考虑防御系统延迟使其预测误差最大的突防弹道设计

对中段多脉冲机动突防弹道的设计问题进行了研究。采用的原理与方法有别于成熟的航天器多脉冲变轨,而是基于路径规划的思想对弹道设计问题简化。考虑敌方防御系统延迟,改进多脉冲点火模型,并基于变射面的思想对关机点参数进行了设计及优化。然后,从使敌方预测误差最大的角度提出评价函数,并利用遗传算法进行优化。最后,给出了一种同时满足导弹机动突防与打击精度要求的多脉冲弹道设计方法。从模型的可行性,方法的有效性、灵活性、迭代效率及精度等方面进行了仿真验证分析。在PC机仿真中,20 s内就设计出一条保证打击精度的中段突防弹道。结果表明,建立的模型是可行的,提出的突防弹道设计方法是快速有效的。     

The research on temperature measurement based on polarization dependent loss

This paper analyzes the properties of reflected polarization dependent loss of apodized fiber Bragg gratings with temperature effective. We simulates reflected spectrum and polarization dependent loss of the apodized fiber Bragg gratings. The reflected spectrum and polarization dependent loss are measured under different temperatures. The analysis results show that reflected polarization dependent loss presents two peaks which shift an equal proportion to long wavelength with temperature increasing and have very good stability so we propose an idea that use polarization dependent loss as temperature sensor measurement parameters. The results show that the accuracy of measurement can be increased almost by one order of magnitude.     

The inventory models under conditional trade credit in a supply chain system

In several recent investigations dealing with the economic order quantity with permissible delay in payments, the following assumptions are made:     

Uniform persistence for population interaction models with time delay

In this paper uniform persistence is establised for kolmogorov type Prey‐Predator and competion models with per capitals ent growth rates that are dependent on time‐lagged population densities.     

Size‐dependent mechanical properties of glassy polymer nanofibers via molecular dynamics simulations

The microstructure of polymer matrix under cylindrical confinement is key to understanding the size‐dependent thermomechanical behavior of electrospun nanofibers. Coarse‐grained molecular dynamics simulation was applied here to probe polymer systems under cylindrical confinement, prepared with or without pre‐stretching. Simulation results showed that below a certain radius, a noticeable increase of the elastic modulus is observed with the decrease of the radius of cylindrical confinement. This size‐dependent mechanical behavior correlated to the degree of polymer chain orientation. Modulation of density and bond orientation in the radial direction was observed: the density and bond orientation began to oscillate, increasing the oscillation amplitudes with decreases in the radius. Such behavior suggests that the cylindrical confinement enhances the bond alignment of the entire fiber and not in the near‐surface layers only. The unstretched fibers had uniform density distribution along the fiber axis, while the stretched fibers demonstrated a fluctuation in density distribution. The crossover radius of size‐dependent behavior was two orders of magnitude smaller than observed in real experiments, demonstrating that the confinement affects some internal fiber scale, which exceeds the scale of individual macromolecules, and this internal scale may be related to supramolecular structures of the polymer matrix rather than the individual macromolecules. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 506–514     

Optimal feedback gains of a delayed proportional-derivative (PD) control for balancing an inverted pendulum

In the dynamics analysis and synthesis of a con-trolled system, it is important to know for what feedback gains can the controlled system decay to the demanded steady state as fast as possible. This article presents a sys-tematic method for finding the optimal feedback gains by taking the stability of an inverted pendulum system with a delayed proportional-derivative controller as an example. First, the condition for the existence and uniqueness of the stable region in the gain plane is obtained by using the D-subdivision method and the method of stability switch. Then the same procedure is used repeatedly to shrink the stable region by decreasing the real part of the rightmost charac-teristic root. Finally, the optimal feedback gains within the stable region that minimizes the real part of the rightmost root are expressed by an explicit formula. With the optimal feedback gains, the controlled inverted pendulum decays to its trivial equilibrium at the fastest speed when the initial val-ues around the origin are fixed. The main results are checked by numerical simulation.     

Stability analysis for stochastic jump systems with time-varying delay

This paper deals with the mean-square asymptotic stability of stochastic Markovian jump systems with time-varying delay. Based on a new stochastic inequality and convex analysis property, some novel stability conditions are presented. In the derivation, the information of the time-varying delay is retained and the estimation of it by the worst-case enlargement is not involved. Some special cases of the systems under consideration are also investigated. Illustrative examples are given to show the effectiveness of the proposed approach.     

