FREE VIBRATION OF ANISOTROPIC RECTANGULAR PLATES BY GENERAL ANALYTICAL METHOD

According to the differential equation for transverse displacement function of anisotropic rectangular thin plates in free vibration, a general analytical solution is established. This general solution, composed of the composite solutions of trigonometric function and hyperbolic function, can satisfy the problem of arbitrary boundary conditions along four edges. The algebraic polynomial with double sine series solutions can also satisfy the problem of boundary conditions at four corners. Consequently, this general solution can be used to solve the vibration problem of anisotropic rectangular plates with arbitrary boundaries accurately. The integral constants can be determined by boundary conditions of four edges and four corners. Each natural frequency and vibration mode can be solved by the determinate of coefficient matrix from the homogeneous linear algebraic equations equal to zero. For example, a composite symmetric angle ply laminated plate with four edges clamped has been calculated and discussed.     

Scaled-boundary method in electroelasticity of thin plates

The paper discusses the scaled-boundary method as applied to electroelastic problems. As an example, the stress-intensity factor is calculated for a thin rectangular piezoelectric plate with an edge crack __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 7, pp. 124–134, July 2006.     

AN EXACT METHOD OF BENDING OF ELASTIC THIN PLATES WITH ARBITRARY SHAPE

ＡＮ　ＥＸＡＣＴ　ＭＥＴＨＯＤ　ＯＦ　ＢＥＮＤＩＮＧ　ＯＦ　ＥＬＡＳＴＩＣ　ＴＨＩＮ　ＰＬＡＴＥＳ　ＷＩＴＨ　ＡＲＢＩＴＲＡＲＹ　ＳＨＡＰＥＺｈｏｕＤｉｎｇ（周叮）（ＲｅｃｅｉｖｅｄＡｐｒｉｌ１０，１９９５，ＲｅｖｉｓｅｄＡｐｒｉｌ２６．１９９６．Ｃ...     

Effects of oxidation and surface roughness on contact angle

Contact angle is known to be a parameter that effects boiling. This study was undertaken to measure contact angle of high and low surface tension fluids on copper and aluminum surfaces.Data were taken for polished, oxidized, and rough surfaces. A simple, yet fairly accurate method of measuring the static equilibrium contact angle of a solid/liquid interface is presented. The principles of a line light source and tilting plate were modified and then combined in the design of this apparatus. The angles obtained and their variation with the solid surface properties were in good agreement with previously published data. The contact angle of distilled water o of the organic fluids and refrigerants tested were in the range of 2–5°. Roughness and oxidation reduce the contact angle. If the depth of the roughness is less than 0.5 μm contact angle. The apparatus is fairly simple in construction, is inexpensive, and has good reproductibity. The measured angles were then compared to those measured with the sessile drop method.     

A numerical exploration of secondary separation in starting flow around a flat plate by the discrete vortex model

In the present work, a further numerical simulation of the starting flow around a flat plate normal to the direction of motion in a uniform fluid has been made by means of the discrete vortex method. The secondary separation occurring at rear surface of the plate is explored, and predicted approximately using Thwait's method. The calculated results show that in the early stages of the flow secondary separation does occur. The evolution of flow field, the vortex growing process and the characteristics of secondary vortices have been described. The time dependent drag coefficients, the vorticity shed from the edges and rear surface, and the separation positions are calculated as well as the distributions of velocity and pressure on the plate. In the case of flow normal to the plate, the calculated secondary vortices are weak. Their existence will change the local velocity distributions and affect pressure distributions. However, the effect on drag coefficient is negligible.     

广义Maxwell黏弹性流体在两平板间的非定常流动

将分数阶微积分运算引入Maxwell黏弹性流体的本构方程，研究了黏弹性流体在两平板问的非定常流动．对于广义Maxwell黏弹性流体的分数阶导数模型，导出了对时间具有分数阶导数的特殊运动方程，利用分数阶微积分的Laplace变换理论，得到了流动的解析解．     

Large amplitude free flexural vibrations of laminated composite skew plates

Here, the large amplitude free flexural vibration behaviors of thin laminated composite skew plates are investigated using finite element approach. The formulation includes the effects of shear deformation, in-plane and rotary inertia. The geometric non-linearity based on von Karman's assumptions is introduced. The non-linear governing equations obtained employing Lagrange's equations of motion are solved using the direct iteration technique. The variation of non-linear frequency ratios with amplitudes is brought out considering different parameters such as skew angle, number of layers, fiber orientation, boundary condition and aspect ratio. The influence of higher vibration modes on the non-linear dynamic behavior of laminated skew plates is also highlighted. The present study reveals the redistribution of vibrating mode shape at certain amplitude of vibration depending on geometric and lamination parameters of the plate. Also, the degree of hardening behavior increases with the skew angle and its rate of change depends on the level of amplitude of vibration.     

正交各向异性压磁电弹性矩形板的稳定问题

从压磁电弹性力学的三维平衡方程和本构关系出发,推导得到了正交各向异性压磁电弹性矩形板稳定问题的状态方程。求解状态方程并结合边界条件得到了稳定问题的屈曲方程。给出了临界应力的算例。     

Bending of elastic plates with a physically nonlinear inclusion

An infinite elastic isotropic plate with an elliptical, physically nonlinear inclusion loaded at infinity by uniformly distributed moments is considered. Surface loads are absent. The problem of the stress-strain state of the plate is solved in a closed form. It is shown that, for reasonably general stress-strain relations for the inclusion, the bending-moment field (and the corresponding curvatures) in the inclusion is homogeneous. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 47, No. 6, pp. 152–157, November–December, 2006.     

ANALYSIS ON THE MAGNETO-ELASTIC-PLASTIC BUCKLING/SNAPPING OF CANTILEVER RECTANGULAR FERROMAGNETIC PLATES

An analysis of buckling/snapping and bending behaviors of magneto-elastic-plastic interaction and coupling for cantilever rectangular soft ferromagnetic plates is presented.Based on the expression of magnetic force from the variational principle of ferromagnetic plates,the buckling and bending theory of thin plates,the Mises yield criterion and the increment theory for plastic deformation,we establish a numerical code to quantitatively simulate the behaviors of the nonlinearly multi-fields coupling problems by the finite element method.Along with the phenom- ena of buckling/snapping and bending,or the characteristic curve of deflection versus magnitude of applied magnetic fields being numerically displayed,the critical loads of buckling/snapping, and the influences of plastic deformation and the width of plate on these critical loads,the plastic regions expanding with the magnitude of applied magnetic field,as well as the evolvement of deflection configuration of the plate are numerically obtained in a case study.