Synthesis of 1,1-dihydroperfluorooxaalkan-1-ols and their interaction with terephthaloyl chloride

A series of 1,1-dihydroperfluorooxaalkan-1-ols and ,,,-tetrahydroperfluorooxaalkanediols has been synthesized. Some tercphthalates were synthesized by the reaction of these alcohols and diols with terephthaloyl chloride.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1573–1576, June, 1996.     

The electronic structure of molecules by a many-body approach

The vertical valence ionization potentials of cyclopropane, ethylene oxide and ethylene imine are calculated by a many-body Green's function method. For C₃H₆ the ordering of the ionization potentials is 2e(), 1e(), 2a₁(), 1a₂(), 1e(). The assignment of the 2a₁ and the 1a₂ ionization potentials which has been controversial is thus clarified. The ordering is in agreement with the result obtained via Koopmans' theorem. For ethylene oxide and ethylene imine Koopmans' theorem fails in predicting the correct order of ionic states. For C₂H₄O the ordering of the ionization potentials is 2b ₁(), 4a ₁, 1a ₂(), 2b ₂,3a ₁, 1b ₁(), 1b ₂, 2a ₁ and for C₂H₅N 6a, 5a, 3a, 2a, 4a, 3a, 1a, 2a. The agreement of the computed ionization potentials with the experimental values is very satisfactory.     

Compehensive two-dimensional gas chromatography (GC×GC) and its applicability to the characterization of complex (petrochemical) mixtures

In general, petrochemical products contain only a limited number of chemical classes of compounds (sample dimensionality). The enormous number of individual components within these classes, however, soon puts limitations upon a single chromatographic technique when it comes to adequate characterization of these products. Comprehensive two-dimensional gas chromatography (GC×GC) clearly opens the possibility of estimating the composition of hydrocarbon mixtures in a far more detailed fashion than hitherto possible. Although the emphasis of papers of GCxGC thus far almost exclusively applies to the unsurpassed peak-capacity, in the oil industry there is a need for characterization, rather than for analyzing all the individual compounds. In principle a GCxGC system can provide an almost perfect match between its intrinsic properties and the dimensionality of oil samples. To establish the applicability of GCxGC towards petrochemical analytical challenges, a commercially aavailable prototype instrument was subjected to an exhaustive characterization of a typical hydrocarbon precess stream and a fast characterization of a light gas oil. Although there are no fundamental limitations towards the quantitative aspects of a GCxGC system, this paper confines itself to qualitative results only. Quantitative aspects of GCxGC will be published in a forthcoming paper.     

Carob pod: A new substrate for citric acid production by Aspergillus niger

The production of citric acid from carob pod extract byA. niger in surface fermentation was investigated. A maximum citric acid concentration (85.5 g/L), citric acid productivity (4.07 g/L/d), specific citric acid production rate (0.18 g/g/d), and specific sugar uptake rate (0.358 g/g/d) was achieved at an initial sugar concentration of 200 g/L, pH of 6.5, and a temperature of 30°C. Other kinetic parameters, namely, citric acid yield, biomass yield, specific biomass production rate, and fermentation efficiency were maximum at pH 6.5, temperature 30°C, and initial sugar concentration 100 g/L. The external addition of methanol into the carob pod extract at a concentration up to 4% (v/v) improved the production of citric acid.     

N- and O-Alkylation of 3-indolylcyclopropylacetic acid derivatives

2,2-Dimethyl-3-(2-methyl-3-indolyl)cyclopropylacetic acid, its amide and esters, and the corresponding alcohol, viz., the product of ester reduction by LiAlH₄, were synthesized. The chemoselectivity of N- and O-alkylation of these compounds was studied. Selective monoalkylation at the nitrogen atom of the heterocycle, O-alkylation to the side chain, or dialkylation at both nucleophilic sites can be carried out under conditions of phase-transfer catalysis. The N-acylation at the indole fragment of nitrile of this acid occurs only under the Vilsmeier—Haak formylation conditions.     

