热动力学问题的数值计算

 对含热传导的流体动力学方程组，用有限元方法进行数值求解。采用傅里叶热传导计算热流、用热流连续条件计算单元间接触面的温度、用三角形传热法计算体单元表面的热流，考虑各向同性弹塑性流体材料模型、三项式物态方程和导热系数与状态的相关性，给出了傅里叶热传导、接触传热、热应力应变效应、以及混合物冲击压缩特性等算例。对混合物冲击温度的数值模拟表明，小颗粒混合物在冲击压缩过程中，颗粒间的温度有差别、稍有波动，并随时间趋向于一致，以至热平衡。     

On the Patterson–Sullivan Measure for Geometrically Finite Groups Acting on Complex or Quaternionic Hyperbolic Space

The goal of this paper is to provide a tool, the Global Measure Formula, that will facilitate the study of the limit set of discrete geometrically finite groups of isometries of the rank one symmetric spaces. We consider the shadow of a ball from a fixed reference point onto the boundary, and prove a formula that describes the measure of the shadow in terms of the center of the shadowed ball, generalizing a result from real hyperbolic geometry.     

(Mn1−xPbx)Pb10+ySb12−yS26−yCl4+yO, a new oxy-chloro-sulfide with ∼2 nm-spaced (Mn,Pb)Cl4 single chains within a waffle-type crystal structure

The new oxy-chloro-sulfide (Mn_1−xPb_x)Pb_10+ySb_12−yS_26−yCl_4+yO (x ∈ [0.2-0.3]; y ∈ [0.3-1.6]) was synthesized by dry way at 500-600 °C. A single crystal ∼Mn_0.7Pb_11.0Sb_11.3S_25.3Cl_4.7O indicates a monoclinic symmetry, space group C2/m, with a = 37.480(8), b = 4.1178(8), c = 18.167(4) Å, β = 106.37(3)°, V = 2690.2(9) Å³, Z = 2. Its crystal structure was determined by X-ray single crystal diffraction, with a final R = 5.11%. Modular analysis of the crystal structure reveals a “waffle” architecture, where complex rods with lozenge section delimitate an internal channel filled by a single chain of (Mn_0.7Pb_0.3)Cl₆ octahedra connected by opposite edges. Minimal inter-chain distances are close to 18 Å. The rod wall, two-atom thick, presents, in alternation with S atoms, Pb or (Pb,Sb) cations with prismatic coordination in the internal atom layer, while the external atom layer is constituted exclusively by Sb cations with dissymmetric square pyramidal coordination. A (Pb,Sb)₂S₂ fragment connects two successive rods along (2 0 1) to form a waffle-type palissadic layer. The unique O position, half filled, presents the same environment than the isolated O positions in the oxy-sulfide Pb₁₄Sb₃₀S₅₄O₅, or oxy-chloro-sulfides Pb₁₈Sb₂₀S₄₆Cl₂O and (Cu,Ag)₂Pb₂₁Sb₂₃S₅₅ClO. This compound belongs to a pseudo-homologous series of chalcogenides with waffle structure, ordered according to the size of their lozenge shape channel. Such a complex senary compound of the oxy-chloro-sulfide type illustrates the structural competition between three cations, on one hand, and, on the other hand, three anions. This compound is of special interest regarding the 1D distribution of magnetic Mn²⁺ atoms at the ∼2 nm scale.     

Sparse-grid finite-volume multigrid for 3D-problems

We introduce a multigrid algorithm for the solution of a second order elliptic equation in three dimensions. For the approximation of the solution we use a partially ordered hierarchy of finite-volume discretisations. We show that there is a relation with semicoarsening and approximation by more-dimensional Haar wavelets. By taking a proper subset of all possible meshes in the hierarchy, a sparse grid finite-volume discretisation can be constructed.The multigrid algorithm consists of a simple damped point-Jacobi relaxation as the smoothing procedure, while the coarse grid correction is made by interpolation from several coarser grid levels.The combination of sparse grids and multigrid with semi-coarsening leads to a relatively small number of degrees of freedom,N, to obtain an accurate approximation, together with anO(N) method for the solution. The algorithm is symmetric with respect to the three coordinate directions and it is fit for combination with adaptive techniques.To analyse the convergence of the multigrid algorithm we develop the necessary Fourier analysis tools. All techniques, designed for 3D-problems, can also be applied for the 2D case, and — for simplicity — we apply the tools to study the convergence behaviour for the anisotropic Poisson equation for this 2D case.     

On the rigidity of sphericalt-designs that are orbits of finite reflection groups

The concept of rigid sphericalt-designs was introduced by Bannai. He conjectured that there is a functionf(t, d) such that ifX is a sphericalt design in thed-dimensional Euclidean space so that |X|>f(t, d), theX is non-rigid. Furthermore, he asked to find examples of rigid but not tight sperical designs. In the present article we shall investigate the case whenX is an orbit of a finite reflection group and prove thatX is rigid iff tight for the groupsA _n ,B _n ,C _n ,D _n ,E ₆,E ₇,F ₄,I ₃.Research was partially supported by Hungarian National Research fund Grant No. 4267.     

串联系统可靠性虚拟系统法置信下限的小样本性质

本文讨论了具有r个成败型元件串联系统可靠性的置信下限问题。研究了虚拟系统法置信下限的小样本性质,证明了,在通常情况下虚拟系统法置信下限要大于常见的L-M法置信下限.更一般地,本文证明了在成败型试验中,当成功数与试验数之比保持不变时,试验次数的增加将直接缩小成功率置信区间的长度。     

Viscosity solution theory of a class of nonlinear degenerate parabolic equations II. Lipschitz continuity of free boundary

In [1] we construct a unique bounded Hölder continuous viscosity solution for the nonlinear PDEs with the evolutionp-Laplacian equation and its anisotropic version as typical examples. In this part, we investigate the Lipschitz continuity of the free boundary of viscosity solution and its asymptotic spherical symmetricity, however, this result does not include the anisotropic case.This research is supported by the National Natural Sciences Foundation of China.     

Mixed methods on quadrilaterals and hexahedra

We describe a new family of discrete spaces suitable for use with mixed methods on certain quadrilateral and hexahedral meshes. The new spaces are natural in the sense of differential geometry, so all the usual mixed method theory, including the hybrid formulation, carries over to these new elements with proofs unchanged. Because transforming general quadrilaterals into squares introduces nonlinearity and because mixed methods involve the divergence operator, the new spaces are more complicated than either the corresponding Raviart-Thomas spaces for rectangles or corresponding finite element spaces for quadrilaterals. The new spaces are also limited to meshes obtained from a rectangular mesh through the application of a single global bilinear transformation. Despite this limitation, the new elements may be useful in certain topologically regular problems, where initially rectangular grids are deformed to match features of the physical region. They also illustrate the difficulties introduced into the theory of mixed methods by nonlinear transformations.     

A nodal coupling of finite and boundary elements

This article presents and analyzes a simple method for the exterior Laplace equation through the coupling of finite and boundary element methods. The main novelty is the use of a smooth parametric artificial boundary where boundary elements fit without effort together with a straight approximate triangulation in the bounded area, with the coupling done only in nodes. A numerically integrated version of the algorithm is also analyzed. Finally, an isoparametric variant with higher order is proposed. © 2003 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 19: 555–570, 2003     

Pure quantitative characterization of finite simple groups

Let G be a finite group, and let π _e (G) be the set of all element orders of G. In this short paper we prove that π _e (B _n (q)) ≠ π _e (C _n (q)) for all odd q.