Finite Time Extinction for Nonlinear Schrödinger Equation in 1D and 2D

We consider a nonlinear Schrödinger equation with power nonlinearity, either on a compact manifold without boundary, or on the whole space in the presence of harmonic confinement, in space dimension one and two. Up to introducing an extra superlinear damping to prevent finite time blow up, we show that the presence of a sublinear damping always leads to finite time extinction of the solution in 1D, and that the same phenomenon is present in the case of small mass initial data in 2D.     

UiO-66 and hcp UiO-66 Catalysts Synthesized from Ionic Liquids as Linker Precursors

Using ionic liquids (ILs) as linker precursors, the well-known metal-organic framework (MOF) UiO-66 (Universitetet i Oslo) and the recently reported MOF hcp UiO-66 (hexagonal closed packed) have been successfully synthesized and characterized. The advantage of the applied novel synthesis approach is an economically and environmentally benign work-up procedure, due to the better solubility of the IL. Additionally, the reactivity of the terephthalate anions is increased compared to terephthalic acid, resulting in faster MOF formation with an increased amount of defects in the MOF structure. In order to explore to the influence of defects on the catalytic performance, the cyclisation of citronellal to isopulegol was employed as test reaction. The activity of hcp UiO-66 and fcc UiO-66 (face centered cubic) is improved compared to other MOF or zeolite based catalysts, while the selectivity is similar.     

阻尼对空爆荷载等效静载动力系数的影响

为考查阻尼参数对空爆荷载等效静载动力系数的影响,理论推导了空爆荷载下结构等效单自由体系弹塑性位移解及延性比解,设计并计算了阻尼比0.000 1～0.1、延性比1～4的20种典型工况的动力系数,并与现行抗爆设计规范动力系数公式结果进行了对比。结果表明:阻尼比小于0.000 1时可基本代表无阻尼状态,阻尼比0.01的动力系数比无阻尼的最大降低幅度为2.08%,数值差异很小,因此阻尼比为0.01以内时,可忽略阻尼对动力系数的影响;阻尼比0.05的动力系数比无阻尼的降低幅度约9.92%,数值差异较大,认为阻尼比0.05以上时将具有明显的经济效益;现行设计规范动力系数更适用于柔性结构体系,运用于刚性结构抗爆设计时,计算误差较大,对阻尼比较小的结构设计更不利。     

Design of a tuned vibration absorber for a slender hollow cylindrical structure

Abstract

In this paper, details of the design work for a tuned vibration absorber to be used on a hollow cylindrical structure is presented. The vibration problem is of resonant type and the tuned vibration absorber is designed to suppress the displacement vibration response of the free end of the slender hollow structure dominated by the contribution of its lowest transverse vibration modes. The structure is modeled using a commercial finite element software. Finite element model of the structure is verified using experimentally obtained frequency response functions and modal parameters. Effective parameters of the tuned vibration absorber design are then determined based on finite element analysis simulations of the vibration suppression performance of the tuned vibration absorber as it is used on the structure. Details of the tuned vibration absorber design are determined and a prototype is fabricated. Prototype tuned vibration absorber is then characterized experimentally both as a standalone system and also as it is used on the main structure. Vibration reduction performance of the physical prototype of the tuned vibration absorber is also compared with its vibration reduction performance estimated from finite element analysis simulations so that the analysis based design process can be validated.

Communicated by Dumitru Caruntu.     

H2,CO,CH4多元爆炸性混合气体支链爆炸阻尼效应

对多元爆炸性混合气体爆炸的阻尼效应,进行了比较系统的研究,实验表明：“惰性气体”N2,CO2与水蒸汽对多元混合气体支链爆炸具有一定的抑制作用;甲烷与石油液化气对含H2易爆混合气体支链爆炸具有明显的阻尼效应．这对指导支链燃烧与支链爆炸的实践,关于工业尾气与废气的安全回收,有关爆炸性混合气体的置换技术的改进,以及工业与矿井混合气体爆炸事故的预防,具有重要的现实意义与理论价值．     

On damping coefficient due to phase transformation

The damping coefficient of capillary waves due to the evaporation-condensation process at the interface of the two phases of a fluid is evaluated. To highlight the mechanism of the effect of heat and mass transfer across the interface between regions of liquid and vapor, potential flow of incompressible fluids are assumed. Thus other mechanisms of damping are neglected. To fascilitate the analysis, the method of multiple-scale is employed in the analysis, even though the problem is linear.     

Dynamic modeling and simulation of deploying process for space solar power satellite receiver

To reveal some dynamic properties of the deploying process for the solar power satellite via an arbitrarily large phased array (SPS-ALPHA) solar receiver, the symplectic Runge-Kuttamethod is used to simulate the simplified model with the consideration of the Rayleigh damping effect. The system containing the Rayleigh damping can be separated and transformed into the equivalent nondamping system formally to insure the application condition of the symplectic Runge-Kutta method©First, the Lagrange equation with the Rayleigh damping governing the motion of the system is derived via the variational principle. Then, with some reasonable assumptions on the relations among the damping, mass, and stiffness matrices, the Rayleigh damping system is equivalently converted into the nondamping system formally, so that the symplectic Runge-Kutta method can be used to simulate the deploying process for the solar receiver. Finally, some numerical results of the symplectic Runge-Kutta method for the dynamic properties of the solar receiver are reported. The numerical results show that the proposed simplified model is valid for the deploying process for the SPS-ALPHA solar receiver, and the symplectic Runge-Kutta method can preserve the displacement constraints of the system well with excellent long-time numerical stability.     

分块法研究圆柱绕流升阻力

 使用新的分块耦合方法，分别对单圆柱和串列双圆柱绕流进行了数值 模拟. 对于单圆柱绕流，低$Re$下计算所得到的定常涡尺寸与实验非常接近. 对于 串列双圆柱绕流，研究分析了改变双圆柱中心间距对上下游圆柱的升阻力系数和脉动频率所 产生的影响，计算结果与实验非常吻合，为进一步研究涡致振动提供了依据.     

复合纤维增强混凝土阻尼测试装置开发与试验研究

纤维与聚合物的掺入可以明显改善混凝土材料的阻尼性能。本文首先给出了正弦交变激励下粘弹性材料三点弯曲梁阻尼特性关系,其次首次自主开发了大尺寸材料的阻尼性能测试装置,然后利用开发的装置在频率(0.5~2.0Hz)条件下测定了6种不同配比复合纤维增强阻尼混凝土的损耗因子与储存模量,最后对纤维的阻尼增强机理进行了初步探讨。试验结果表明:复合纤维增强阻尼混凝土与素混凝土相比,提高了混凝土的损耗因子80%~200%。主要原因是聚合物分子在外力作用下的内耗增加了普通混凝土的阻尼能力,而纤维的阻尼增强机理在于纤维的掺入增加了纤维与水泥基材的界面摩擦力。     

冲击电流计线圈运动状态的分析

简要介绍了冲击电流计的工作原理,分析研究了冲击电流计的偏转线圈在磁场中的运动状态,并运用数理方法和电磁学知识推导出描述各种运动状态的物理表达式,揭示出偏转线圈的运动规律,对于仪器的调节和实验电路的设计具有重要意义.