Synthesis,spectroscopic studies,and x-ray crystallographic analysis of the organotin carbohydrate: 1,2∶3,4-di-O-isopropylidene-6-O-triphenylstannylmethyl-α-D-galactopyranose

The title organotin carbohydrate, C₃₁H₃₆O₆Sn, has been synthesized and its molecular structure has been determined in solution and in the solid state. NMR, infrared, mass and X-ray crystallographic techniques were used. The chiral molecules crystallize in the monoclinic space group P2₁ withZ=2. The triphenyltin and carbohydrate moieties are linked by a trans methylene-oxygen-methylene arrangement. The pyranosyl ring adopts a twist-boat conformation and the isopropylidene rings adopt different (half-chair and envelope) forms. Solution and solid-state conformations are similar as only three ¹³C shift values are greater than 2ppm; the ¹¹⁹Sn value is 12 ppm.     

Finding normal solutions in piecewise linear programming

Letf: ⁿ (–, ] be a convex polyhedral function. We show that if any standard active set method for quadratic programming (QP) findsx(t)= arg min _x ¦x¦²/2+t f(x) for somet> 0, then its final working set defines a simple equality QP subproblem, whose Lagrange multiplier can be used both for testing ift is large enough forx(t) to coincide with the normal minimizer off, and for increasingt otherwise. The QP subproblem may easily be solved via the matrix factorizations used for findingx(t). This opens up the way for efficient implementations. We also give finite methods for computing the whole trajectory {x(t)} _t 0, minimizingf over an ellipsoid, and choosing penalty parameters inL ₁QP methods for strictly convex QP.This research was supported by the State Committee for Scientific Research under Grant 8S50502206.     

Products and transforms of white-noise functionals (in general setting)

Some sharp results about Weiner and Wick products of whitenoise functionals are obtained. Using the inequality of Wick products we show to what extent scaling transformations, translations, and Sobolev differentiations can be performed on white-noise functionals.This work was supported by the National Natural Science Foundation of China. This paper is an enlargement and revised version of the paper entitled Products and Transforms of White-Noise Functionals (preprint, 1990).     

Criteria for local equilibrium in a system with transport of heat and mass

Nonequilibrium molecular dynamics is used to compute the coupled heat and mass transport in a binary isotope mixture of particles interacting with a Lennard-Jones/spline potential. Two different stationary states are studied, one with a fixed internal energy flux and zero mass flux, and the other with a fixed diffusive mass flux and zero temperature gradient. Computations are made for one overall temperature,T=2, and three overall number densities,n=0.1, 0.2, and 0.4. (All numerical values are given in reduced, Lennard-Jones units unless otherwise stated.) Temperature gradients are up to T=0.09 and weight-fraction gradients up to w ₁=0.007. The flux-force relationships are found to be linear over the entire range. All four transport coefficients (theL-matrix) are determined and the Onsager reciprocal relationship for the off-diagonal coefficients is verified. Four different criteria are used to analyze the concept of local equilibrium in the nonequilibrium system. The local temperature fluctuation is found to be T0.03T and of the same order as the maximum temperature difference across the control volume, except near the cold boundary. A comparison of the local potential energy, enthalpy, and pressure with the corresponding equilibrium values at the same temperature, density, and composition also verifies that local equilibrium is established, except near the boundaries of the system. The velocity contribution to the BoltzmannH-function agrees with its Maxwellian (equilibrium) value within 1%, except near the boundaries, where the deviation is up to 4%. Our results do not support the Eyring-type transport theory involving jumps across energy barriers; we find that its estimates for the heat and mass fluxes are wrong by at least one order of magnitude.     

Residual stress/strain analysis in thin films by X-ray diffraction

Residual stresses are found in the majority of multilayer thin film structures used in modem technology. The measurement and modeling of such stress fields and the elucidation of their effects on structural reliability and device operation have been a “growth area” in the literature, with contributions from authors in various scientific and engineering disciplines.

In this article the measurement of the residual stresses in thin film structures with X-ray diffraction techniques is reviewed and the interpretation of such data and their relationship to mechanical reliability concerns are discussed.     

