Study on the denoising method for the electromagnetic ultrasonic echoes from multiple interfaces

The electromagnetic ultrasound is used in the detection of interfaces of the adhesive multilayer structures to solve the unstable coupling problem in ultrasonic testing by traditional piezoelectric transducers. Based on the analysis of the transforming mechanism of electromag-netic ultrasound energy and the resultant dead zone from mutual inductance of the transducer, the wavelet filtering by soft-thresholding and adaptive noise canceling methods are used simul-taneously to the detected electromagnetic ultrasonic signals to overcome the drawbacks of the low signal to noise ratio （SNR） and the wide intrinsic dead zone of the transducer. Processed results in the interface detection of a three layered adhesive sample of steel and rubber materials demonstrate that the wavelet filtering enhances the SNR about 12dB while the adaptive noise canceling narrows the dead zone effectively.     

光锥导光装置耦合效率分析与测试

介绍了光锥导光装置的优势,分析了影响光锥导光装置耦合效率的主要因素,得出了影响光锥导光装置耦合效率的理论模型误差曲线。以光锥端面反射损耗及光纤辐射损耗为主要误差源,测试了光锥导光装置的耦合效率及误差对耦合效率的影响;采用分光比标定的方法测量导光装置的耦合效率,消除了由于激光器输出能量变化给试验中脉冲能量测量环节带来的影响;根据试验测量数据,拟合出误差对耦合效率的影响曲线,通过与理论误差曲线进行对比,验证了理论模型的正确性,同时测得该耦合装置的耦合效率为70．26％。在激光束的入射角度误差〈5°,且在光纤耐受弯折允许范围内甩动光纤的情况下,总误差对耦合效率的影响〈10％,满足实际工程误差的允许范围。该耦合装置已经应用到实际工程中。     

小麦超弱延迟发光测试系统

应用一种新型高灵敏度光电倍增管作为传感器,设计一套用于检测小麦超弱发光的光子计数测量系统,实现对储藏小麦超弱发光的定量测量.适当安排LED阵列分布,设计适合延迟发光需要的照明系统,通过对白光LED光源辐射等效单光子能量和流明效率的计算,建立起光照度与光子数强度之间的联系,实现了光源照射强度与样品延迟发光强度之间的定量比较.对不同光照强度下小麦样品延迟发光的测试和双曲函数拟合,探讨了小麦超弱延迟发光双曲函数拟合参量的变化规律;发现不同照射强度下存在不同的饱和照射时间;小麦超弱延迟发光强度曲线符合双曲衰减规律,超弱延迟发光持续时间达数小时.通过对光照时间和数据采集时间的精确控制,以及在拟合函数中设置延迟时间参量因子,实现了延迟发光测试数据对应时间点的精确标定.     

气源MBE外延自组装GeSi量子点光致荧光研究

利用气源分子束外延设备（MBE）制作了GeSi自组装量子点样品。利用原子力显微镜（AFM）和光致荧光（PL）光谱研究了量子点的形貌和光学性质。气源MBE在较低温度下生长的量子点材料具有较高的量子点覆盖度。200K以下载流子以局域激子形式束缚在量子点中,激子束缚能约为17meV。升温至200K,载流子的输运过程发生变化。对量子点PL积分强度与温度关系曲线进行拟合得到量子点中空穴跃迁至浸润层的热激活能为129meV。     

考虑单元劈裂的流-固耦合连续-非连续方法及定向水力压裂模拟

为了更真实地模拟水力压裂过程中的岩石变形、裂缝扩展及流体流动,在自主开发的拉格朗日元与离散元耦合的连续-非连续方法的基础上,发展了一种流-固耦合方法。在该方法中,裂缝可沿四边形单元对角线和单元边界扩展,流体流动满足立方定律。通过与单一裂缝非稳态渗流模型及KGD模型的理论解进行对比,验证了该方法的正确性。由定向射孔水力压裂的模拟结果可以发现,(1)距离射孔越远,流体压力越小;随着时间的增加,裂缝中流体压力降低。(2)随着射孔角度的增加,裂缝起裂和扩展过程中的流体压力及转向距离增加;随着x方向水平应力的增加,裂缝起裂和扩展过程中的流体压力增加;两个方向水平应力之差越大,裂缝转向距离越小。(3)随着时间的增加,裂缝区段数目的增速变慢,这与裂缝体积增加变快有关。     

