Reconstruction and interpretation of photon Doppler velocimetry spectrum for ejecta particles from shock-loaded sample in vacuum

The photon Doppler velocimetry(PDV) spectrum is investigated in an attempt to reveal the particle parameters of ejecta from shock-loaded samples in a vacuum. A GPU-accelerated Monte–Carlo algorithm, which considers the multiplescattering effects of light, is applied to reconstruct the light field of the ejecta and simulate the corresponding PDV spectrum.The influence of the velocity profile, total area mass, and particle size of the ejecta on the simulated spectra is discussed qualitatively. To facilitate a quantitative discussion, a novel theoretical optical model is proposed in which the singlescattering assumption is applied. With this model, the relationships between the particle parameters of ejecta and the peak information of the PDV spectrum are derived, enabling direct extraction of the particle parameters from the PDV spectrum.The values of the ejecta parameters estimated from the experimental spectrum are in good agreement with those measured by a piezoelectric probe.     

超临界CO2布雷登循环热电联供系统多目标优化

本文研究了以超临界CO₂布雷登循环为原动机的热电联供系统,对系统主要运行参数进行了分析,得到运行参数对于系统热力学性能和经济性能的影响规律。同时,以一次能源利用率和单位输出成本作为目标函数,采用多目标遗传算法对系统进行了优化;在优化结果的基础上,通过TOPSIS法决策出最优解,并与单目标最优解进行对比。结果表明,透平进口温度、透平进口压力和压缩机进口温度的增大有利于系统效率的提高;作为代价,成本也相应增加。在热电比0~4范围内,尽可能增大热电比能够最大程度上降低系统的单位输出成本,提高能源的利用率。     

Improvement of interfacial adhesion in PP/PS blends enhanced with supersonic atmosphere plasma spraying surface‐treated carbon fiber

The effects of surface treatment of a carbon fiber (CF) by supersonic atmosphere plasma spraying (SAPS) on the interfacial adhesion behavior and morphology of polypropylene/polystyrene (PP/PS) matrix blends filled CF composites were investigated. Effects of surface treated a commercial CF on mechanical properties are studied. Contact angle was measured to examine the changes in wettability of the CF. The chemical and morphological changes were characterized by using X‐ray photoelectron spectroscopy and scanning electron microscopy. PP/PS/CF composites were fabricated with and without SAPS treatment, and their interlaminar fracture toughnesses were compared. The results showed that the interlaminar shear strength of composites has been greatly improved filled SAPS modification CF. The water contact angle of resin sample decreased 50% after addition of SAPS surface‐treated CF. Scanning electron microscopy results on the fractured surface exhibited PP/PS blends adhered well around the CFs of the SAPS‐treated specimen compared with that of the untreated specimen. This attributed to the CF interlock, and it improves the wetting between fibers and resins. Copyright © 2017 John Wiley & Sons, Ltd.     

Interrelationship between total volatile organic compounds emissions,structure and properties of natural rubber/polycaprolactone bio-blends cross-linked with peroxides

Natural rubber/polycaprolactone (NR/PCL) bio-based blends with different organic peroxides were prepared using an internal batch mixer and subsequently cross-linked at 170 °C. Two types of commonly used organic peroxides, dicumyl peroxide and di(tert-butylperoxyisopropyl)benzene peroxide, were applied as free-radical initiator. Cross-linking efficiency of NR/PCL blends were investigated using oscillating disc rheometer measurements, followed by infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis and tensile testing. Total volatile organic compounds (TVOCs) emissions were determined using headspace analysis integrated with gas chromatography with flame ionization detector. Determined TVOCs emissions varying in range 21.6–52.1 μg/g and generally value of this parameter decreased with increasing content of PCL phase in studied blends or with application of more efficient di(tert-butylperoxyisopropyl)benzene peroxide as cross-linking agent. It was found that increasing of TVOCs parameter indicated deterioration of mechanical properties of NR/PCL blends, which corresponded with the changes in chemical structure and thermal properties of cross-linked NR/PCL. This confirms that evaluation of TVOCs parameter is interesting alternative for “conventional methods” to characterization of the studied bio-based blends.     

Application of fractional calculus methods to asymmetric dynamical response of CB-Filled rubber

Frequency-sweep tests at various temperatures were conducted to study the asymmetric dynamic response of carbon black (CB) filled rubber. The master curves of storage modulus were constructed by use of time-temperature superposition (TTS), and the dynamic response of the material over a wide range of frequencies covering about 20 decades exhibits asymmetry. Based on the experimental results, the fractional Zener model and Prony series are verified to be unsuitable to reproduce the dynamicviscoelastic behavior. Therefore, a modified model by adding a spring-pot into the fractional Zener model is presented. The applicability of the modified model in describing the dynamic behavior of the CB-filled rubber is validated by the experimental results.     

