A Tensile Strain Hardening Test Indicator of Environmental Stress Cracking Resistance

Environmental stress cracking resistance (ESCR) is an important indicator of performance for high density polyethylene (HDPE) in structural and polymer pipe applications. The commonly used test for determining ESCR of HDPE can be time consuming and rather imprecise. A tensile strain hardening test was recently proposed to offer a faster way to characterize ESCR of polyethylene. In this paper, a practical approach is adopted whereby the test is extended to room temperature and shown to relate reliably to the ESCR of HDPE. Several HDPE resins (including pipe‐grade resins) are analyzed at strain rates of 0.5 mm/min and 7 mm/min to compare the effect of strain rate. Comparisons between the conventional ESCR test method and the strain hardening test show that strain hardening can be used to rank ESCR of HDPE in a reliable fashion. In our study the more direct measure of “hardening stiffness” is used to compare resins instead of strain hardening modulus. Because no true stress‐strain measurement is needed, this is a much simpler test method than other methods previously suggested. In addition, the use of the natural drawing ratio (NDR) as ESCR ranking indicator is examined. Results show that NDR can also be employed as a strain rate‐independent indicator of ESCR of HDPE. The test proposed herein is practical, simple and precise, and hence a more reliable indicator of ESCR performance of HDPE.     

电化学生物传感器在环境监测中的应用及发展前景

简要介绍了电化学生物传感器的工作原理,重点论述了电化学生物传感器在环境监测领域的应用及其研究进展,主要包括水环境污染物和大气污染物的监测,以及农药残留的监测等.同时,对电化学生物传感器的发展方向及前景进行了展望.     

Pine Needles (Pinus Sylvestris) as a Bioindicator of Sulphur and Heavy Metal Deposition in the Area Around a Pulp and Paper Mill Complex at Kemi,Northern Finland

Abstract

The determination of sulphur and heavy metals in plants is an integral part of many environmental studies. Pine needles (Pinus Sylvestris) have proved to be suitable air quality indicators for pollutants, especially for sulphur. This study was carried out in the vicinity of Kemi, a town situated on the Gulf of Bothnia in northern Finland. An industrial complex comprising two pulp and paper mills is located in the centre of the area. Scots pine (Pinus Sylvestris) needles were collected from 29 sampling sites. The samples were dried, homogenized and digested with nitric acid. The concentrations of the elements S, Fe, Zn, Ca, V, and Pb were determined by ICP-AES. According to our results pine needles (Pinus sylvestris) appear to be an ideal bioindicator and sampling material for identifying and assessing atmospheric sulphur pollution derived from pulp and paper mills and can complement the information provided by plant mapping studies around pulp and paper mills.     

Environmental Determination of Alkylphenol Polyethoxylate Refractory Residues Using Mass Spectrometric Techniques

Abstract

The use of methane chemical ionisation GC/MS gave satisfactory results when applied to environmental analysis of halogenated octylphenol polyethoxylates residues. In addition the selected ion monitoring GC/MS technique has been successfully applied for simulataneous qualitative and quantitative determination of some refractory metabolites of nonylphenol polyethoxylates in secondary sewage effluent and surface waters.     

Retention profile of Fe,Mn and Cu onto chemically treated polyurethane with carbon disulfide

Dithiocarbamate modified polyurethane foam (DTC-PUF) was synthesized as a new solid-phase extraction sorbent for the preconcentration and determination of Fe(II), Mn(II) and Cu(II) in environmental samples using flame atomic absorption spectrometry. Maximum extraction of the elements was achieved at pH 5–7 and flow rate 3 mL min^?1. Quantitative desorption was achieved by 10 mL from 1.0 mol L^?1 HCl solution. The capacity of the sorbent was 149.2 ± 0.5, 237.5 ± 0.2, 200.2 ± 0.1 μg g^?1 and the limit of detection was of 0.015, 0.015 and 0.012 μg mL^?1for Fe(II), Mn(II) and Cu(II), respectively. A preconcentration factor of 100 was obtained for all elements. The developed method was successfully applied to the determination of the tested elements in water (tap and lake) and plant (spinach and parsley leaves) samples and showed good recovery values from 98 to 111% with corresponding RSD values ranged from 0.6 to 8.6%.     

Application of a new focused microwave technology with species-specific isotope dilution analysis for the quantitative extraction of organometallic contaminants in solid environmental matrices

A new self-tuning single-mode-focused microwave technology has been evaluated in this work to perform the quantitative routine extraction of organometallic species from solid matrices of environmental interest. Species-specific isotope dilution analysis has been employed to better investigate the real influence of the microwave-assisted extractions on the final results. The advantages of such methodology in comparison with other established microwave units for the routine speciation analysis of organomercury and organotin compounds are discussed (such as the capability of using disposable glass vials, a self-tuning mode to provide an accurate control of the temperature and pressure inside of the vials, and the possibility of performing automated sequence of extractions with low sample size). The results obtained in this work demonstrated that such technology provides a fast and reliable quantitative extraction of the organometallic species in a wide range of extraction conditions even when the multi-elemental (Sn and Hg) species-specific determination is carried out.     

