用硅双结型色敏器件测量色温

提出了一种用硅双结型色敏器件测量色温的方法．在合理的测控电路下，硅双结型色敏器件的电流对数比与实验灯泡的色温值呈良好的单值对应，经单片机处理后可以得到分段线性关系．通过对电流对数比与波长随线的数据拟合，结果表明，用硅双结型色敏器件测量色温，其测量温度可以到10^4K以上，精度可以达到10K．本文的方法与传统方法相比减少了工作量，降低了费用，具有通用性和实用价值．     

Layered Double Hydroxide as Cordycepin Delivery Nanocarrier

Layered double hydroxides (LDHs), also called “anionic clays”, have received considerable attention due to their technological importance in catalysis, adsorption, optics, nanocomposite engineering materials and medical science1-5. LDHs are layered mate…     

Three Dimension Simulation of Millimeter Wave Double Staggered Coupled Cavity Structure

After analyzed the cavity field mean method theory resolution, the software simulation method to obtain the resonance frequency, Q value and RF dispersion by MAFIA and ANSYS software is discussed for the double staggered coupled cavity Millitron structure in the millimeter-wave TWT. The resonance frequency and Q value of the single cavity is obtained and is consistent with two kind of the simulation software. Their average error is about 0.6%. The two kind of the simulation result is consistent to the design precise. The simulation method saves on the cost and time in the experiment, improve the data precise and work efficiency. The trend of the dispersion simulation result is consistent with the cavity field mean method theory result. The high end of the theory result is great contrast to that of MAFIA result. It shows that the theory adopt some hypothetical conditions, But the theory result has some instructional signification in initialization design of the novel slow wave structure.     

包层泵浦的L波段Er3+/Yb3+共掺光纤激光器

报道了一种工作波长在L波段的包层泵浦Er³⁺/Yb³⁺共掺光纤环形激光器. 环形腔内的激光工作介质为一段9 m长的Er³⁺/Yb³⁺共掺高掺杂光纤. 利用6个976 nm LD同时抽运前段Er³⁺/Yb³⁺共掺双包层光纤产生的放大自发辐射谱作二次抽运源, 使腔内增义谱由C波段移到L波段, 实现了L波段光纤激光器的稳定输出; 采用包层泵浦技术, 在抽运功率为3594.5 mW时, 测得泵浦入纤功率为2731.8 mW, 实现了输出连续功率最大518.4 mW,斜率效率达到19% 的激光输出; 所形成激光的工作波长为1613.94 nm, 激光光谱的3 dB带宽为1.5 nm, 边模抑制比接近于50 dB.     

12参双参数矩形板元的误差估计

双参数方法是构造高阶问题有限元的有效方法．以此方法构造的双参数元是一种非标准元，以往文献中只证明了它的收敛性．此文针对具体12参双参数矩形板元给出它的误差估计式，并分析了节点参数的扰动量．文中的分析方法也适合于其它双参数矩形板元的误差估计．     

平板边界层转捩过程中低频信号的产生

利用Fourier频谱分析和小波变换处理在平板边界层转捩过程中测得的速度信号,观察到频谱中存在低于基本扰动波频率的含能信号,即文中所谓的低频信号.在进一步分析中,发现这种低频信号的产生可能与流动的间歇性有关.由于流动的间歇性导致速度信号的脉动,数据结构产生间歇变化,这种信号并不一定对应于流场中的某一物理结构的真实频率 关键词： 边界层 转捩 Fourier频谱分析 小波变换     

Al原子共振双线跃迁几率实验研究

我们用Nd：YAG脉冲激光烧蚀金属Al靶产生等离子体，利用时间分辨技术摄取Al等离子体辐射时间分辨谱，获得Al原子共振双线辐射谱；通过积分谱线下的面积，计算共振双线强度；根据共振双线强度比，推断Al原子共振双线跃迁几率比，并与理论计算结果比较。结果发现，实验结果与理论计算符合的很好。     

On Grüss Type Inequalities for Double Integrals

We establish two new inequalities of Grüss type involving functions of two independent variables. The analysis used in the proofs is elementary and our results provide new estimates on inequalities of this type.     

Physicochemical Studies of the Sea-Surface Microlayer

In physicochemical studies on the sea-surface microlayer (SML) in seawater, the main researches conducted were as follows: (1) It was found that there is an objective layer of sudden change in physical and chemical properties between the SML and the subsurface layer in seawater. (2) The SML thickness was determined and should be about 50±10 μm. (3) The Gibbs model of the SML was extended, and the multilayer model of the SML was advanced. (4) The original-location method, which corresponds with the traditional removal-location method, was founded and used to determine the SML thickness. The results obtained from the two methods were almost identical. (5) An abnormal phenomenon was found when the Gibbs solution adsorption was applied to the seawater system, the reason for which was discussed preliminarily.