Interaction of the important species HNO and HFSO2 in the atmosphere: Theoretical study of the N?H and S?H blue‐shifted hydrogen bonds

Ab initio molecular orbital and density functional theory (DFT) in conjunction with different basis sets calculations were performed to study the N? H…O and S? H…O blue‐shifted H‐bonds in the HNO…HFSO₂ complex. The geometric structures, vibrational frequencies, and interaction energies were calculated by both standard and CP‐corrected methods. Natural bond orbital (NBO) analysis was used to investigate the origin of blue‐shifted H‐bonds, showing that the decrease in the σ*(N? H) and σ*(S? H) is due to the electron density redistribution effect. The structure reorganization effect on the blue‐shifted hydrogen bonds was discussed in detail. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Electrochemical Evaluation of the Interaction between Avidin and Biotin at Biotinylated Polypyrrole Electrode Using a Redox Marker

The interaction between avidin and biotin was evaluated electrochemically by monitoring the change in the electrode response of redox markers. Biotin was immobilized on the electrode surface by means of the electrochemical polymerization of biotinylated pyrrole and pyrrole. When avidin was introduced onto the biotinylated polypyrrole electrode surface, the large change in the electrode response of the redox marker was detected. The fact that the change in the electrode response of a marker ion could be attributed to the electrostatic interaction between avidin on the electrode surface and the redox marker ion present in a solution was verified by replacing avidin with NutrAvidin. At a pH lower than the isoelectric point of avidin, the electrode response of ferrocyanide as an anionic marker ion increased linearly within the range of 5.0×10^?9 ?3.0×10^?8 M avidin. The relative standard deviation at 1.5×10^?8 M avidin was about 5.4% (n=5). The detection of biotin was also performed using a competitive reaction between biotin in solution and biotin that had been immobilized on the electrode surface in the form of the biotinylated polypyrrole.     

Synthesis,optical, and electrochemical properties of novel copolymers on the basis of benzothiadiazole and electron‐rich arene units

Novel alternating conjugated copolymers ( P1–P6 ) consisting of an electron‐deficient benzothiadiazole and a variety of electron‐rich thiophene‐arene‐thiophene units were synthesized by palladium‐catalyzed polycondensations (Stille and Suzuki reactions), aiming at processable materials with a reduced optical band gap. The structures of P1–P6 were confirmed by ¹H NMR and ¹³C NMR, and their molecular weights were determined by size exclusion chromatography. In the Suzuki polycondensation, the role of the catalyst [Pd(PPh₃)₄ and Pd(OAc)₂] on the resulting molecular weight was investigated. Pd(OAc)₂ enhances the molecular weight of the polymers for both thiophene and phenylene bis‐boronic esters as compared with Pd(PPh₃)₄. The optical properties of the polymers were examined in solution and the solid state. The polymers with n‐octyl substituents ( P1 , P4 , P5 , and P6 ) on the thiophene rings possessed less‐planar structures as a result of torsional steric hindrance, and their absorption spectra appeared blueshifted as compared with their unsubstituted analogues ( P2 and P3 ). The electrochemical properties of the polymers were studied using cyclic voltammetry. Although the alkyl substitution affects the oxidation potential, only marginal differences in the reduction potentials were observed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2360–2372, 2002     

Synthesis and properties of new soluble aromatic polyamides and polyimides on the basis of N,N′‐bis(3‐aminobenzoyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine

