Sr掺杂对La_(1-x)Sr_xMnO_3/LaAlO_3/SrTiO_3界面电子结构的影响

采用基于密度泛函理论的第一性原理计算方法,系统地研究了La_(1-x)Sr_xMnO_3层中Sr的掺杂方式和掺杂量对4La_(1-x)Sr_xMnO_3/3LaAlO_3/4SrTiO_3(LSMO/LAO/STO)异质结构原子和电子结构的影响.结果表明:对于相同的Sr掺杂量,掺杂方式的差异对体系电子结构的影响微弱,不会导致体系发生金属-绝缘体转变;掺杂量的不同对体系电子结构有着显著的影响,当Sr的掺杂量较少时,LAO/STO界面处存在着准二维电子气,当Sr的掺杂量高于1/3时,LAO/STO界面处准二维电子气消失.我们相信,Sr的引入以及通过Sr掺杂量的改变可以对LSMO覆盖层极化进行调控,这也是导致体系LAO/STO界面处金属-绝缘体转变的可能原因,进一步为极化灾变机制导致的界面处电子重构提供了证据.     

A study on defect formation and magnetic properties of nitrogen-doped ZnO nanowires by the first principles

Theoretical calculation based on density functional theory (DFT) and generalized gradient approximation (GGA) has been carried out in studying defect formation energies, ionizing energies and ferromagnetism of nitrogen-doped ZnO nanowires. The result shows that N_O is deep acceptor, which make it hard to ionize. Ferromagnetic (FM) and antiferromagnetic (AFM) coupling between N atoms are also investigated. The results show that FM coupling between N atoms is more stable than AFM coupling. The FM coupling mechanism is explained by the interaction of N energy level. In addition, zinc and oxygen vacancies affecting FM coupling is also discussed. It is found that zinc and oxygen vacancies are unfavorable for stabilizing FM coupling of nitrogen-doped ZnO nanowires.     

射频光纤链路γ射线辐致损伤特性实验研究

由于空间环境中宇宙辐射无处不在,工作在空间环境的光纤系统必须考虑辐致损伤特性。建立了10GHz的射频光纤链路传输系统,分别采用单模光纤和保偏光纤作为传输媒质。利用60 Co`γ射线源,在剂量率1rad/s总剂量50krad下,对射频光纤链路进行辐照实验,对两种系统做对比分析。实验结果表明,单模光纤链路的辐致损耗绝对值较大,保偏光纤链路的辐致损耗绝对值较小;单模光纤的幂律模型指数较保偏光纤大,即同样的辐照剂量,单模光纤受影响程度大。在辐照起主要影响因素的阶段,单模光纤延时差受辐照影响程度较保偏光纤稍小。辐致损耗和辐致延时差对光纤长度都有线性累加作用。从整体水平看,50krad的辐射总剂量对两种光纤造成的损伤并不大,传输的信号仍在可用的范围之内。     

A correlation for burn time of aluminum particles in the transition regime

A study of the combustion times for aluminum particles in the size range of 3–11 μm with oxygen, carbon dioxide, and water vapor oxidizers at high temperatures (>2400 K), high pressures (4–25 atm), and oxidizer composition (15–70% by volume in inert diluent) in a heterogeneous shock tube has generated a correlation valid in the transition regime. The deviation from diffusion limited behavior and burn times that could otherwise be accurately predicted by the widely accepted Beckstead correlation is seen, for example, in particles below 20 μm, and is evidenced by the lowering of the diameter dependence on the burn time, a dependence on pressure, and a reversal of the relative oxidizer strengths of carbon dioxide and water vapor. The strong dependence on temperature of burn time that is seen in nano-Al is not observed in these micron-sized particles. The burning rates of aluminum in these oxidizers can be added to predict an overall mixture burnout time adequately. This correlation should extend the ability of modelers to predict combustion rates of particles in solid rocket motor environments down to particle diameters of a few microns.     

