Electro-optic mapping systems of electric-field using CW laser diodes

Two novel systems are proposed to perform the electro-optic (EO) mapping of the electric-field strength close to electrode structure using CW laser diodes. By these systems, mappings of both static (DC) and high-frequency electric-field can be obtained. For the static field, the field is chopped to increase the sensitivity performance. For the high-frequency field, an intensity modulation laser, instead of a pulse laser, is used to perform the mapping measurement in frequency domain, instead of in time domain. This approach greatly simplifies the system. An experiment set-up using a vertical cavity surface emitted laser diode (VCSEL) of a wavelength 850 nm and its mapping results for a coplanar waveguide (CPW) with the signal frequency around 1 GHz are reported.     

Real-time sensing and three-dimensional display of far outdoor scenes based on asymmetric integral imaging

A new asymmetric integral imaging (AII) system for real-time pickup and three-dimensional (3-D) display of far outdoor scenes based on dynamic-pixel-mapping (DPM) is proposed. DPM is a digital process to transform the elemental images captured with a lens array into the perspective-variant object images (POIs) whose structures are matched with those of display lenses, where the orders of pixels in each POI are reversely mapped, and then capture a set of virtual elemental images (EIs) at the specific depth planes from the back-propagated POIs. This DPM enables an asymmetrical use of pickup and display lens arrays, allowing the long-ranged pickup of far outdoor scenes and their resolution-enhanced 3-D reconstruction. Experiments with a pair of pickup and display lens arrays whose pitches and focal lengths are given by 7.5 mm, 30 mm and 1.2 mm, 8 mm, respectively, show that the effective pickup-range and resolution of the proposed system have been increased up to 6 m and 1600×1600 pixels, respectively, from 0.064 m and 480×480 pixels of the conventional systems employing the same pickup and display lens arrays. In addition, experiments with an implemented test bed confirms that the proposed system can provide real-time 3-D images in 25 frames per second.     

Boiti-Leon-Pempinelli系统的新变量分离解及其方形孤子和分形孤子

利用拓展的Riccati方程映射法，得到了(2+1)维Boiti-Leon-Pempinelli系统新的变量分离 解．根据得到的分离变量解，构造出该系统新型的孤子结构——方孤子和分形孤子． 关键词： Boiti-Leon-Pempinelli系统 拓展Riccati映射 方形孤子 分形孤子     

基于像散法的线阵CCD相机检焦技术

航天立体测绘相机受卫星发射过程的振动、冲击以及复杂的空间环境的影响,相机的靶面将不同程度地偏离相机的焦平面,导致图像分辨率下降.对于测绘相机,其主点位置和主距变化量直接影响地面目标定位准确度.为了弥补利用编码器进行检焦的不足,提出了一种基于像散量的检调焦方法.该方法采用四象限光电探测器测量相机靶面变化引起的像散量,参照已标定的靶面位置与像散量之间的关系,计算出靶面偏离相机焦平面的实际大小和方向.这种检焦方法包含引起相机靶面离焦的所有因素,试验结果表明,基于像散法的测绘相机调焦机构的分辨率可达0.025 mm.     

Development of a “Built-in” Scanning Near Field Microscope Head for an Atomic Force Microscope System and Stress Mapping of an Al2O3/ZrO2 Eutectic Composite

We constructed a scanning near-field optical microscope (SNOM) on a commercially available atomic force microscopy (AFM) apparatus (SPM-9500J2; Shimadzu Corp.) to measure the stress distribution in ceramic composite materials. Features of our SNOM system are: (1) a compact SNOM head substituted for the original AFM head; (2) a wide scanning range (125 × 125 μm²) inherited from the original scanner; (3) use of conventional shear-force regulation; (4) an optical system for the illumination-collection (I-C) mode; (5) excitation by a 488 nm line of an Ar-ion laser, and (6) light detection by photon counting or a polychromator equipped with an electronically cooled charge coupled device (CCD). This SNOM system was used to measure the surface structure and stress distribution of an Al₂O₃/ZrO₂ eutectic composite. We simultaneously measured topographic images and fluorescence spectra of an Al₂O₃/ZrO₂ eutectic composite. We estimated its peak intensity, peak position, and peak width from the fluorescence spectrum during scanning, which respectively correspond to the abundance of Al₂O₃, stress in the grain, and the anisotropy of that stress. Mapping images showed that the stress and its anisotropy were weaker in the center of the Al₂O₃ grain than its boundary between Al₂O₃ and ZrO₂. That observation suggests that Al₂O₃ underwent intense anisotropic stress induced by volume expansion in the phase transition of ZrO₂ from the cubic phase to the monoclinic phase during preparation.     