A new N‐phenylated amide (N‐phenylamide) unit containing aromatic diamine, N,N′‐bis(3‐aminobenzoyl)‐N,N′‐diphenyl‐1,4‐phenylenediamine, was prepared by the condensation of N,N′‐diphenyl‐1,4‐phenylenediamine with 3‐nitrobenzoyl chloride, followed by catalytic reduction. Two series of organosoluble aromatic poly(N‐phenylamide‐imide)s and poly(N‐phenylamide‐amide)s with inherent viscosities of 0.58–0.82 and 0.56–1.21 dL/g were prepared by a conventional two‐stage method and the direct phosphorylation polycondensation, respectively, from the diamine with various aromatic dianhydrides and aromatic dicarboxylic acids. All polyimides and polyamides are amorphous and readily soluble in many organic solvents such as N,N‐dimethylacetamide and N‐methyl‐2‐pyrrolidone. These polymers could be solution cast into transparent, tough, and flexible films with high tensile strengths. These polyimides and polyamides had glass‐transition temperatures in the ranges of 230–258 and 196–229 °C, respectively. Decomposition temperatures of the polyimides for 10% weight loss all occurred above 500 °C in both nitrogen and air atmospheres. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2564–2574, 2002     

1,4‐Addition polymerization of 1,4‐bis(4‐benzylpyridinium)butadiyne triflate in a dipolar aprotic solvent

1,4‐Bis(4‐benzylpyridinium)butadiyne triflate was aggregated in dimethylformamide and spontaneously converted into the 1,4‐addition type of polydiacetylene. The polymerization took place in a dipolar aprotic solvent with a large dielectric constant that could enhance the aggregation of the ionic diacetylene salt through the electrostatic interaction. The molecular weight of the diacetylene was leveled off after 30 h at 80 °C to reach 1.5 × 10⁴ (number‐average molecular weight) that consisted of the 1,4‐addition type of polydiacetylene similar to polydiacetylenes obtained in the conventional solid‐state polymerization. Electron spin resonance spectra revealed that diradicals were generated at the earlier state aggregation to give rise to a solution polymerization. The UV spectra also suggested the presence of the activated aggregation associated with the polymerization as well as the eximer emission spectra. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3534–3541, 2002     

Synthesis and characterization of block copolymers from 2‐vinylnaphthalene by anionic polymerization

The anionic polymerization of 2‐vinylnaphthalene (2VN) has been studied in tetrahydrofuran (THF) at ?78 °C and in toluene at 40 °C. 2VN polymerization in THF, toluene, or toluene/THF (99:1 v/v) initiated by sec‐butyllithium (sBuLi) indicates living characteristics, affording polymers with predefined molecular weights and narrow molecular weight distributions. Block copolymers of 2VN with methyl methacrylate (MMA) and tert‐butyl acrylate (tBA) have been synthesized successfully by sequential monomer addition in THF at ?78 °C initiated by an adduct of sBuLi–LiCl. The crossover propagation from poly(2‐vinylnaphthyllithium) (P2VN) macroanions to MMA and tBA appears to be living, the molecular weight and composition can be predicted, and the molecular weight distribution of the resulting block copolymer is narrow (weight‐average molecular/number‐average molecular weight < 1.3). Block copolymers with different chain lengths for the P2VN segment can easily be prepared by variations in the monomer ratios. The block copolymerization of 2VN with hexamethylcyclotrisiloxane also results in a block copolymer of P2VN and poly(dimethylsiloxane) (PDMS) contaminated with a significant amount of homo‐PDMS. Poly(2VN‐b‐nBA) (where nBA is n‐butyl acrylate) has also been prepared by the transesterification reaction of the poly(2VN‐b‐tBA) block copolymer. Size exclusion chromatography, Fourier transform infrared, and ¹H NMR measurements indicate that the resulting polymers have the required architecture. The corresponding amphiphilic block copolymer of poly(2VN‐b‐AA) (where AA is acrylic acid) has been synthesized by acidic hydrolysis of the ester group of tert‐butyl from the poly(2VN‐b‐tBA) copolymer. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4387–4397, 2002     

Catalytic Adsorptive Stripping Voltammetry of Cobalt in the Presence of Dimethylglyoxime and Nitrite at In Situ Plated Lead–Copper Film Electrode

A lead‐copper film electrode was proposed for Co(II) determination by catalytic adsorptive stripping voltammetry. The electrode was plated in situ and hence the exchange of a solution after plating step was not required. At optimized conditions the calibration graph for Co(II) was linear from 5×10^?10 to 2×10^?8 mol L^?1 for accumulation time of 15 s. The relative standard deviation for Co(II) determination at concentration 5×10^?9 mol L^?1 was 4.1%. The detection limits for Co(II) were 1.2×10^?10 and 1.0×10^?11 mol L^?1 for an accumulation time of 15 and 180 s, respectively. The method was applied to Co(II) determination in certified reference material and other water samples.     