Improving image quality of diagnostic ultrasound by using the safe use time model with the dynamic safety factor and the effect of the exposure time on the image quality

Resolution and penetration are primary criteria for image quality of diagnostic ultrasound. In theory (and usually in practice), the maximum depth of imaging in a tissue increases as power (pressure) is increased. Alternatively, at a particular effective penetration, an increased power may be used to allow a higher ultrasound frequency for higher resolution and tissue contrast. Recently, Karagoz and Kartal [29] proposed a safety parameter for thermal bioeffects of diagnostic ultrasound; that is, SUT (safe use time). The SUT model is constructed to determine how long one piece of tissue can be insonated safely according to a threshold exposure. Also, Karagoz and Kartal [29] suggested that an increase in acoustic intensity beyond the current US Food and Drug Administration (FDA) limit of intensity can be theoretically possible by using SUT model while staying within the safe limit. The present study was motivated particularly by the goals of higher resolution and/or deeper penetration by using SUT model. The results presented here suggest that the safe use of higher exposure levels than currently allowed by the FDA may be possible for obtaining substantial improvements in penetration depth and/or resolution. Also, the study reveals that image quality can be functionally related to exposure time in addition to acoustic energy and frequency.     

Lagrange方法基于保正性的时间步长

对交错网格上Lagrange预估-校正显示格式的时间步长选取提出新的方法.与经典CFL稳定性理论时间步长选取方法不同,新方法考虑了原始微分方程组的非线性效应,并基于物理量保正性给出了自适应的时间步长选取方法.数值实验验证了该方法有效.     

二维顶盖驱动半圆腔内流动MRT-LBM研究

本文采用多弛豫时间格子玻尔兹曼方法(multi relaxation time lattice Boltzmann method—MRT LBM)对二维顶盖驱动半圆腔内流动进行了数值模拟,得到了雷诺数为500～50000范围内半圆腔内流场分布情况。在二维顶盖驱动半圆腔流场中,随雷诺数的增大,流场内旋涡的数目逐渐增加,且流动依次呈现出稳定流、周期流、混沌流等状态。本文计算结果表明,MRT-LBM模型可显著提高计算的稳定性,适用于大范围的雷诺数流动情况。     

脉冲磁化条件下非晶磁芯的损耗特性

基于工频或高频磁化条件下磁芯的测试数据不能准确反映磁芯在单次脉冲磁化下的性能,给出了一种脉冲磁化条件下磁芯性能的测试方法和数据处理方法,实验研究了快脉冲磁化条件下非晶态合金磁芯的损耗特性,磁芯最短饱和时间67 ns,最大磁化速率达到40 T/s。通过数据处理,给出了磁芯损耗与磁化速率的关系曲线,获得了不同磁化速率下磁芯的损耗数据。分析了脉冲磁化条件下涡流损耗和磁滞损耗所占的比例。研究结果表明:脉冲磁化条件下非晶态合金磁芯损耗与磁化速率关系符合饱和波模型,磁芯损耗随磁化速率增大而线性增大。     

半绝缘GaAs光电导开关非线性电脉冲超快上升特性研究

利用流体模型对光生载流子的输运进行了模拟研究,结果表明载流子在输运过程中形成的光激发电荷畴是产生电脉冲超快上升特性的主要原因.对光激发电荷畴的形成和吸收过程的进一步研究表明：1)形成过程中的光激发电荷畴增强了电子的浓度梯度;2)光激发电荷畴在被阳极吸收的过程中,光电导开关偏置电压的快速下降能促进电流上升速度.光激发电荷畴的形成和吸收两大过程共同作用下,形成了电脉冲的超快上升特性. 关键词： 光电导开关 非线性模式 光激发电荷畴 上升时间     

计算机模拟光波的干涉

采用时域有限差分方法模拟了光的干涉这一物理现象.在物理实验的教学过程中光学实验以其高精度、高复杂度使得在实验教学过程中产生了一些负面影响.学生往往花费了较大精力去调节仪器,最终却得不到满意的实验数据,甚至得不到正确的实验结果.针对这一问题,可以采用数值模拟的方法得到很好的解决.文中不但模拟了实验现象,还验证了实验的理论公式,使得学生在观察现象的同时,对理论公式也能产生深刻的认识,最终起到了良好的课堂效果.