子装备进行故障推理实例验证,表明该方法层次结构清晰,推理简单有效,能够实现装备可视化的LRU级分层故障诊断和故障的快速定位。     

基于形态学4子带分解金字塔的图像融合

提出了一种基于数学形态学滤波的多分辨力图像融合。这种融合方法使用了形态学开闭运算构造了低通与高通滤波器,将原始图像分解为4子带图像金字塔和4子带方向衬比度图像金字塔。然后利用方向衬比度和区域标准差进行图像融合得到融合的4子带图像金字塔,最后应用子带图像重构得到融合图像。融合实验表明,该方法优于传统的形态学金字塔图像融合,衬比度金字塔图像融合和小波分解图像融合。