Isotope‐Coded Affinity Tagging Technique Using Avidin Functional Affinity Electrophoresis: An Alternative to an Avidin Affinity Column

Avidin functional affinity electrophoresis (AFAEP) is substituted for an avidin affinity column (AAC) to capture biotinylated peptides in the Isotope‐Coded Affinity Tagging (ICAT) technique which is a valuable tool in quantitative proteomics. In this new technique, the AFAEP‐captured ICAT‐labeled biotinylated peptides are extracted with the biotin tag intact from the polyacrylamide gel piece with aqueous 95% formamide (pH 8.2) at 65 °C for 20 min, and then detected by a matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometer. Bovine serum albumin (BSA) and the ¹²C‐ and ¹³C‐ICAT reagents are used to test this AFAEP‐ICAT technique. The results show that both AFAEP and AAC methods provide quantitative information of the relative amounts of ¹²C‐ and ¹³C‐ICAT‐labeled biotinylated tryptic peptides of BSA in a sample. Compared with AAC, the AFAEP is cheaper to perform, more stringent in capturing the biotinylated peptides, and capable of simultaneously processing multiple samples.     

A novel blue fluorescent chemosensor for metal cations and protons,based on 1,8‐naphthalimide and its copolymer with styrene

A new blue emitting 2‐allyl‐6‐(2‐dimethylaminoethyloxy)‐benzo[de]isoquinoline‐1,3‐dione, bearing an allylic group has been designed and synthesized. Bulk radical copolymerization has been carried out in order to prepare a fluorescent copolymer, based on styrene. The main photophysical characteristics of the monomeric and polymeric fluorophores have been investigated both in the absence and presence of metal cations and protons. It has been found that the monomeric naphthalimide can be used as a sensor for protons and Zn²⁺, Ni²⁺, Ce³⁺, Cu²⁺, Co²⁺, Ag⁺ cations. The polymeric fluorophore has been shown to be a selective chemosensor for Cu²⁺ cations. Copyright © 2006 John Wiley & Sons, Ltd.     

Design of organic semiconductors: tuning the electronic properties of pi-conjugated oligothiophenes with the 3,4-ethylenedioxythiophene (EDOT) building block

Hybrid oligothiophenes based on a various combinations of thiophene and 3,4-ethylenedioxythiophene (EDOT) groups have been synthesized. UV/Vis absorption spectra show that the number and relative positions of the EDOT groups considerably affect the width of the HOMO-LUMO gap and the rigidity of the conjugated system. Analysis of the crystallographic structure of two hybrid quaterthiophenes confirms that insertion of two adjacent EDOT units in the middle of the molecule leads to a self-rigidification of the conjugated systems by intramolecular SO interactions. Cyclic voltammetry data shows that the first oxidation potential of the oligomers decreases with increasing chain length and increasing number of EDOT groups for a given chain length. Electrochemical studies and theoretical calculations show that the positions of the EDOT units in the conjugated chain control the potential difference (DeltaE(p)) between the first and second oxidation steps. Moving the EDOT groups from the outer to the inner positions of the conjugated system increases DeltaE(p). Theoretical calculations confirm that this phenomenon reflects an increase of the intramolecular coulombic repulsion between positive charges in the dication. A thin-film field-effect transistor was fabricated by vacuum sublimation of a pentamer with alternating thiophene-EDOT structure, and the hole mobility was determined.