太赫兹量子级联激光器光束特性分析

用有限元法计算太赫兹量子级联激光器激光模式的阈值增益.结果表明:接触层厚度和掺杂浓度对阈值增益的影响远远大于波导宽度和激射波长;接触层厚度较小(大)和掺杂浓度较低(高)时,TM₁(TM₀)模的阈值增益较小.在此基础上,用矢量衍射理论分析岀射光束的远场特性,得到光束的远场光斑基本是椭圆;x方向的远场散射角随波导宽度或激射波长的增加分别线性减小或增加,尽管对应的接触层厚度和掺杂浓度不同,但TM₀和TM₁模x方向的远场散射角相同;另外,还得到y方向远场散射角不受波导宽度或少受激射波长的影响.在阈值增益和光束质量方面,TM₁模都优于TM₀模.     

Two localized CO2 laser treatment methods for mitigation of UV damage growth in fused silica

Two methods：high-power,short-time,single-shot irradiation（Method A） and low-power,long-time,multi-shot irradiation（Method B） are investigated to mitigate the UV damage growth in fused silica by using a 10.6-μm CO2 laser.To verify the mitigation effect of the two methods,the laser induced damage thresholds（LIDTs） of the mitigated sites are tested with a 355-nm,6.4-ns Nd：YAG laser,and the light modulation of the mitigation sites are tested with a 351-nm continuous Nd：YLF laser.The mitigated damaged sites treated with the two methods have almost the same LIDTs,which can recover to the level of pristine material.Compared with Method A,Method B produces mitigated sites with low crater depth and weak light modulation.In addition,there is no raised rim or re-deposited debris formed around the crater edge for Method B.Theoretical calculation is utilized to evaluate the central temperature of the CO2 laser beam irradiated zone and the radius of the crater.It is indicated that the calculated results are consistent with the experimental results.     

激光钝化对熔石英修复后损伤性能影响的实验研究

采用10.6 μupm 的 CO₂激光, 对单次激光脉冲辐照修复熔石英存在的烧蚀采用大光斑钝化去除. 经过辐照修复的区域置于前表面测试初始损伤阈值, 结果表明调制造成的损伤得到了一定程度的抑制; 辐照区域置于后表面修复后 熔石英的初始损伤阈值超过了基底的初始损伤阈值. 实验观察到了应力分布外扩, 同时明显减弱. 对损伤增长的测试说明, 经过激光熔融辐照后的损伤点, 当应力释放以后, 损伤扩展初期表现出指数增长趋势, 后期随着辐照次数的增加, 损伤增长不再明显, 并且趋于恒定值.     

短波段光学减反膜的溶胶-凝胶法制备及性能分析

 随着大型激光器的发展，对短波段减反膜的要求日益提高，其中钕玻璃激光三倍频（355nm）的减反射成为新的技术要点。采用溶胶-凝胶工艺合成SiO₂溶胶，采用提拉镀膜法制备纳米多孔SiO₂薄膜，薄膜厚度为75nm，折射率控制在1.22，镀制在石英基底上的薄膜其355nm波长的反射率仅为0.2%。通过氨处理工艺和薄膜的表面修饰，薄膜的抗磨擦性能和疏水性能大大提高，薄膜经过蘸有灰尘、乙醇的棉花球擦洗20次和50次后，透射率最大值仅分别降低0.13% 和 0.39%，与水珠的接触角达到110°。     

On a first-passage problem for a cumulative process with exponential decay

A first-passage problem for a cumulative process is investigated. The cumulative process is assumed to be generated by a Poisson process, and the amplitude generated by an event is assumed to decay exponentially. An integral equation for the probability density of the first-passage time until the total amplitude exceeds a pre-specified threshold level is derived. The Laplace transform of the probability density of the first-passage time is obtained explicity when each amplitude generated by an event is distributed exponentially. The mean first-passage times are given in a closed form and plotted versus the threshold level.     

A comparison of local search methods for flow shop scheduling

Local search techniques are widely used to obtain approximate solutions to a variety of combinatorial optimization problems. Two important categories of local search methods are neighbourhood search and genetic algorithms. Commonly used neighbourhood search methods include descent, threshold accepting, simulated annealing and tabu search. In this paper, we present a computational study that compares these four neighbourhood search methods, a genetic algorithm, and a hybrid method in which descent is incorporated into the genetic algorithm. The performance of these six local search methods is evaluated on the problem of scheduling jobs in a permutation flow shop to minimize the total weighted completion time. Based on the results of extensive computational tests, simulated annealing is found to generate better quality solutions than the other neighborhood search methods. However, the results also indicate that the hybrid genetic descent algorithm is superior to simulated annealing.     

强光场中原子的电离速率

以静态场隧道电离为基础,在准静态近似的条件下,对描述强光场中原子及其各阶离子电离的电离速率进行了较为系统的总结,纠正了早期对隧道电离的电离速率公式进行讨论并且后来的计算中被广泛引用的文献「１０」中公式的错误,地部分稀有气体原子及其各了子在线偏振、圆偏振强光场中的了速度及相应的阈值光强进行了比较。     

LINEAR AND NONLINEAR SEMICLASSICAL THEORY OF WHISPERING-GALLERY-MODE MICROSPHERE LASER

A complete whispering-gallery-mode microsphere laser theory is developed, which combines usual laser semiclassical theory with Lorenz-Mie theory. The linear and nonlinear problems of the microsphere lasing are dealt with in the universal mode picture. The threshold condition, average amplitude of the steady state and frequency effect are obtained. A comparison between the theory and experiments is also made.     

基于小波变换的便携式X射线荧光光谱仪检测模型的建立与改进

应用便携式X射线荧光光谱仪对土壤中Cr,Cu,Zn,As,Pb等重金属含量进行检测, 每个样品扫描检测3次,利用小波阈值滤噪的方法对所测谱线进行光滑去噪处理后, 根据土壤重金属的标准值和相应的计数率(取三次处理后检测谱线的平均值)建立各重金属的标准曲线。运用小波阈值滤噪方法时, 为确定最佳的小波基和小波分解层数, 以信噪比(SNR),均方根误差(MSE)和信息熵(H)作为评估指标评价降噪效果。为验证仪器的稳定性, 根据土壤样品中重金属浓度的不同挑选部分样品并同时选用H₃BO₃(空白对照)进行重测。结果表明: 运用小波变换方法时,选取coif3小波基对谱线进行三层分解, 取得了最佳的去噪效果; 建立好模型后,仪器的决定系数R2范围是0.990~0.996, 表明在0~1 500 mg·kg-1范围内, 土壤样品中各重金属元素含量与X射线荧光光谱特征峰强度之间的线性关系良好; 经过重复检测和计算得知仪器的检出限均低于国家一级土壤标准。将小波变换的方法实际运用到X射线荧光光谱仪检测模型的建立与改进中,有效的提高了模型的准确性,同时经验证,仪器具有良好的精密度,可运用于实际土壤重金属污染的现场快速筛查。     

高压直流断路器测控装置的设计与试验分析

直流输(配)电是目前电网发展的趋势,而高压直流断路器的研发是影响其发展的关键技术之一。测量与控制装置的研究是高压直流断路器的研发要点。采用高压电力电子器件,DSP+FPGA相结合的控制方式,对其测控装置进行研究分析,提出了区间阈值的控制方法及相应的控制时序,从高压直流输电、能源多样化的发展需求入手,将机械开关和固态开光相结合,设计了一套混合式高压直流断路器样机。通过对样机进行合分闸试验及故障分闸试验,证明了所研制的高压直流断路器样机具有分闸动作快,限弧能力强,动作一致性好等优点。