一致可逆性质与(ω)性质的判定

利用算子的一致可逆性质,定义了一个新的谱集,分别给出了有界线性算子满足(ω)性质的充分条件和必要条件,并在此基础上得到算子与其算子演算满足(ω)性质的判定条件。     

Consistent Initialization for Nonlinear Index-2 Differential–Algebraic Equation: Large Sparse Systems in MATLAB

An important component of any initial-value solver for higher-index differential–algebraic equations consists in the computation of consistent initial values. In a recent paper [5], an algorithm is proposed which is applicable to a very general class of index-2 systems. Unfortunately, the computational expense is rather high. We present a modification of this approach, which gives rise to a MATLAB implementation capable of handling systems of moderate dimension (several thousands of unknowns). The algorithm is illustrated by examples.     

Consistent values and the core in continuum market games with two types of players

The consistent value is an extension of the Shapley value to the class of games with non-transferable utility.? In this paper, the consistent value will be characterized for market games with a continuum of players of two types. We will show that for such games the consistent value need not belong to the core, and provide conditions under which there is equivalence between the two concepts. Received: October 1998 RID="*" ID="*"  This thesis was completed under the supervision of Professor Sergiu Hart, The Center for Rationality and Interactive Decision Theory, Department of Mathematics, Department of Economics, The Hebrew University of Jerusalem. I would like to thank Professor Hart for introducing me to this area of research, for his help and guidance, and, especially, for all his patience.? I would also like to thank Michael Borns for improving the style, and an anonymous referee for helpful comments.     

动态硫化EPDM／PP共混体系中PP相的结晶度及晶体结构的研究

研究了动态硫化ＥＰＤＭ／ＰＰ共混物中ＰＰ相的结晶度及晶体结构,同时讨论了制备工艺条件以共混物中ＰＰ相的结晶度和晶体结构的影响。结果表明：在动态硫化ＥＰＤＭ／ＰＰ共混物中,硫化的ＥＰＤＭ的分子键没有穿入ＰＰ的晶区,ＰＰ的结晶度随ＥＰＤＭ含量的增加而下降。提高共混温度,加入软化剂或碳黑均使共混物中ＰＰ的结晶度降低,共混时间１５ｍｉｎ时,共混物中ＰＰ相的结晶度最低,但ＰＰ的晶格不受制备工艺条件的影响。     

3-X-2(1H)-吡啶酮互变异构体系的理论计算

２（１Ｈ）－吡啶酮类化合物常呈现出诱人的生物活性［１,２］．由于酮式和烯醇式结构具有互变异构化性质,因此确定其互变异构平衡体系中的优势结构及研究取代基对平衡体系的影响,对阐明该类化合物的生物活性及进行构效关系的研究有着重要的意义．当其３－位含有可与２－位羰基或２－位羟基形成分子内氢键的基团时,势必对互变异构平衡产生影响．基于该类化合物的互变异构平衡有着强烈的溶剂效应［３］,本文对３－Ｘ－２（１Ｈ）－吡啶酮（Ｘ＝ＮＯ２,ＮＨ２,ＣＯＯＨ）及其烯醇式互变异构体分别在气相和溶液中进行了理论计算,考察了…     

Improved efficiency of focal point conformational analysis with truncated correlation consistent basis sets

It has been suggested that the computational cost of correlated ab initio calculations could be reduced efficiently by using truncated basis sets on hydrogen atoms (Mintz et al., J Chem Phys 2004, 121, 5629). We now explore this proposal in the context of conformational analysis of small molecules, such as hydrogen peroxide, dimethyl ether, ethyl methyl ether, formic acid, methyl formate, and several small alcohols. It is found that truncated correlation consistent basis sets that lack certain higher angular momentum functions on hydrogen atoms offer accuracy similar to traditional Dunning's basis sets for conformational analysis. Combination of such basis sets with the basis set extrapolation technique to estimate Hartree-Fock and M?ller-Plesset second order energies provides composite extrapolation model chemistries that are significantly more accurate and faster than analogous single point calculations with traditional correlation consistent basis sets. Root mean square errors of best composite extrapolation model chemistries on the used set of molecules are within 0.03 kcal/mol of traditional focal point conformational energies. The applicability of composite extrapolation methods is illustrated by performing conformational analysis of tert-butanol and cyclohexanol. For comparison, conformational energies calculated with popular molecular mechanics force fields are also given.     

