Existence of solutions of semilinear stochastic delay evolution inclusions in a Hilbert space

In this paper the existence of mild solutions of a class of semilinear stochastic evolution inclusions with delays in a Hilbert space is studied. The results are obtained by using a fixed point theorem for condensing map due to Martelli. The result is illustrated with an example.     

Effective elastic properties of doubly periodic array of inclusions of various shapes by the boundary element method

A rectangular cell of known boundary conditions is cut out from a medium containing the doubly periodic array of inclusions. The stress and strain relationship of the rectangular cell is obtained by using the classical boundary element methods. By matching the boundary condition requirements, the effective elastic properties of the doubly periodic array of inclusions can then be calculated. Numerical examples from the sub-domain boundary element method and the single domain boundary element method are compared and discussed. However, the present method cannot be readily extended to domains having circular or curved boundary parts.     

New exact results for the effective electric, elastic, piezoelectric and other properties of composite ellipsoid assemblages

In this paper we present a unified treatment of composite ellipsoid assemblages in the setting of uncoupled phenomena like conductivity and elasticity and coupled phenomena like thermoelectricity and piezomagnetoelectricity. The building block of this microgeometry is a confocal ellipsoidal particle consisting of a (possibly void) core and a coating. All space is filled up with such units which have different sizes but possess the same aspect ratios. The confocal ellipsoids may have the same orientation in space or may be randomly oriented. The resulting microgeometry simulates two-phase composites in which the reinforcing components are short fibers or elongated particles. Our main interest is in obtaining information of an exact nature on the effective moduli of this microgeometry whose effective tensor symmetry structure depends on the packing mode of the coated ellipsoids. This information will sometimes be complete like the full effective thermoelectric tensor of an assemblage which contains aligned ellipsoids in which the coating is isotropic and the core is arbitrarily anisotropic. In the majority of the cases however the maximum achievable exact information will be only partial and will appear in the form of certain exact relations between the effective moduli of the microgeometry. These exact relations are obtained from exact solutions for the fields in the microstructure for a certain set of loading conditions. In all the considered cases an isotropic coating can be combined with a fully arbitrary core. This covers the most important physical case of anisotropic fibers in an isotropic matrix. Allowing anisotropy in the coating requires the fulfillment of certain constraint conditions between its moduli. Even though in this case the presence of such constraint conditions may render the anisotropic coating material hypothetical, the value of the derived solutions remains since they still provide benchmark comparisons for approximate and numerical treatments. The remarkable feature of the general analysis which covers all treated uncoupled and coupled phenomena is that it is developed solely on the basis of potential solutions of the conduction problem in the same microgeometry.     

Three-dimensional micromechanical modeling of voided polymeric materials

A three-dimensional micromechanical unit cell model for particle-filled materials is presented. The cell model is based on a Voronoi tessellation of particles arranged on a body-centered cubic (BCC) array. The three-dimensionality of the present cell model enables the study of several deformation modes, including uniaxial, plane strain and simple shear deformations, as well as arbitrary principal stress states.The unit cell model is applied to studies on the micromechanical and macromechanical behavior of rubber-toughened polycarbonate. Different load cases are examined, including plane strain deformation, simple shear deformation and principal stress states. For a constant macroscopic strain rate, the different load cases show that the macroscopic flow strength of the blend decreases with an increase in void volume fraction, as expected. The main mechanism for plastic deformation is broad shear banding across inter-particle ligaments. The distributed nature of plastic straining acts to reduce the amount of macroscopic strain softening in the blend as the initial void volume fraction is increased. In the case of plane strain deformation, the plastic flow is observed to initiate across inter-particle ligaments in the direction of constraint. This particular mode of deformation could not have been captured using a two-dimensional, plane strain idealization of cylindrical voids in a matrix.The potential for localized crazing and/or cavitation in the matrix is addressed. It is observed that the introduction of voids acts to relieve hydrostatic stress in the matrix material, compared to the homopolymer. It is also seen that the predicted peak hydrostatic stress in the matrix is higher under plane strain deformation than under triaxial tension (with equal lateral stresses), for the same macroscopic stress triaxiality.The effect of void volume fraction on the macroscopic uniaxial tension behavior of the different blends is examined using a Considère construction for dilatant materials. The natural draw ratio was predicted to decrease with an increase in void volume fraction.     

