基于支持向量机的羰基化合物红外光谱研究

设计了一个4层分等级分类系统，通过支持向量机技术对羰基化合物的红外光谱成功地进行了信息分类和提取，并与人工神经网络进行比较，结果表明：支持向量机对羰基类化合物红外光谱分类效果优于人工神经网络；另外详细探讨了表征酰胺类化合物的特征光谱峰片段对识圳伯仲叔酰胺的影响，证明了酰胺的N-H伸缩振动峰对识别伯仲叔酰胺贡献最大，为构建红外光谱智能解析系统提供了定量依据。     

钛胶的制备条件和物性关系

钛胶是新型有广泛用途的催化剂载体。本实验测定了钛胶的孔容、比表面积、铁含量和晶型结构；研究了钛胶的制备条件和物性关系，得到一些有实用价值的实验结果。     

王冠高聚物担载四核钴羰基簇催化剂的醛化反应活性

本文用二苯并-18-冠-6高聚物作因相化载体,通过化学健合,合成了担载的四核钴羰基簇催化剂Crown-Co_4。,并对该催化剂进行了元素分析、红外光谱及X射线光电子能谱(XPS)等方面的测试分析;还考察了不同温度、不同极性溶剂及不同类型烯烃对醛化活性的影响。实验证明,该催化剂对直链端位烯烃的醛化活性高于均相的苯基-四核钴羰基簇催化利Ph-Co_4。。二苯并-18-冠-6高聚物载体能明显改善催化性能。     

Synthesis of Nickel Supported Catalysts for Hydrogen Production by Sol-Gel Method

SiO₂ and Al₂O₃ supported Ni catalysts were synthesized in the form of xerogels: the SiO₂ based materials were prepared starting from Ni propionate or glycolate salts and reacting them with tetraethoxysilane (TEOS) in propionic acid, Si(ethylene glycolate) or sodium silicate. The Al₂O₃ supported catalysts were prepared similarly from Ni propionate salts with Al iso-propoxide salts. Narrow metal particles and strong metal support interactions are observed in the sol-gel catalysts. The metal dispersion was higher for Al₂O₃ based materials than the SiO₂ ones and it deeply depends on the Ni precursor for the silica supported Ni. Wet impregnated oxides with similar Ni loading have higher metal surface area than those from sol-gel processing. The influence of surface differences on the catalytic activity of the materials was studied following the CH₄ and CO₂ reaction in dry reforming conditions by pulse reaction tests.     

负载型纳米TiO2复合载体及其CoMo催化剂的酸性及孔特性的研究

总结了复载不同纳米尺度的复合载体及其CoMo催化剂的表面酸性及孔结构特性的表征结果。结果表明，负载型纳米TiO2与基载体γ-Al2O3存在着相互作用。当负载比较少量的纳米TiO2时，复合载体的总酸量随着TiO2含量的增加而增加，超过γ-Al2O3的酸量，但当 TiO2的含量比较高时复合载体的酸量又降低，纳米TiO2优先负载在γ-Al2O3的强酸中心位；负载了CoMo活性组分后酸量增加。不同粒径的纳米TiO2对复合载体和催化剂的酸分布没有明显影响，但对总酸量有影响。对不同尺度TiO2，随着TiO2负载量的增加以及负载金属活性组分的增加，表面积、孔容和最可几孔径均有不同程度的减少。     

Preparation and Properties of Composite Polypyrrole/Pt Catalyst Systems

Three different methods for the preparation and modification of conducting polymer/noble metal catalyst systems consisting of polypyrrole (PPy) and platinum (Pt) are described for the anodic oxidation of methanol. The first method consists of the electrochemical deposition of a thin PPy film on glassy carbon substrate, which is modified with Pt either by electroreduction of hexachloroplatinate, codeposition from a nanodispersed Pt solution, or incorporation of tetrachloroplatinate as counterion followed by cathodic reduction. A second method is based on the preparation of nanoscale PPy(PSS) particles by chemical polymerization with polystyrenesulfonate PSS^– as the counterion. This material is a favorable catalyst support for nanodispersed Pt due to its mixed electronic and cationic conductivity. To study the electrochemical properties, the particulate system PPy(PSS)/Pt is fixed in a carbon fiber electrode. A third method was developed which brings the polypyrrole in close contact to a proton exchanger membrane (Nafion) using a special chemical deposition procedure. This method is useful for preparing a membrane electrode assembly (MEA) consisting of Nafion/PPy/Pt. The structural, morphological, and electrocatalytic properties for methanol oxidation were studied depending on the preparation method applied using surface analytical techniques (TEM, SEM, and EDX) and electrochemical measurements (cyclic voltammetry and transient techniques).     

Synthesis and Investigation of Soluble Polymer-supported Dendrimers

Poly（ethylene glycol） （PEG）-supported dendrimers have been synthesized using 2.4,6-trichloro-1,3,5-triazine （TCT） as dendrons and tris（hydroxymethyl）aminomethane as tinkers with high loading capacity, excellent solubility and thermal stability by divergent method. The new synthesized PEG-supported G2.0 dendrimer has 10 times as large functional group loading capacity as commercial PEG3400 with overall yield 44.0%.     

内分子DIELS-ALDER反应合成DRIMANE类倍半萜化合物DRIMENIN, POLYGODIAL及CINNAMOLIDE的全合成

近年来有不少报道从事于生理活性Drimane类倍半萜的合成,较多采用了分子间Diels-Alder反应来建立Drimane的骨架。本文首次采用内分子Diels-Alder反应作为关键反应合成了Drimane类化合物。同时还在引入了手性诱导基团后,首次完成了从无手性的原料化合物β-紫罗兰酮至光学活性(-)-drimenin1的不对称合成。     

Characterization of a convection-based support microstructure through a flow resistance parameter

Modern convection-based supports differ substantially in pore size, porosity, and microstructure topology. Due to such variability, it is challenging to evaluate the contribution of a particular microstructure topology on flow resistance. We demonstrated that the flow resistance parameter ($\varphi$) introduced decades ago can be used as a criterion to evaluate the effect of microstructure topology on a pressure drop when the pore size is used as a characteristic support dimension. Furthermore, the $\varphi$ value of simple cubic packing was calculated over the entire range of open porosity and compared to the $\varphi$ values determined for pressure drop models derived for particular convection-based supports and experimental values of various convection-based supports from the literature. It was shown that different convection-based supports become clustered into distinct groups when plotted according to their $\varphi$ and open porosity values, allowing their discrimination.     

The effect of electrochemically treated glassy carbon on the activity of supported Pt catalyst in methanol oxidation

Effect of electrochemical oxidation of glassy carbon on deposition of platinum particles and electrocatalytic activity of platinum supported on oxidized glassy carbon (Pt/GC_OX) were studied for methanol oxidation in H₂SO₄ solution. Platinum was potentiostatically deposited from H₂SO₄ + H₂PtCl₆ solution. Glassy carbon was anodically polarised in 0.5 M H₂SO₄ at 2.25 V vs. saturated calomel electrode (SCE) during 35 s. Electrochemical treatment of GC support, affecting not significantly the real Pt surface area, leads to a better distribution of platinum on the substrate and has remarkable effect on the activity. The activity of the Pt/GC_OX electrode for methanol oxidation is larger than polycrystalline Pt and for more than one order of magnitude larger than Pt/GC electrode. This increase in activity indicates the pronounced role of organic residues of GC support on the properties of Pt particles deposited on glassy carbon.