CuO/γ-Al2O3单分散催化剂的XAFS研究

采用XAFS方法研究浸渍法制备并于低温焙烧的CuO/γ-Al2O3催化剂的局域结构.对于CuO负载量小于单层分散阈值的CuO/γ-Al2O3(0.4mmol/100m2),结果表明,CuO物种是以层状分散的孤立原子簇存在于γ-Al2O3载体表面,其第一近邻Cu-O配位环境的结构与晶态CuO的相似,键长和配位数分别为0.195nm和4.对于CuO负载量等于单层分散阈值的CuO/γ-Al2O3(0.8mmol/100m2),已有少量的CuO纳米颗粒生成.对于CuO负载量大于单层分散阈值的CuO/γ-Al2O3(1.2mmol/100m2),其结构与多晶CuO的相近.基于CuO在γ-Al2O3载体上的三种不同分散状态的结构特点,我们提出了CuO/γ-Al2O3催化剂的结构模型.     

溶剂萃取法制备Co(PO_3)_2超细微粉

本文用溶剂萃取法成功地制备了偏磷酸钴超细微粉并通过ＸＲＤ，ＩＲ，ＴＧ，ＤＴＡ，ＴＥＭ等实验对超细微粉的组成、结构进行了表征。     

Adsorption of large macromolecules on fine colloidal particles

A simple model of adsorption of large macromolecules on ultra-fine colloidal particles is presented. The basic assumption of the model is that the number of particles attached to a single molecule is a random quantity. Both the reversible and irreversible polymerparticle binding is considered. Also, effects of the non-ideal mixing of polymer solution with suspension and of the polymer/particle size ratio on the shape of the adsorption isotherm are examined. The predictions of the model are confronted with experimental results of the study on the adsorption of very high molecular weight polyacrylamide on fine AgI colloidal particles.     

超临界流体技术在制备药物输送系统中的应用

超临界流体技术以其特有的优点成为引人注目的制备药物细微粒子及控制释放的药物输送系统的方法。本文介绍了超临界流体沉淀技术的概念、进展及相关的应用。     

Redox troponization of (η5-cyclopentadienyl)(η4-4-menthyl-4-exo-trichloromethylcyclohexa-2,5-dien-1-one)rhodium as a novel approach to the synthesis of metal-coordinated nonbenzenoid aromatics of the tropone seriesas a novel approach to the synthesis of metal-coordinated nonbenzenoid aromatics of the tropone series

The possibility of redox troponization of a gem-polyhalomethylated semiquinoid system, π-coordinated to a metal atom, was shown in relation to the reaction of (η⁵-cyclopentadienyl)(η⁴-4-menthyl-4-exo-trichloromethylcyclohexa-2,5-dien-1-one)rhodium with Pd(PPh₃)₄. The reaction occurs with retention of the metal coordination affording a sevenmembered organometallic derivative of the nonbenzoid aromatic series, namely, (η⁵-cyclopentadienyl)(η⁴-4-chloro-5-menthylcyclohepta-2,4,6-trien-1-one)rhodium, whose structure was established by means of elemental analysis, NMR, and mass-spectral data. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1255–1256, June, 1998.     

Potential energy surfaces and nonadiabatic transitions in the asymptotic regions of ICN photodissociation to study the interference effects in the F1 and F2 spin-rotation levels of the CN products

One of the most spectacular yet unsolved problems for the ICN -band photodissociation is the non-statistical spin-rotation F₁ = N + 1/2 and F₂ = N − 1/2 populations for each rotation level N of the CN fragment. The F₁/F₂ population difference function f(N) exhibits strong N and λ dependences with an oscillatory behavior. Such details were found to critically depend on the number of open-channel product states, namely, whether both I (²P_3/2) and I (²P_1/2) are energetically available or not as the dissociation partner. First, in the asymptotic region, the exchange and dipole-quadrupole inter-fragment interactions were studied in detail. Then, as the diabatic basis, we took the appropriate symmetry adapted products of the electronic and rotational wavefunctions for the F₁ and F₂ levels at the dissociation limits. We found that the adiabatic Hamiltonian exhibits Rosen–Zener–Demkov type nonadiabatic transitions reflecting the switch between the exchange interaction and the small but finite spin-rotation interaction within CN at the asymptotic region. This non-crossing type nonadiabatic transition occurs with the probability 1/2, that is, at the diabatic limit through a sudden switch of the quantization axis for CN spin S from the dissociation axis to the CN rotation axis N . We have derived semiclassical formulae for f(N) and the orientation parameters with a two-state model including the 3A′ and 4A′ electronic states, and with a four-state model including the 3A′ through 6A′ electronic states. These two kinds of interfering models explain general features of the F₁ and F₂ level populations observed by Zare's group and Hall's group, respectively. © 2018 Wiley Periodicals, Inc.     

