Eartip modifications for more accurate acoustic length estimations of ear canal models or calibration cavities

The cross-sectional discontinuity between a probe eartip and an ear canal (EC) causes the latter to “acoustically” appear longer than it is “geometrically”. In this study, the idea of whether modifications within the eartip geometry can reduce this length overestimation was investigated: (i) upon extending one of the connecting (sound or microphone) tubes and (ii) upon sinking the entire probe tube assembly into the eartip. Finite element models of the eartip modifications were created, and validated by measurements on rigid EC models using eartip prototypes. Whereas extending the sound tube yielded no considerable effect, extending the microphone tube by 2 mm counterbalanced the discontinuity effect for a 12 mm diameter EC model. Alternatively, sinking the tube assembly 2 mm into the eartip allowed for radially symmetric sound radiation at the discontinuity, which was then described by a series inductance in the lumped-element equivalent circuit. Whereas this elaborate modification with the recess is more appropriate for calibration purposes (where the exact geometry of a calibration cavity or EC simulator is known), a microphone extension is more practical when a rough length estimate of large-diameter ECs is required. In most practical applications, discontinuity effects can be accounted for by using modified eartips.     

Improved third‐order weighted essentially nonoscillatory scheme

A new third‐order WENO scheme is proposed to achieve the desired order of convergence at the critical points for scalar hyperbolic equations. A new reference smoothness indicator is introduced, which satisfies the sufficient condition on the weights for the third‐order convergence. Following the truncation error analysis, we have shown that the proposed scheme achieves the desired order accurate for smooth solutions with arbitrary number of vanishing derivatives if the parameter ε satisfies certain conditions. We have made a comparative study of the proposed scheme with the existing schemes such as WENO‐JS, WENO‐Z, and WENO‐N3 through different numerical examples. The result shows that the proposed scheme (WENO‐MN3) achieves better performance than these schemes.     

内部压力作用下矩形板中源于椭圆孔的分支裂纹应力强度因子的一种数值分析

应用一种边界元方法来研究内部压力作用下矩形板中源于椭圆孔的分支裂纹。该边界元方法由Crouch与Starfied建立的常位移不连续单元和笔者最近提出的裂尖位移不连续单元构成。在该边界元方法的实施过程中,左、右裂尖位移不连续单元分别置于裂纹的左、右裂尖处,而常位移不连续单元则分布于除了裂尖位移不连续单元占据的位置之外的整个裂纹面及其它边界。本数值结果进一步证实这种数值方法对计算有限大板中复杂裂纹的应力强度因子的有效性,同时该数值结果可以揭示裂纹体几何对应力强度因子的影响。     

A numerical method for the first-order wave equation with discontinuous initial data

We introduce a method, constructed such that numerical solutions of the wave equation are well behaved when the solutions also contain discontinuities. The wave equation serves as a model problem for the Euler equations when the solution contains a contact discontinuity. Numerical computations of linear equations and the Euler equations in one and two dimensions are presented. © 1998 John Wiley & Sons, Inc. Numer Methods Partial Differential Eq 14: 353–365, 1998     

关于二级相变中热力学物理量突变的分析与自旋链模拟

理论上对二级相变中热容、体膨胀系数、等温压缩系数三个热力学物理量的变化进行了分析,进而使用自旋链模型的基态能量和von Neumann熵随模型参数变化的突变行为对二级相变中这三个物理量的变化所引起的系统序变进行模拟,得到二级相变中热容、体膨胀系数、等温压缩系数的变化是由于系统内部微观上发生关联序变的结果。     

拉伸载荷作用下单边缺陷-边裂纹应力强度因子研究

利用杂交位移不连续法研究拉伸载荷作用下矩形板中单边缺陷-边裂纹(半圆孔裂纹和半方孔裂纹)问题,给出了这三种平面弹性裂纹问题的应力强度因子的详细数值解。通过半圆孔裂纹问题和半方孔裂纹问题与单边裂纹问题的应力强度因子的比较,发现半圆孔和半方孔对单边裂纹有屏蔽影响。此外,本文的研究结果表明,杂交位移不连续法用于分析平面弹性有限体中复杂裂纹问题的应力强度因子简单且又准确。     

Discontinuity and Protection of Quantum Fisher Information for a Two-Qubit System

We analytically investigate the dynamics of quantum Fisher information of two qubits in independent environments for both uncorrelated and entangled input states. Especially, we observe that, in the non-Markovian regime and resonant case, quantum Fisher information of uncorrelated input state vanishes only at discrete time point whereas that of entangled input state can disappear during finite time interval. It shows that quantum Fisher information, which determines the parameter estimation precision, is strongly affected by the environment memory effects, and the advantage of entanglement-enhance metrology no longer exists even for a very short time. We also note that quantum Fisher information for two kinds of input states can be preserved under appropriate qubit-reservoir detuning.     

FATIGUE GROWTH MODELING OF MIXED-MODE CRACK IN PLANE ELASTIC MEDIA

This paper presents an extension of a displacement discontinuity method with cracktip elements （a boundary element method） proposed by the author for fatigue crack growth analysis in plane elastic media under mixed-mode conditions. The boundary element method consists of the non-singular displacement discontinuity elements presented by Crouch and Starfield and the crack-tip displacement discontinuity elements due to the author. In the boundary element implementation the left or right crack-tip element is placed locally at the corresponding left or right crack tip on top of the non-singular displacement discontinuity elements that cover the entire crack surface and the other boundaries. Crack growth is simulated with an incremental crack extension analysis based on the maximum circumferential stress criterion. In the numerical simulation, for each increment of crack extension, remeshing of existing boundaries is not required because of an intrinsic feature of the numerical approach. Crack growth is modeled by adding new boundary elements on the incremental crack extension to the previous crack boundaries. At the same time, the element characteristics of some related elements are adjusted according to the manner in which the boundary element method is implemented. As an example, the fatigue growth process of cracks emanating from a circular hole in a plane elastic plate is simulated using the numerical simulation approach.     

CONDUCTIVITY BEHAVIOR OF IONIC AI(OH)3-POLYACRYLAMIDE HYBRIDS IN AQUEOUS SOLUTIONS

The conductivity behavior of Al(OH)3-acrylamide hybrid polyacrylamide (hybrid PAAm) in distilled water was studied. A discontinuity phenomenon of the conductivity (k) versus concentration (c) curve of the hybrid PAAm in a certain concentration regime is found. This phenomenon is dependent on the molecular weight of the hybrid PAAm and on the particle size and content of the Al(OH)3 colloid in the hybrid PAAm. This phenomenon was accounted for assuming ionization of the hybrid PAAm.