雷诺应力对平均和脉动压力影响的数值模拟

采用增加雷诺应力边界条件方法考察了雷诺应力对流场的影响。当雷诺应力边界条件存在时,流场内平均和脉动压力的变化体现了雷诺应力的影响。本文首先在没有雷诺应力边界条件和有雷诺应力边界条件的情况下得到TTU低矮建筑标准模型表面的平均压力系数,结果表明:考虑雷诺应力可使建筑物表面的平均压力系数的绝对值增大。本文还利用Selvam提出的脉动压力系数数学模型,计算了TTU模型表面的脉动压力系数,并对计算结果进行了分析。     

The effective ionization coefficients and electron drift velocities in gas mixtures of CF3I with N2 and CO2 obtained from Boltzmann equation analysis

The electron swarm parameters including the density-normalized effective ionization coefficients(α-η)/N and the electron drift velocities V e are calculated for a gas mixture of CF3I with N2 and CO2 by solving the Boltzmann equation in the condition of a steady-state Townsend(SST) experiment.The overall density-reduced electric field strength is from 100 Td to 1000 Td(1 Td = 10-17V·cm2),while the CF3I content k in the gas mixture can be varied over the range from 0% to 100%.From the variation of(αη)/N with the CF3I mixture ratio k,the limiting field strength(E/N) lim for each CF3I concentration is derived.It is found that for the mixtures with 70% CF3I,the values of(E/N) lim are essentially the same as that for pure SF 6.Additionally,the global warming potential(GWP) and the liquefaction temperature of the gas mixtures are also taken into account to evaluate the possibility of application in the gas insulation of power equipment.     

SINGLE AND DOUBLE EDGE INTERFACE CRACK SOLUTIONS FOR ARBITRARY FORMS OF MATERIAL COMBINATION

In this paper interfacial edge crack problems are considered by the application of the finite element method. The stress intensity factors are accurately determined from the ratio of crack-tip-stress value between the target given unknown and reference problems. The reference problem is chosen to produce the singular stress fields proportional to those of the given unknown problem. Here the original proportional method is improved through utilizing very refined meshes and post-processing technique of linear extrapolation. The results for a double-edge interface crack in a bonded strip are newly obtained and compared with those of a single-edge interface crack for different forms of combination of material. It is found that the stress intensity factors should be compared in the three different zones of relative crack lengths. Different from the case of a cracked homogeneous strip, the results for the double edge interface cracks are found to possibly be bigger than those for a single edge interface crack under the same relative crack length.     

The efect of the couple stress parameter and Prandtl number on the transient natural convection flow over a vertical cylinder

An analysis is performed to study transient free convective boundary layer flow of a couple stress fluid over a vertical cylinder, in the absence of body couples. The solution of the time-dependent non-linear and coupled governing equations is carried out with the aid of an unconditionally stable Crank–Nicolson type of numerical scheme. Numerical results for the steady-state velocity, temperature as well as the time histories of the skin-friction coefcient and Nusselt number are presented graphically and discussed. It is seen that for all flow variables as the couple stress control parameter, Co, is amplified, the time required for reaching the temporal maximum increases but the steady-state decreases.     

Influence of the surface morphology on the melting of polymer crystals. I. Loops of random length and adjacent reentry

A polymer crystal with a noncrystalline surface layer formed by chain loops of different lengths is considered. It is assumed that the length of each loop can be changed by longitudinal diffusion of the molecule through the crystal lattice. From the condition that the free energy of the system is minimum, the loop length distribution and the average loop length as function of temperature are calculated. In contrast to the results for loops of equal length, for the present model, a substantial thickness of the noncrystalline surface layer and a broad melting range is obtained also for the case of adjacent reentry. In order to get this result one has to take into account that even an “ideal fold” consists of at least four rigidly arranged CH2 groups in energetically unfavored conformation.