Capillary electrophoresis determinative and GC-MS confirmatory method for water-soluble organic acids in airborne particulate matter and vehicle emission

Urban fine airborne particulate matter (PM2.5) and vehicle emission samples were studied for water-soluble low-molecular-weight carboxylic acids using CE with indirect UV detection. Further identification of these acids was achieved using GC-MS as their butyl esters (after derivatization with BF3/butanol). Several dicarboxylic acids in the range C2-C10 including straight-chain, branched-chain, cis- and trans-unsaturated, and aromatic acids were confirmed by GC-MS. In addition, aromatic acids such as benzoate, phthalate, terephthalate, isophthalate, and 4-methylphtalate were present in such samples, but some of these were not well resolved by the used CE method. Oxocarboxylic acids (Cn(w) with n > 4) were also identified by GC-MS but not determined by CE due to lack of standards. The rapidity and simplicity of the CE method were clearly demonstrated, and the method was observed to be advantageous for routine monitoring of water-soluble organic acids in airborne PM2.5 and vehicle emission at low microg/L levels.     

Adsorption of Eu(III) on titanate nanotubes studied by a combination of batch and EXAFS technique

The effects of pH,contact time and natural organic ligands on radionuclide Eu(Ⅲ) adsorption and mechanism on titanate nanotubes(TNTs) are studied by a combination of batch and extended X-ray absorption fine structure(EXAFS) techniques.Macroscopic measurements show that the adsorption is ionic strength dependent at pH < 6.0,but ionic strength independent at pH > 6.0.The presence of humic acid(HA) /fulvic acid(FA) increases Eu(Ⅲ) adsorption on TNTs at low pH,but reduces Eu(Ⅲ) adsorption at high pH.The results of EXAFS analysis indicate that Eu(Ⅲ) adsorption on TNTs is dominated by outer-sphere surface complexation at pH < 6.0,whereas by inner-sphere surface complexation at pH > 6.0.At pH < 6.0,Eu(Ⅲ) consists of ～ 9 O atoms at REu?O ≈ 2.40  in the first coordination sphere,and a decrease in NEu-O with increasing pH indicates the introduction of more asymmetry in the first sphere of adsorbed Eu(Ⅲ).At long contact time or high pH values,the Eu(Ⅲ) consists of ～2 Eu at REu-Eu ≈ 3.60  and ～ 1 Ti at REu-Ti ≈ 4.40 ,indicating the formation of inner-sphere surface complexation,surface precipitation or surface polymers.Surface adsorbed HA/FA on TNTs modifies the species of adsorbed Eu(Ⅲ) as well as the local atomic structures of adsorbed Eu(Ⅲ) on HA/FA-TNT hybrids.Adsorbed Eu(Ⅲ) on HA/FA-TNT hybrids forms both ligand-bridging ternary surface complexes(Eu-HA/FA-TNTs) as well as surface complexes in which Eu(Ⅲ) remains directly bound to TNT surface hydroxyl groups(i.e.,binary Eu-TNTs or Eu-bridging ternary surface complexes(HA/FA-Eu-TNTs)).The findings in this work are important to describe Eu(Ⅲ) interaction with nanomaterials at molecular level and will help to improve the understanding of Eu(Ⅲ) physicochemical behavior in the natural environment.     

基于现场可编程门阵列单探测器复合轴控制技术

为了解决空间激光通信系统中单探测器复合轴结构的粗精解耦难题,通过分析二维关联控制矩阵,得出粗精跟踪解耦的必要条件,提出了一种单探测器复合轴结构的工作方式.在跟踪过程中,相机直接配合子轴执行器完成精跟踪工作,而主轴的跟踪信息由子轴的角度偏转器来提供,同时所有的图像处理算法、位置检测算法、以及粗精伺服控制算法都在现场可编程门阵列中实现,完成了系统的轻小型化设计.实验搭建了测试系统,并对现场可编程门阵列硬件和系统跟踪性能进行测试,结果表明单探测器复合控制系统可以实现跟踪准确度优于3μrad,为工程化奠定了良好的基础.     

LDI学生成绩评价方法的构建——以精细化学品化学课程为例

根据我院化工专业精细化学品化学课程改革的实际，围绕以评促学、以评助教，构建了LDI学生课程成绩评价方法。该方法以教师和学生为评价主体，从3个环节（理论学习、课内实验、创新实践）、4个维度（课前自学、课堂学习、课内实验与创新实践、期末考试）入手，将评价内容分为多个项目来引导学生学习、实践，并全面考核学生的知识与能力。该法不仅能提高学生学习的主动性，还能潜移默化地培养学生的创新意识和团队精神。