Uniform Rice-like CdS Particles Prepared from Water-in-oil Microemulsions

IntroductionNano-sized semiconductors are of great interestdue to their special optical and electronic proper-ties[1,2].As one of the mostimportantⅡ—Ⅵsemicon-ductors,CdS has importantapplications in many fields,such as the solar cell field,non linear o…     

Structure and magnetic properties of Ca14MnP11

The compound Ca₁₄MnP₁₁ crystallizes in the Ca₁₄AlSb₁₁ structure type with the tetragonal space group I4₁/acd (Z=8) and lattice parameters of , c=20.7565(9) at 90 K. The structure consists of MnP₄⁹⁻ tetrahedron, P₃⁷⁻ trimer, 4 P³⁻ isolated anions and 14 Ca²⁺ cations. Similar to other compounds of this structure type containing phosphorous, the P₃⁷⁻ trimer has a central P atom that is best modeled in the structure as being equally split between two sites. In addition, there is no additional distortion of the manganese-containing tetrahedron compared with the main group analog, Ca₁₄GaP₁₁, suggesting that the Mn oxidation state is Mn²⁺. Temperature-dependent magnetic susceptibility shows that the compound is paramagnetic over the entire temperature range measured (2-300 K). The data can be fit with a modified Curie-Weiss law and provide an effective magnetic moment of 5.80 (2) B.M. with a Weiss constant of −2.13(2) K and . This moment is significantly higher than those measured for any of the Mn-containing analogs and is consistent with Mn²⁺. This result will be discussed in light of the electron counting scheme for Mn compounds of the Ca₁₄AlSb₁₁ structure-type.     

The Flipping of CO Ligand Groups in Metal Carbonyl Compounds and its Frequency in Fe(CO)5

It has been proven qualitatively by a number of authors using variable temperature NMR experiments that most metal carbonyl complexes are nonrigid. A quantitative determination of the ligand exchange frequency v_e is often achieved by a line shape analysis or by measurement of the transverse relaxation time T₂ using the Carr-Purcell method. In the case of a “very fast” exchange, however, both methods prove unsuccessful. It is shown in this study that a simultaneous fit of IR or Raman spectra on the one hand and NMR spectra on the other can make possible the determination of v_e for the “very fast” exchange and can also facilitate the determination of v_e in “slow” and “medium” exchange cases considerably. The ligand exchange frequency thus found for Fe(CO)₅, 1.1 × 10¹⁰s^?1, is unexpectedly high; comparison with variable temperature measurements on solid Fe(CO)₅, yields similar energy barriers. A mechanism of exchange closely related to the “Berry mechanism” is proposed. Finally the consequences of this surprisingly large ligand exchange rate are discussed with respect to IR band assignments for molecular “fragments” M(CO)^x (where x=coordination number, and M is a transition metal, typically lanthanoid or actinoid).     

The complete symmetrization of quantum operators: new thoughts on an old problem

The complete symmetrization with respect to x, p _x,... of the operators associated with dynamical properties can sometimes lead to results different from those obtained by the conventional quantum formalism based on the rule op (A ²)=(op A)². For example, angular momentum operators M _z ² and M ² are modified by the additive constants ²/2 and 3 ²/2 respectively (M ²0 for electron in the ground state of H atom, rotator never at rest, but spectra unchanged); the average quadratic dispersion of energy is different from zero. These results can be interpreted by assuming that the system is never strictly isolated but communicates with the other systems of the universe by means of electromagnetic interactions. Quantum mechanics would give only average values over a sufficiently long time and would exhibit a quasi-ergodic character. Examples supporting this possibility are given, in particular that of arsines for which quantum forecasts correspond to average values over one year.Dedicated to Professor J. Koutecký on the occasion of his 65th birthday     

Emission characteristics of high-powered microwave induced plasma optical emission spectrometry by using nitrogen–oxygen mixture gas

A high-powered, microwave-induced nitrogen–oxygen plasma (N₂–O₂–MIP) generated by using an Okamoto cavity at atmospheric pressure was investigated when the observation height, the flow rate of carrier gas, and the oxygen content were varied as the experimental parameters. The emission characteristics of the plasma were evaluated with regard to the excitation temperature and the intensity ratio of atomic line to ionic line. The excitation temperature of the N₂–O₂–MIP was in the range of 5100–5700 K when the oxygen content was varied from 0 to 30% at the observation height of 7 mm and the carrier gas flow rate of 0.6 l/min. The intensity ratio of atomic line to ionic line was elevated with an increase in the oxygen content.