High-temperature TG/DSC/QMS applications in environmental protection

The decomposition reactions of polystyrene, phenolic resin and a protective undercoating material for automobiles which contains PVC were tested using a new type of thermal analysis — mass spectrometry coupling system for measurements to 1500C or 2000C, which is based on the principle of a two-step skimmer orifice system. The results will be presented, with particular emphasis on the detection sensitivity of the new system for the products of decomposition.The capability of this coupling system to detect even heavy metals such as lead and silver in the waste gases from decomposition or after evaporation at high temperatures will also be demonstrated.     

Comparison of sediment pollution in the rivers of the Hungarian Upper Tisza Region using non-destructive analytical techniques

The rivers in the Hungarian Upper Tisza Region are frequently polluted mainly due to mining activities in the catchment area. At the beginning of 2000, two major mining accidents occurred in the Romanian part of the catchment area due to the failure of a tailings dam releasing huge amounts of cyanide and heavy metals to the rivers. Surface sediment as well as water samples were collected at six sites in the years 2000–2003, from the northeast-Hungarian section of the Tisza, Szamos and Túr rivers. The sediment pollution of the rivers was compared based on measurements of bulk material and selected single particles, in order to relate the observed compositions and chemical states of metals to the possible sources and weathering of pollution. Non-destructive X-ray analytical methods were applied in order to obtain different kinds of information from the same samples or particles. In order to identify the pollution sources, their magnitude and fate, complementary analyses were carried out. Heterogeneous particulate samples were analyzed from a large geographical territory and a 4-year time period. Individual particles were analyzed only from the “hot” samples that showed elevated concentrations of heavy metals. Particles that were classified as anthropogenic were finally analyzed to identify trace concentrations and chemical states of heavy metals.     

An Investigation on the Effect of Arsenic Poisoning on Humans,Agriculture, and Fisheries

The purpose of this investigation is to try and understand the degree of arsenic poisoning in the waste water from agricultural chemical factories which release effluents into the waterways in their vicinity. The method of determination is to use the water samples, soil, fish, clams, shell-fish, etc. found in the areas along the canals and aqueducts and those which lie upstream, midstream, and downstream and also the hair samples of people living in the contiguous areas, to check for the levels of arsenic in them by emission spectroscopy. From the analysis during a one year investigation, we find that the level of As in the water creatures of Chungkang Stream and Lu-Er-Men Stream is much higher than in the other water areas of Taiwan such as along beaches and the other rivers; the levels in the hair of the people who live nearby these water courses have a certain degree of correspondence with their eating habits and the quantity of food eaten; however, even those people who eat relatively little have almost 3% As, beyond the 2 mg/kg limit allowed for human beings. We are fully aware of the high level of food contamination on Taiwan, and this fact has been taken into consideration. The effect of As contamination in the soil on agricultural produce does not seem to have any apparent relationship. By the way, the influence of the monthly average rainfall on As contamination in the soil is not obvious.     

Black fungus derived aerogel with double faced properties

Black fungus aerogel (BFA) exhibited interesting double-faced properties. Weexplored the diverse properties of each side of the black fungus in three aspects:water contact angle measurements, liquid selective absorption capacity and air pollutant adsorption abilities.     

巢湖主要入湖河道磷的污染现状

为了解巢湖主要入湖河道中总磷的污染状况,进行了为期三年每月一次的污染调查,十五里河、南淝河、双桥河,污染较重,超出了(GH281-1999)《地表水环境质量标准》的V娄标准。污染主要来自工业废水、生活污水、和农业面源。认为只有开展农业面源污染治理,城市环境综合整治,城市环境综合整治,加强和削减农业化肥的使用量,使得入湖河道水质变好,巢湖的富营养化才能得到控制。     

Analysis of heavy organic pollutants of confined atmospheres

Summary An improved procedure for the determination of the less volatile air pollutants of recycled closed atmospheres by activated carbon-Soxhlet extraction is proposed. After total treatment of desorbate, PAH determination is then accomplished by RP-HPLC using both adsorptiometric and fluorimetric UV detection; phenolic compounds are determined by GC-MS.This technique is suitable for very low levels of PAH and phenolic compounds.     

