多道时间谱仪测量光速

介绍了多道时间谱仪的时间幅度变换原理，描述了谱仪的调试和主要指标的测定，并应用多道时间谱仪测量了光速．     

Ignition delay times of methane and hydrogen highly diluted in carbon dioxide at high pressures up to 300 atm

The need for more efficient power cycles has attracted interest in super-critical CO₂ (sCO₂) cycles. However, the effects of high CO₂ dilution on auto-ignition at extremely high pressures has not been studied in depth. As part of the effort to understand oxy-fuel combustion with massive CO₂ dilution, we have measured shock tube ignition delay times (IDT) for methane/O₂/CO₂ mixtures and hydrogen/O₂/CO₂ mixtures using sidewall pressure and OH* emission near 306?nm. Ignition delay time was measured in two different facilities behind reflected shock waves over a range of temperatures, 1045–1578?K, in different pressures and mixture regimes, i.e., CH₄/O₂/CO₂ mixtures at 27–286 atm and H₂/O₂/CO₂ mixtures at 37–311 atm. The measured data were compared with the predictions of two recent kinetics models. Fair agreement was found between model and experiment over most of the operating conditions studied. For those conditions where kinetic models fail, the current ignition delay time measurements provide useful target data for development and validation of the mechanisms.     

二个强飞秒延时激光脉冲的相对相位对Na2+光解离的影响

报道了Na₂⁺离子的三个低激发态1Σu、2Σg、2Σu在二个光脉冲作用下的解离动量谱,激光波长为680nm,各脉冲功率为1×10¹²W/cm²,脉宽50fs,从研究结果可见,其单光子、双光子、三光子激发的对应的解离峰及峰值随相对相位而变,并且这种影响随延时增大而减小.     

A multistep collocation method for solving advection equations with delay

Advection equations with delay are appeared in the modeling of the dynamics of structured cell populations. In this article, we construct an efficient two-dimensional multistep collocation method for the numerical solution of a class of advection equations with delay. Equations with aftereffect and equations with both aftereffect and retardation of a state variable are considered. Computability of the algorithm and convergence properties of the proposed numerical method are analyzed for solutions in appropriate Sobolev spaces, and it is shown that the proposed scheme enjoys the spectral accuracy. Numerical examples are given and comparison with other existing methods in the literature is made to demonstrate the efficiency, superiority and high accuracy of the presented method.     

TDI线扫相机光学通道建模与仿真

卫星相机建模与仿真研究不论在民用还是军事领域都具有重要的理论研究和实际应用价值。根据TDI线扫相机的工作原理建立了一个TDI线扫相机光学通道的数学模型,该模型包括从景物到TDI CCD离散图像的几何投影关系和能量传递关系两部分,对于确定的成像系统,给定景物参数和光学系统参数,就可以确定对应图像传感器上的离散图像。为了验证模型,对一幅卫星图像进行了计算机仿真。建立的模型可以用来研究当成像条件改变时对图像的影响,进一步还可以用来发展虚拟卫星相机系统。     

Scaling Laws for the Multidimensional Burgers Equation with Quadratic External Potential

The reordering of the multidimensional exponential quadratic operator in coordinate-momentum space (see X. Wang, C.H. Oh and L.C. Kwek (1998). J. Phys. A.: Math. Gen. 31:4329–4336) is applied to derive an explicit formulation of the solution to the multidimensional heat equation with quadratic external potential and random initial conditions. The solution to the multidimensional Burgers equation with quadratic external potential under Gaussian strongly dependent scenarios is also obtained via the Hopf-Cole transformation. The limiting distributions of scaling solutions to the multidimensional heat and Burgers equations with quadratic external potential are then obtained under such scenarios. AMS Subject Classifications: 60G60, 60G15, 62M15, 60H15     

低偏振相关损耗全息光栅波分复用器的设计

对基于掺杂铌酸锂材料的体光栅波分复用器主要结构和光栅记录参量提出了一种优化设计方法.采用严格耦合波理论,对两种偏振不同入射角和不同记录晶体厚度下的器件关键性能参量,如插入损耗和偏振相关损耗等进行了优化.数值结果证明采用优化设计的晶体厚度和光栅记录时的入射角,在获得相当低的偏振相关损耗的同时,也能够获得较低的插入损耗,实现了综合性能优化的波分复用器设计.实验结果证明用优化设计的参量能有效降低波分复用器件的插入损耗和偏振相关损耗.     

前馈PMD补偿实验中从偏振度椭球获得差分群时延的研究

运用偏振度(DOP)椭球法从实验的有限样点数据中获得了差分群时延和偏振主态方向,这为前馈补偿实验提供了最关键的技术因素.在实验中获得了偏振主态方向和DGD,而且当DGD较小时,从实验所获得的DGD值与理论模拟的变化趋势基本一致.结果表明当DGD较小时,可以用偏振度椭球法从实验上得到正确的DGD和偏振主态方向.     

受激发射损耗荧光显微镜的模型设计及参量优化

受激发射损耗荧光显微镜利用荧光饱和和激发态荧光受激损耗的非线性关系,通过限制损耗区域,可突破远场光学显微术的衍射极限分辨力并实现三维成像。基于对粒子速率方程组的修正,建立了描述荧光团各能级粒子数概率时间特性的模型,并定义了时间平均损耗效率判据。采用高斯函数模拟两束入射激光脉冲通过对模型的数值计算,模拟了激发脉冲的SIED激光脉冲的光强、脉冲宽度以及两束光的延迟时间等参量与损耗效率之间的关系,并获得了各参量的最佳值,优化了损耗效率,为提高系统分辨力提供了有效的途径。     

基于LMS自适应时延估计和FPGA的超声波测风系统研究

利用超声波传感器进行风速测量时,温度对超声波传播有很大影响,时延估计对超声波测风系统的精度起到很大的作用。本超声波测风系统为避免温度对风速测量中的影响,采用了基于时差法的测量原理,为了提高时延估计值的精度,提出了基于最小均方(LMS)自适应时延估计的测量方法,研制了以单片机Atmega128和现场可编程门阵列(FPGA)为核心的硬件系统。仿真和实际测试的结果表明,该超声波测风系统的时延估计值精确度较高,具有很高的应用价值。