Gaussian basis sets for molecular applications

The choice of basis set in quantum chemical calculations can have a huge impact on the quality of the results, especially for correlated ab initio methods. This article provides an overview of the development of Gaussian basis sets for molecular calculations, with a focus on four popular families of modern atom‐centered, energy‐optimized bases: atomic natural orbital, correlation consistent, polarization consistent, and def2. The terminology used for describing basis sets is briefly covered, along with an overview of the auxiliary basis sets used in a number of integral approximation techniques and an outlook on possible future directions of basis set design. © 2012 Wiley Periodicals, Inc.     

Compatibility of correlation‐consistent basis sets with a hybrid Hartree–Fock/density functional method

The present study examines the feasibility of combining the correlation‐consistent basis sets developed by Dunning and coworkers with the hybrid Hartree–Fock/density functional method B3LYP. Furthermore, extrapolation to the complete basis set (CBS) limit minimizes errors due to the presence of an incomplete basis set and can act as a rigorous test of the limitations of the B3LYP method. Equilibrium geometries, energies, and harmonic vibrational frequencies were determined for a series of well‐studied, yet computationally challenging, small inorganics and their respective ions. The results were then extrapolated to the CBS limit, where applicable, and compared to experiment. It was found that a union between the hybrid Hartree–Fock/density functional B3LYP method and Dunning's augmented correlation‐consistent basis sets gave results that were comparable to molecular orbital methods that explicitly account for electron correlation. Furthermore, the minimum basis set necessary to attain reasonable results for the systems studied was aug‐cc‐pVTZ. Upgrading to the aug‐cc‐pVQZ level and subsequent extrapolation to the CBS limit further improved the overall agreement with the experiment. ©1999 John Wiley & Sons, Inc. J Comput Chem 20: 207–216, 1999     

Consensus bond-charge increments fitted to electrostatic potential or field of many compounds: Application to MMFF94 training set

Bond-charge increments (BCIs) are additive parameters used to assign atomic charges for the MMFF force field. BCI parameters are classified parsimoniously according to two atom types and the bond order. We show how BCIs may be fitted rapidly by linear least squares to the calculated ab initio electrostatic potential (ESP) or to the electrostatic field. When applied simultaneously to a set of compounds or conformations, the method yields consensus values of the BCIs. The method can also derive conventional “ESP-fit” atomic charges with improved numerical stability. The method may be generalized to determine atom multipoles, multicenter charge templates, or electronegativities, but not polarizability or hardness. We determine 65 potential-derived (PD) BCI parameters, which are classified as in MMFF, by fitting the 6-31G* ESP or the electrostatic field of the 45 compounds in the original MMFF94 training set. We compare the consensus BCIs with classified BCIs that were fit to each molecule individually and with “unique-bond” BCIs (ESP-derived atom charges). Consensus BCIs give a satisfactory representation for about half of the structures and are robust to the adjustment of the alkyl CH bond increment to the zero value employed in MMFF94. We highlight problems at three levels: Point approximation: the potential near lone pairs on sulfur and to some extent nitrogen cannot be represented just by atom charges. Bond classification: BCIs classified according to MMFF atom types cannot represent all delocalized electronic effects. The problem is especially severe for bonds between atoms of equivalent MMFF type, whose BCI must be taken as zero. Consensus: discrepancies that occur in forming the consensus across the training set indicate the need for a more detailed classification of BCIs. Contradictions are seen (e.g., between acetic acid and acetone and between guanidine and formaldehydeimine). We then test the three sets of PD-BCIs in energy minimizations of hydrogen-bonded dimers. Unique-bond BCIs used with the MMFF buffered 14–7 potential reproduce unscaled quantum chemical dimer interaction energies within 0.9 kcal/mol root mean square (or 0.5, omitting two N-oxides). These energies are on average 0.7 (or 0.5) kcal/mol too weak to reproduce the scaled quantum mechanical (SQM) results that are a benchmark for MMFF parameterization. Consensus BCIs tend to weaken the dimer energy by a further 0.4–0.6 kcal/mol. Thus, consensus PD-BCIs can serve as a starting point for MMFF parameterization, but they require both systematic and individual adjustments. Used with a “harder” AMBER-like Lennard–Jones potential, unique-bond PD-BCIs without systematic adjustment give dimer energies in fairly good agreement with SQM. ©1999 John Wiley & Sons, Inc. J Comput Chem 20: 1495–1516, 1999     

基于残差平方和的线性模型选择简单方法及其相合性研究

本文研究了回归分析理论中的自变量选择的重要问题,利用线性回归模型自变量增减的残差平方和理论,获得了一种选择自变量的准则,该准则的分析表明,它计算简单,而且在一定的条件下具有强相合性.