Lipophilic counterion effect on aggregation and adsorption behavior of quaternary ammonium surfactants

The obvious different aggregation and adsorption behavior of six newly quaternary ammonium surfactants with different lipophilic counterions has been discoverd by measurements of equilibrium and dynamic surface tension, fluorescence and conductivity. Interestingly, the critical micelle concentration (CMC) and its surface tension γ_CMC decrease with the increasing counterion chain length. However, three methods have confirmed that an exception of CMC increases slightly from C₁₆NC₁ to C₁₆NC₂. According to experimental results, a balanced mechanism between hydrophobicity and electrostatic of counterion is proposed. Besides, the dynamic surface tension results show the diffusion coefficient increases with the increasing counterion length both at a short time (D_t?→?0) and long time (D_t?→?∞), which indicates a faster adsorption process. Unlike the inorganic counterion, the diffusion coefficient decreases with the increase of hydrophobic chain length. This is attributed to the strong electrostatic interactions between counterions and cationic headgroups.     

DYNAMICS MODELING,SIMULATION, AND CONTROL OF ROBOTS WITH FLEXIBLE JOINTS AND FLEXIBLE LINKS$^{\bf 1)}$

本文探究了铰柔性对机器人动力学响应和动力学控制的影响. 首先, 建立由$n$个柔性铰和$n$个柔性杆组成的空间机器人模型, 运用递推拉格朗日动力学方法, 得到柔性机器人系统的刚柔耦合动力学方程. 在动力学建模过程中, 除了考虑杆件的拉伸变形、弯曲变形、扭转变形以及非线性耦合变形对机器人系统动力学行为的影响, 还考虑了铰的柔性对机器人动力学响应和控制的影响. 其中, 柔性铰模型是基于Spong的柔性关节简化模型, 将柔性铰看成线性扭转弹簧, 不仅考虑了铰阻尼的存在, 还考虑了柔性铰的质量效应. 其次, 编写了空间柔性铰柔性杆机器人仿真程序, 研究铰的刚度系数和阻尼系数对系统动力学响应的影响. 研究表明: 随着柔性铰刚度系数的增大, 柔性机器人的动态响应幅值减小, 振动频率变大. 随着柔性铰阻尼系数的增大, 柔性机器人的动态响应幅值减小, 振动幅值的衰减速度变快. 可通过调节柔性铰的刚度和阻尼来减小柔性铰柔性杆机器人的振动, 因此铰阻尼的研究具有重要工程意义. 最后, 研究了铰柔性在机器人系统动力学控制中的影响. 在刚性铰机械臂和柔性铰机械臂完成相同圆周运动时, 通过逆动力学方法求解得到两种情况下的关节驱动力矩. 研究表明: 引入柔性铰会使控制所需的驱动力矩变小, 对机器人控制的影响显著.     

大型转子—基础—土壤系统的动力分析

本文对大型汽轮发电机组-基础-土壤系统采用模态综合技术进行了动力分析.用弹性半空间理论建立土壤的模型,基础底板则通过弹性薄板的李兹(Ritz)函数近似解的形式来描述.用三维梁单元来建立基础底板以上的框架结构和转子系统的运动方程.此外,还用模态应变能的相对大小,在这种复杂机械结构系统存在的众多固有频率中,区分出哪些是属于主要为转子系统的固有频率,称为“重要振动固有频率”,以确定系统的临界转速.最后,对引进的一台500MW汽轮发电机组的动力特性进行了分析.     

铝-锂合金动态扭转实验研究

利用霍普金森扭杆（Torsional Split-Hopkinson Bar）技术对三种不同成份或状态的铝-锂合金材料的动态应力-应变-应变率关系进行了实验测定。应变率范围由1300s-1到2600s-1,研究表明随着应变率的提高,三种不同成份或状态的铝-锂合金材料的韧性和强度都有不同程度的提高。对剪切带的初步观察发现,随应变率的增加,剪切带有变窄的趋势。     

Behavior of viscoelastic glass bead suspensions under superposed flows

Parallel superposed flows may be useful in order to explain the rheological behavior of viscoelastic suspensions. It has been shown that relaxation times of molecules are affected by a combined flow, and the rheological behavior of glass bead suspensions in a viscoelastic medium is explaned in terms of such variations.