Direct analysis of thin-layer chromatographic spots of narcotics by means of diffuse reflectance Fourier transform infrared spectroscopy

The technique of diffuse reflectance Fourier transform infrared spectrometry (DRIFT) as an in situ detection method was used for the qualitative and quantitative analysis of drugs (heroin, cocaine and codeine) separated by thin layer chromatography.It was found that at a given interferometer throughput and detector sensitivity the quality of the spectrum depends strongly in the type of the chromatographic thin layer used. A detection limit of approx. 2 g was attained on a microcrystalline cellulose thin layer with a dynamically aligned Bio-Rad Digilab FTS 60A/896 type interferometer and room temperature DTGS detector. A reliable qualitative analysis can be made with as little as 10 to 15 g drug per spot.     

An ab initio molecular orbital study of the grignard reagents CH3MgCl and [CH3MgCl]2: The Schlenk equilibrium

Ab initio molecular orbital calculations are used to study the modified Schlenk equilibrium: 2RMgCl (RMgCl)² MgR₂ + MgCl₂ Mg(Cl₂)MgR₂ with R=H and CH₃. In the absence of any solvents, calculations indicate that the formation of the various possible bridged dimers (RMgCl)₂ is substantially exothermic. However, using dimethylether as a model solvent, we show that the formation of the dimer (Me₂O)(CH₃)Mg(Cl₂)Mg(CH₃)(OMe₂) is exothermic only when entropic effects are included.     

Quantitative determination of chloride by means of flow injection analysis with spectrophotometric detection in the UV/VIS range

Chloride is determined indirectly by Spectrophotometric flow injection analysis. Two systems are compared, both based on the principle of ion exchange of easily detectable anions versus chloride from suitable mercury salts. The first method is based on the exchange of chloride with chloranilate which is detected at 332 nm or at 306 nm in neutral or in acidic medium respectively. In the second case, chloride reacts with Hg(SCN)₂. The liberated thiocyanate forms a strongly coloured complex with Fe(III) in acidic solution with an absorption maximum at 460 nm. Both methods have a detection limit of about 5 mol Cl^–/l (175 ng/ml). In the case of the thiocyanate method, the relative standard deviation is about 2% (7 measurements) in the range of 5 to 150 mol/l and decreases significantly to a value of approximately 0.2% at higher concentrations; for the chloranilate method it is 10% for lower and about 1% for higher concentrations respectively.     

Parallelism across the steps in iterated Runge-Kutta methods for stiff initial value problems

For the parallel integration of stiff initial value problems (IVPs) three main approaches can be distinguished: approaches based on parallelism across the problem, on parallelism across the method and on parallelism across the steps. The first type of parallelism does not require special integration methods can be exploited within any available IVP solver. The methodparallel approach received some attention in the case of Runge-Kutta based methods. For these methods, the required number of processors is roughly half the order of the generating Runge-Kutta method and the speed-up with respect to a good sequential IVP solver is about a factor 2. The third type of parallelism (step-parallelism) can be achieved in any IVP solver based on predictor-corrector iteration. Most step-parallel methods proposed so far employ a large number of processors, but lack the property of robustness, due to a poor convergence behaviour in the iteration process. Hence, the effective speed-up is rather poor. The step-parallel iteraction process proposed in the present paper is less massively parallel, but turns out to be sufficiently robust to solve the four-stage Radau IIA corrector used in our experiments within a few effective iterations per step and to achieve speed-up factors up to 10 with respect to the best sequential codes.The research reported in this paper was partly supported by the Technology Foundation (STW) in the Netherlands.     

Initial data truncation for multivariate output of discrete-event simulations using the Kalman filter

Data truncation is a commonly accepted method of dealing with initialization bias in discrete-event simulation. An algorithm for determining the appropriate initial-data truncation point for multivariate output is proposed. The technique entails averaging across independent replications and estimating a steady-state output model in a state-space framework. A Bayesian technique called Multiple Model Adaptive Estimation (MMAE) is applied to compute a time varying estimate of the output's steady-state mean vector. This MMAE implementation features the use, in paralle, of a bank of Kalman filters. Each filter is constructed under a different assumption concerning the output's steady-state mean vector. One of the filters assumes that the steady-state mean vector is accurately reflected by an estimate, called the assumed steady-state mean vector, taken from the last half of the simulation data. As the filters process the output through the effective transient, this particular filter becomes more likely (in a Bayesian sense) to be the best filter to represent the data and the MMAE mean estimator is influenced increasingly towards the assumed steady-state mean vector. The estimated truncation point is selected when a norm of the MMAE mean vector estimate is within a small tolerance of the assumed steady-state mean vector. A Monte Carlo analysis using data from simulations of open and closed queueing models is used to evaluate the technique. The evaluation criteria include the ability to construct accurate and reliable confidence regions for the mean response vector based on the truncated sequences.