离化团簇束法制备c轴取向的ZnO薄膜

为了探索低温可调控ZnO薄膜沉积技术,提出了一种新的ZnO薄膜制备方法,即离化团簇束（ICB）法,并自行设计研制了应用该方法制备ZnO薄膜的专门装置.采用超音速喷嘴获得高速锌原子团簇束,用Hall等离子体源产生氧离子束离化锌原子团簇,获得了较高的离化率.在沉积过程中,可以通过调节衬底偏压、氩氧比、衬底加热温度等参数,来控制成膜的质量;应用这个装置成功地在硅衬底上制备的ZnO薄膜,经XRD和EDS检测,薄膜的c轴取向一致,Zn、O原子百分比接近于1：1,成膜质量好.     

Interference of circularly polarized light: contrast and application in fabrication of three-dimensional periodic microstructures

The contrast of interference pattern formed by two circularly polarized waves and by a linearly polarized wave and a circularly polarized one is discussed. The results are compared with that by two linear beams. It shows that the use of circular light in holographic fabrication of three-dimensional periodic microstructures may remove the necessity of beam ratio and polarization optimization needed in the interference of three linear noncoplanar beams and improve the uniform contrast of resultant pattern simultaneously.     

Simultaneous Measurement of Particle Size and Particle Velocity by the Spatial Filtering Technique

The objective of this study was to compare the measuring results of a fiber‐optical probe based on a modified spatial filtering technique with given size distributions of different test powders and also with particle velocity values of laser Doppler measurements. Fiber‐optical spatial filtering velocimetry was modified by fiber‐optical spot scanning in order to determine simultaneously the size and the velocity of particles. The fiber‐optical probe system can be used as an in‐line measuring device for sizing of particles in different technical applications. Spherical test particles were narrow‐sized glass beads in the range 30–100 μm and irregularly shaped test particles were limestone particles in the range 10–600 μm. Particles were dispersed by a brush disperser and the measurements were carried out at a fixed position in a free particle‐laden air stream. Owing to the measurement of chord lengths and to the influence of diffraction and divergent angle, the probe results show differences from the given test particle sizes. Owing to the particle‐probe collisions, the mean velocity determined by the probe is smaller than the laser Doppler mean velocity.     

Flow in a waterfall with large Froude number

An approximate method is developed to solve the full nonlinear equations governing two-dimensional irrotational flow in a free waterfall, falling under the influence of gravity, at high Froude number based on conditions far upstream. Schwarz—Christoffel transformation is used to map the region, in the complex potential-plane, onto the upper half-plane. The Hilbert transformation as well as the perturbation technique, for large Froude number, are used as a basis for the approximate solution of the problem. A complete solution, up to second-order approximation, for the downstream free-surfaces profiles, for different Froude number, is discussed and illustrated. The obtained approximate solutions are compared with those of other authors. Favourable agreement with other results suggests that this method is effective in dealing with flow problems strongly influenced by gravity and high Froude number. The results obtained by this method are sufficiently accurate for practical purposes.     

Comparison of Two Reformulation-Linearization Technique Based Linear Programming Relaxations for Polynomial Programming Problems

In this paper, we compare two strategies for constructing linear programmingrelaxations for polynomial programming problems using aReformulation-Linearization Technique (RLT). RLT involves an automaticreformulation of the problem via the addition of certain nonlinear impliedconstraints that are generated by using the products of the simple boundingrestrictions (among other products), and a subsequent linearization based onvariable redefinitions. We prove that applying RLT directly to the originalpolynomial program produces a bound that dominates in the sense of being atleast as tight as the value obtained when RLT is applied to the jointcollection of all equivalent quadratic problems that could be constructed byrecursively defining additional variables as suggested by Shor.     

PERIODIC BOUNDARY VALUE PROBLEM FOR SECOND ORDER FUNCTIONAL DIFFERENTIAL EQUATIONS

This paper investigates the periodic boundary value problems for a class of second order functional differential equations. The monotone iterative technique and the maximum principle are applied to obtain the existence of maximal and minimal solutions.     

Stability analysis of abnormal multiplication of plankton using parameter identification technique

This paper presents the mathematical approach for the abnormal multiplication of plankton. An abnormal multiplication can be expressed as an unstable problem and the stability of the system is investigated by introducing eigenvalues of a mathematical equation. The stability of the system can be judged by an eigenvalue based on the Lyapunov's stability theory. In this paper, the Arnoldi‐QR method is used to obtain eigenvalues and eigenvectors of the system. The mode superposition method is employed to create spatial distribution needed to analyse the stability. To obtain the objective eigenvalue, the parameter identification technique is employed. The finite element method is used for the discretization in space. Lake Kasumigaura, which is located in Ibaraki Prefecture in Japan, is selected and actual data in 1975, 1976, 1991 and 2000 are used in order to investigate the stability of the specified lake in Japan. Copyright © 2004 John Wiley & Sons, Ltd.     

An embedding domain approach for a class of 2-d shape optimization problems: mathematical analysis

This contribution combines a shape optimization approach to free boundary value problems of Bernoulli type with an embedding domain technique. A theoretical framework is developed which allows to prove continuous dependence of the primal and dual variables in the resulting saddle point problems with respect to the domain. This ensures the existence of a solution of a related shape optimization problem in a sufficiently large class of admissible domains.     

关于无界无限维商品空间上的生产经济均衡

本文研究了无界无限维商品空间上的生产经济均衡的存在性．虽然我们把商品空间看成是Ｒｉｅｓｚ空间，但并没有在它的正锥上作任何内部假设．同时我们的结果也为现代企业或公司从事经济预测、制订生产计划、改善经营管理、提高劳动生产率以及优化经济机制提供了理论依据．