基于粗糙集理论的知识约简及应用实例

在保持分类能力不变的前提下 ,通过利用粗糙集理论中的知识约简方法 ,在保护知识库分类不变的条件下 ,删除其中不相关或不重要的知识 ,从而导出问题的决策 .利用基于决策表的粗糙集模型算法 ,实例分析如何数字化表示决策表 ,并对其进行属性约简和属性值的约简 ,从而提取决策规则 .     

度和与图中具有给定阶数的点不交的路

设G是一个n阶图，n=∑^ki=1ni，其中,ni≥2(i=1,2,…，k）是整数。我们利用度和给出图G中存在n1,n2，…，nk阶点不交路的充分条件。     

Injection locked multi-section gain-coupled dual mode DFB laser for terahertz generation

A dual mode multi-section gain-coupled distributed feedback laser with tunable mode spacing is subharmonically injection locked at 0.315 THz. The injected signal consists of an optical comb with harmonics 35 GHz apart and a bandwidth of approximately 1.9 THz. The optical comb is a result of strong four-wave mixing in a highly-nonlinear dispersion-shifted fiber. In order to observe locking of the multi-section laser, the output is optically downconverted to RF frequencies using the same optical comb. The locked multi-section DFB laser is a coherent and tunable optical source suitable for continuous-wave terahertz generation systems.     

Weighted mean velocity feedback strategy in intelligent two-route traffic systems

Information feedback strategies can influence the traffic efficiency of intelligent traffic systems greatly. Based on the more practical symmetrical two-route scenario with one entrance and one exit, an improved Weighted Mean Velocity Feedback Strategy (WMVFS) is proposed, which is not sensitive to the precision of Global Position System (GPS) devices. The applicability of WMVFS to different weight factors, aggressive probabilities, densities of dynamic vehicles, and different two-route scenarios (symmetrical scenario and asymmetrical scenario with a speed limit bottleneck) is analyzed. Results show that WMVFS achieves the best performance compared with three other information feedback strategies when considering the traffic flux and stability.     

少节点基因调控网络的控制

近年来,自组织振荡网络受到越来越多科学家的关注,对生物体的生长、发育起调控作用的基因调控网络即是其中的一种.本文研究了少节点基因调控网络的控制问题.运用多相位超前驱动方法对该种网络进行调控,可以有效地提高对网络的控制效率.通过数值模拟,发现对于少节点基因调控网络,当系统参数确定时,网络的有效控制率可以达到95％以上(10节点网络);当系统参数不确定时,控制的效率也非常高.     

运用量子约束动力学对具有耗散的量子位的追踪控制

在有限温度环境内，量子约束动力学及其追踪控制可使退相干系统的相干性稳定一段时间.约束方程产生的控制场能够按量子比特的动力学状态进行控制(量子动力学轨道的反馈控制)；依靠量子比特的这种反馈效应，可使量子位稳定在设定的时间内.同时，在量子位的稳定方面，温度扮演一种消极的角色. 关键词： 量子约束动力学 耗散量子位的控制 追踪控制 量子比特的反馈效应     

外腔反馈对半导体激光器振荡特性的影响

通过有效反射系数的引入，根据激光谐振腔的自再现条件和对腔内光子密度、载流子密度方程的求解，分析了外腔反馈对半导体激光器的阈值增益、振荡频率和输出功率等振荡特性的影响，并通过实验进行了验证.外腔反馈后，半导体激光器的阈值电流从420mA降为370mA，输出功率的斜率效率获得了提高，理论计算的输出功率曲线与实验结果符合的很好. 关键词： 半导体激光器 外腔反馈 振荡特性     

Chaotic oscillations and noise transformations in a simple dissipative system with delayed feedback

We analyze the statistical behavior of signals in nonlinear circuits with delayed feedback in the presence of external Markovian noise. For the special class of circuits with intense phase mixing we develop an approach for the computation of the probability distributions and multitime correlation functions based on the random phase approximation. Both Gaussian and Kubo-Andersen models of external noise statistics are analyzed and the existence of the stationary (asymptotic) random process in the long-time limit is shown. We demonstrate that a nonlinear system with chaotic behavior becomes a noise amplifier with specific statistical transformation properties.     

弱光反馈对相干光差分相移键控系统性能的影响

本文讨论了弱光反馈对相干光差分相移键控系统误码率的影响。指出:在适当的反馈条件下,弱光反馈可以改善系统的误码率性能。     

A Suitable Active Control for Suppression the Vibrations of a Cantilever Beam

In our consideration, a comparison between four different types of controllers for suppression the vibrations of the cantilever beam excited by an external force is carried out. Those four types are the linear velocity feedback control, the cubic velocity feedback control, the non-linear saturation controller (NSC) and the positive position feedback (PPF) controller. The suitable type is the PPF controller for suppression the vibrations of the cantilever beam. The approximate solution obtained up to the first approximation by using the multiple scale method. The PPF controller effectiveness is studied on the system. We used frequency-response equations to investigate the stability of a cantilever beam. We notified that, there is a good agreement between the analytical solution and the numerical solution.