A new level‐dependent coarse grid correction scheme for indefinite Helmholtz problems

In this paper, we construct and analyze a level‐dependent coarse grid correction scheme for indefinite Helmholtz problems. This adapted multigrid (MG) method is capable of solving the Helmholtz equation on the finest grid using a series of MG cycles with a grid‐dependent complex shift, leading to a stable correction scheme on all levels. It is rigorously shown that the adaptation of the complex shift throughout the MG cycle maintains the functionality of the two‐grid correction scheme, as no smooth modes are amplified in or added to the error. In addition, a sufficiently smoothing relaxation scheme should be applied to ensure damping of the oscillatory error components. Numerical experiments on various benchmark problems show the method to be competitive with or even outperform the current state‐of‐the‐art MG‐preconditioned Krylov methods, for example, complex shifted Laplacian preconditioned flexible GMRES. Copyright © 2013 John Wiley & Sons, Ltd.     

Qualitative and quantitative determination of Atractylodes rhizome using ultra‐performance liquid chromatography coupled with linear ion trap–Orbitrap mass spectrometry with data‐dependent processing

A quick and effective workflow based on ultra‐performance liquid chromatography coupled with electron spray ionization and LTQ‐Orbitrap mass spectrometry (UPLC‐LTQ‐Orbitrap MS) was established for compositional analysis and screening of the characteristic compounds of three species of Atractylodes rhizome for quality evaluation. This technique was employed to determine the seven main components in Atractylodes rhizome samples. Ultimately, 78 constituents were identified; of these, seven characteristic compounds were selected for species discrimination, comprising atractylodin (63), atractylenolide I (43), atractylenolide II (49), atractylenolide III (53), atractylon (69), methyl‐atractylenolide II (54) and (4E,6E,12E)‐tetradecadecatriene‐8,10‐diyne‐1,3‐diacetate (59). The seven main compounds, including six characteristic compounds, were simultaneously determined in 29 batches of Atractylodes rhizome samples. Thus, the method validation showed acceptable results. Quantitative analysis showed significantly different contents of the seven main components among the three species of Atractylodes rhizome, which indicates possible distinctions in the pharmacological effects. This established method can simultaneously provide qualitative and quantitative results for compositional characterization of Atractylodes rhizomes and for quality control.     

Dose‐dependent exposure profile and metabolic characterization of notoginsenoside R1 in rat plasma by ultra‐fast liquid chromatography–electrospray ionization–tandem mass spectrometry

Notoginsenoside R₁ (NGR₁), a diagnostic protopanaxatriol‐type (ppt‐type) saponin in Panax notoginseng, possesses potent biological activities including antithrombotic, anti‐inflammatory, neuron protection and improvement of microcirculation, yet its pharmacokinetics and metabolic characterization as an individual compound remain unclear. The aim of this study was to investigate the exposure profile of NGR₁ in rats after oral and intravenous administration and to explore the metabolic characterization of NGR₁. A simple and sensitive ultra‐fast liquid chromatographic–tandem mass spectrometric method was developed and validated for the quantitative determination of NGR₁ and its major metabolites, and for characterization of its metabolic profile in rat plasma. The blood samples were precipitated with methanol, quantified in a negative multiple reaction monitoring mode and analyzed within 6.0 min. Validation parameters (linearity, precision and accuracy, recovery and matrix effect, stability) were within acceptable ranges. After oral administration, NGR₁ exhibited dose‐independent exposure behaviors with t_1/2 over 8.0 h and oral bioavailability of 0.25–0.29%. A total of seven metabolites were characterized, including two pairs of epimers, 20(R)‐notoginsenoside R₂/20(S)‐notoginsenoside R₂ and 20(R)‐ginsenoside Rh₁/20(S)‐ginsenoside Rh₁, with the 20(R) form of saponins identified for the first time in rat plasma. Five deglycometabolites were quantitatively determined, among which 20(S)‐notoginsenoside R₂, ginsenoside Rg₁, ginsenoside F₁ and protopanaxatriol displayed relatively high exploration, which may partly explain the pharmacodynamic diversity of ginsenosides after oral dose.