Context sensitive noise impact mapping

Apartments that are exposed to the same level of road traffic noise on front of the most exposed façade often have very different neighbourhood soundscapes. In the first part of this paper, a neighbourhood soundscape adjusted exposure indicator, NAL_den, is derived. NAL_den-values are designed to be used as input to traditional exposure-effect relationships to improve annoyance impact estimates. In the second part, generic spatial procedures are developed and implemented. These produce map presentations in the form of contiguous neighbourhood quality areas. The quality of each neighbourhood is determined from the predicted annoyance impacts for residents. Noise impact maps provide experts, politicians, and the public with high-level impact visualizations of condensed status, “what-if” and scenario information. Results and illustrations are based on data from the Norwegian socio-environmental survey database, and a comprehensive national noise mapping effort. The methodology should work well for mapping Europe’s “black” and “grey” areas.     

双参数变形量子代数SU（1，1）_（q，s）的Nodvik实现和Holstein—Primakoff实现

给出了双参数变形量子代数ＳＵ（１，１）ｑ，ｓ的Ｎｏｄｖｉｋ实现和Ｈｏｌｓｔｅｉｎ－Ｐｒｉｍａｋｏｆｆ实现，并给出了ＳＵ（１，１）ｑ，ｓ，和双参数变形振子的变形映射。     

一款宽光谱鱼眼镜头的设计

讨论了一款用于监控侦查的鱼眼镜头设计.首先根据使用要求,选择了可以由图像直接提取出目标方位信息的等距离投影方式;又由系统对目标分辨率的要求,选择了焦距相对较长的全帧成像形式.通过合理布局系统结构及材料选择,使各种像差得到较好的校正,并通过加大光阑慧差改善系统照度均匀性.最终设计出工作波段486～900nm,视场180°,F/2.8的宽光谱鱼眼镜头,设计结果系统全视场在乃奎斯特频率63lp/mm处的调制传递函数大于0.3,边缘视场照度大于中心视场照度的50%,f-θ畸变小于3%,各项指标满足系统要求.     

光谱地质剖面在蚀变填图中的应用研究

利用遥感数据可以提取与成矿有关的蚀变信息,地质剖面可以为所提取的蚀变信息的验证和深入理解提供依据;结合地质剖面和光谱信息提取的思路提出光谱地质剖面的概念。光谱剖面可以实现光谱沿剖面的存储、显示,而光谱地质剖面的目的主要是得到蚀变类型、矿物含量等参数沿剖面线的分布, 实现蚀变矿物组合空间分带信息的提取。综合现有蚀变信息提取方法建立了光谱地质剖面信息提取的技术方法和流程, 利用地面实测光谱建立了光谱地质剖面,并在光谱地质剖面的支持下利用图像进行蚀变信息的提取和分析,探讨了光谱地质剖面在蚀变分带和遥感找矿模式中的意义和作用,光谱地质剖面的建立有助于图像和地面光谱的一体化分析,有助于蚀变填图中信息的精确提取。     

In situ three‐dimensional reciprocal‐space mapping during mechanical deformation

Mechanical deformation of a SiGe island epitaxically grown on Si(001) was studied by a specially adapted atomic force microscope and nanofocused X‐ray diffraction. The deformation was monitored during in situ mechanical loading by recording three‐dimensional reciprocal‐space maps around a selected Bragg peak. Scanning the energy of the incident beam instead of rocking the sample allowed the safe and reliable measurement of the reciprocal‐space maps without removal of the mechanical load. The crystal truncation rods originating from the island side facets rotate to steeper angles with increasing mechanical load. Simulations of the displacement field and the intensity distribution, based on the finite‐element method, reveal that the change in orientation of the side facets of about 25° corresponds to an applied pressure of 2–3 GPa on the island top plane.