Nanometer-sized zirconium dioxide microcolumn separation/preconcentration of trace metals and their determination by ICP-OES in environmental and biological samples

A new method is proposed using a microcolumn (20 mm × 2.0 mm) packed with nanometer-sized zirconia as solid-phase extractor for the separation/preconcentration of Mn, Cu, Cr, Zn, Ni and Co prior to their determination by inductively coupled plasma optical emission spectrometer (ICP-OES) in environmental samples. The factors affecting the separation and preconcentration of analytes such as pH, sample flow rate and volume, eluent concentration and volume were determined, interfering ions were studied, and the optimal experimental conditions were established. The adsorption capacity of nanometer-sized ZrO₂ for Mn, Cu, Cr, Zn, Ni and Co was found to be 1.3, 1.3, 1.7, 2.0, 3.9 and 1.5 mg g⁻¹, respectively. The detection limits of the method were 12, 58, 24, 2, 7 and 36 ng L⁻¹, respectively, with a preconcentration factor of 25. The precision of this method was 1.7% (Mn), 2.9% (Cu), 5.9% (Mn), 3.8% (Mn), 6.2% (Mn) and 4.3% (Mn) with 9 determinations of 10 ng mL⁻¹ of target analytes, respectively. The method was successfully applied to the determination of trace metals in lake water, dried fish samples, certified reference materials of human hair and milk, and provided satisfactory results.     

The Influence of Intermolecular Interactions on Second-Order Susceptibilities of Molecular Crystals: Application to the m-Nitroaniline Crystal

The effects of intermolecular interactions on the second-order susceptibilities (⁽²⁾) of molecular crystals are studied by using a semiempirical quantum–chemical method. These effects are discussed on the basis of the super-molecular approach. The influence of the electrostatic interactions between adjacent unit cells on the tensor components of ⁽²⁾ was modeled by using the technique of cumulative atomic multipole moments (CAMMs).     

Spherical molecularly imprinted polymers (SMIPs) via a novel precipitation polymerization in the controlled delivery of sulfasalazine

Spherical molecularly imprinted polymers (SMIPs) have been prepared via a novel precipitation polymerization using sulfasalazine (prodrug used in the diseases of the colon) as template. The sulfasalazine was incorporated into SMIPs and into a spherical non-imprinted polymer (control), and then the release rate of the bioactive agent at different pH values was evaluated. Considerable differences in the release characteristics between imprinted and non-imprinted polymers have been observed. This opens the possibility of the development of drug release systems capable of modulating the release of a specific molecule. Photomicrography of spherical molecularly imprinted polymers (SMIPs).     

Decomposition of Toluene and Acetone in Packed Dielectric Barrier Discharge Reactors

The influences of TiO₂ catalytic material and glass pellet packing on the decomposition efficiency of toluene and acetone in air by dielectric barrier discharge (DBD) reactors were experimentally investigated in this study. The effects of both packing materials on the formation of byproducts such as CO and CO₂ were also evaluated. Experimental results indicate that the introduction of glass materials into the plasma zone of a wire-tube reactor would improve the decomposition efficiency of toluene and acetone compared to a nonpacked reactor. The apparent decomposition rate constant of a glass packed-bed reactor was 4.5–4.8 times greater than that of a nonpacked reactor. The results also indicate that the decomposition rate constant of toluene was approximately 2.6 times higher than that of acetone no matter which type reactor was utilized. The application of TiO₂ coated pellets in DBD reactors will enforce the hydrocarbon byproducts to further be oxidized to CO₂, notwithstanding, it will not significantly improve the performance of the reactors in the decomposition of toluene and acetone, and in the formation of CO. The results show that the best selectivity of CO₂ for acetone decomposition in a TiO₂ coated pellets packed-bed reactor was approximately 40% higher than that in a glass packed-bed reactor.