新型污染物的环境质谱技术研究进展

随着科学技术的飞速发展,质谱检测及其联用技术方法正以前所未有的速度、广度和深度全面渗透到环境分析化学中,其在环境监测中的使用已经或正在日常化.近年来,一些高分辨质谱及其与色谱等的联用技术在目标污染物和非目标污染物的同时甄别鉴定和分析中发挥了重要作用,其对于阐明污染物在环境的归趋具有重要意义.本文对质谱技术及其与气相色谱和液相色谱的联用技术在污染物尤其是新型污染物分析中的进展进行了总结,并对高分辨质谱技术的环境应用研究给于关注,对环境质谱技术的发展方向进行了展望.     

基于共价有机骨架材料的磁固相萃取-超高效液相色谱-串联质谱法测定水中4种杀菌剂

杀菌剂在环境中长期富集后会引起土壤和植物病害,并能借助雨水或灌溉渗透到深层土壤和地下水中,威胁水体环境和人体健康。因此针对水中杀菌剂开发简单快速、高效灵敏的分析方法至关重要。该研究通过原位合成法制备了磁性共价有机骨架材料Fe₃O₄@TpBD,将其作为萃取吸附剂,富集环境水体中苯并咪唑杀菌剂(噻菌灵、麦穗宁、多菌灵)和有机硫杀菌剂(稻瘟灵)。利用Fe₃O₄@TpBD与杀菌剂之间的π-π共轭、氢键和静电作用进行吸附,结合超高效液相色谱-串联质谱法(UHPLC-MS/MS)进行检测,建立了测定水中4种痕量杀菌剂的分析方法。通过透射电子显微镜、X射线衍射及傅里叶变换红外光谱等方式对Fe₃O₄@TpBD进行表征,以证明材料的成功合成。对萃取条件进行一系列的优化(Fe₃O₄@TpBD的磁性比例及用量、水样pH、吸附时间、洗脱液的种类及体积、洗脱时间、NaCl含量),确定了最佳萃取条件。4种杀菌剂在3~1200 ng/L的范围内线性关系良好,线性相关系数均大于0.998,方法的检出限和定量限分别为0.06~0.28 ng/L和0.20~0.92 ng/L。在15、150和600 ng/L 3个加标水平下进行加标回收试验,日内和日间精密度分别为2.8%~10.0%和4.4%~15.7%。将该方法用于实际水样的检测,4种杀菌剂的加标回收率为77.1%~119.1%,在水库水中检测出多菌灵,含量为27.5 ng/L。该方法灵敏度高,准确度和精密度良好,操作简单,耗时短。     

加速溶剂提取-同位素稀释-高分辨气相色谱-高分辨质谱法测定生物样品中82种多氯联苯

我国水产品中多氯联苯(PCBs)的检测方法,主要以6种指示性PCBs和12种二噁英类共平面PCBs为主,仅涵盖有限的PCBs。为更全面地获得生物体中PCBs的浓度水平,深入探讨PCBs在生物体内的代谢和富集特征,进而准确评价PCBs对人类的暴露水平及风险,以鱼和贝类作为生物样品代表,建立了加速溶剂提取-同位素稀释-高分辨气相色谱-高分辨质谱(ASE-ID-HRGC-HRMS)测定生物样品中82种PCBs的方法。比较了振荡提取和加速溶剂提取两种提取方式的回收率和重复性,最终采用正己烷-二氯甲烷(1∶1, v/v)对PCBs进行加速溶剂提取。考察了各流分淋洗液对PCBs的回收率,确定了样品提取液经8 g 44%酸性硅胶层析柱(内径15 mm), 90 mL正己烷洗脱的净化方式。样品提取液净化浓缩后进行HRGC-HRMS分析,色谱柱采用DB-5MS超低流失石英毛细管柱(60 m×0.25 mm×0.25 μm)。通过优化后的升温程序对化合物进行分离,以保留时间和两个特征离子精准定性,采用同位素内标法定量。结果表明,在0.1~200 μg/L范围内,平均相对响应因子(RRF)的相对标准偏差值(RSD, n=7)均≤20%,相关系数(r²)>0.99。生物样品中PCBs的方法检出限为0.02~3 pg/g;鱼类中PCBs平均加标回收率为71.3%~141%, RSD(n=7)为2.1%~14%;贝类中PCBs平均加标回收率为76.9%~143%, RSD为1.4%~11%。该方法灵敏、准确、可靠,可以更加全面具体地分析鱼和贝类等水产品受PCBs的污染情况,为国内外开展生物监测提供有效的技术支持,从而服务于相关生态环境管理及履行《斯德哥尔摩公约》。     

Single-drop microextraction technique for the determination of antibiotics in environmental water

Growing concerns related to antibiotic residues in environmental water have encouraged the development of rapid, sensitive, and accurate analytical methods. Single-drop microextraction has been recognized as an efficient approach for the isolation and preconcentration of several analytes from a complex sample matrix. Thus, single-drop microextraction techniques are cost-effective and less harmful to the environment, subscribing to green analytical chemistry principles. Herein, an overview and the current advances in single-drop microextraction for the determination of antibiotics in environmental water are presented were included. In particular, two main approaches used to perform single-drop microextraction (direct immersion-single-drop microextraction and headspace-single-drop microextraction) are reviewed. Furthermore, the impressive analytical features and future perspectives of single-drop microextraction are discussed in this review.