Existence and exact controllability of fractional evolution inclusions with damping

The aim of this paper is to deal with the existence of mild solutions and exact controllability for a class of fractional evolution inclusions with damping (FEID, for short) in Banach spaces. Firstly, we provide the representation of mild solutions for FEID by applying the method of Laplace transform and the theory of (α,κ)‐regularized families of operators. Next, we are concerned with the existence and exact controllability of FEID under some suitable sufficient conditions by using the method of measure of noncompactness and an appropraite fixed point theorem. Finally, an application to nonlinear partial differential equations with temporal fractional derivatives is presented to illustrate the effectiveness of our main results. Copyright © 2017 John Wiley & Sons, Ltd.     

Application of a new fast multipole BEM for simulation of 2D elastic solid with large number of inclusions

A fast multipole method (FMM) is applied for BEM to reduce both the operation and memory requirement in dealing with very large scale problems. In this paper, a new version of fast multipole BEM for 2D elastostatics is presented and used for simulation of 2D elastic solid with a large number of randomly distributed inclusions combined with a similar subregion approach. Generalized minimum residual method (GMRES) is used as an iterative solver to solve the equation system formed by BEM iteratively. The numerical results show that the scheme presented is applicable to certain large scale problems. The project supported by the National Nature Science Foundation of China (10172053) and the Ministry of Education     

Short-term microdamage of a physically nonlinear particulate material under a combination of normal and tangential loads

The structural theory of short-term damage is generalized to the case where the undamaged components of a particulate composite deform nonlinearly under loads that induce a compound stress state. The basis for this generalization is the stochastic elasticity equations for a particulate composite with porous components whose skeletons deform nonlinearly. Damage in a microvolume of the material is assumed to occur in accordance with the Huber-Mises failure criterion. Balance equations for damaged microvolume are derived for the physically nonlinear materials of the components. Together with the macrostress-macrostrain relationship for a particulate composite with porous nonlinear components, they constitute a closed-form system of equations. This system describes the coupled processes of physically nonlinear deformation and microdamage. Algorithms for calculating the microdamage-macrostrain relationship and plotting stress-strain curves are proposed. Such curves are plotted for the case where the composite is subjected to a combination of normal and tangential loads, and microdamages occur in the linearly hardened matrix and do not in the linearly elastic inclusions. The stress-strain curves are examined depending on the volume fraction of inclusions and presence of tangential stresses __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 12, pp. 48–57, December, 2006.     

含夹杂复合材料宏观性能研究

本文综述并评价了有关含夹杂复合材料的有效弹性模量研究的代表性工作，包括自洽理论，微分法，Ｅｓｈｅｌｂｙ－Ｍｏｒｉ－Ｔａｎａｋａ法，Ｈａｓｈｉｎ和Ｓｈｔｒｉｋｍａｎ的变分法等。指出上述理论由于没有充分考虑复合材料内部的微结构特征，如夹杂的形状、几何尺寸、分布和夹杂间的相互影响，在夹杂的体积份数较大，如大于０．３时已不能有效地预报复合材料的有效弹性模量，随后介绍了近来才发展起来的一种新方法─—相关函数积分法，理论与实验的结果的比较表明，该方法在夹杂体积份数较大时仍然有效。     

一类新的含（A，η）-增生算子的广义混合拟-似变分包含组

介绍和研究了实q-一致光滑Banach空间中一类新的具（A,η）一增生算子的广义混合拟一似变分包含组,利用（A,η）一增生算子的预解算子技巧,证明了解的存在性及由新的P步迭代算法所生成序列的收敛性．     

Singular Functions and Characterizations of Field Concentrations: a Survey

In the presence of closely located inclusions of the extreme material property, the physical fields, such as the electric field and the stress tensor, may be concentrated and arbitrarily large in the narrow region between two inclusions. Recently there has been significant progress on the quantitative characterization of the field concentration in the contexts of electrostatics(Laplace equation), linear elasticity(Lamé system), and viscous flow(Stokes system). This paper is to review such progress in a coherent way.