基于互连线电容耦合的SR锁存电路研究

通过对线间电容耦合模型的研究, 提出了一种基于互连线电容耦合的SR锁存电路设计方案. 该方案首先分析互连线间电容耦合关系, 利用MOS管栅极电容模拟互连线电容; 然后利用电容耦合结构与线计算特性, 设计或非逻辑门电路, 在此基础上实现基于互连线电容耦合的SR锁存电路; 最后在TSMC 65nm Spectre环境下仿真验证. 结果表明 所设计的电路逻辑功能正 确, 且具有低硬件开销特性.     

基于三线性分灾模型的结构多目标抗震优化设计

基于分灾抗震设计概念,发展了基于三线性分灾模型的结构多目标优化设计方法。以防屈曲支撑为分灾构件的框架结构为例,针对分灾构件设计参数,采用多目标遗传算法进行分灾结构多目标优化设计。最终得到了分灾框架结构分灾构件用量和层间位移角等重要特性的多目标优化关系,并进行了相关讨论。结果表明,结构多目标分灾优化模型可以综合考虑结构造价和抗震性能等,并可以根据目标偏好有效地满足设计需求;分灾构件对抗震性能的作用随着震级增大而增强,使用分灾构件的结构能够更好地抵御强震的作用。     

Design of a tuned vibration absorber for a slender hollow cylindrical structure

Abstract

In this paper, details of the design work for a tuned vibration absorber to be used on a hollow cylindrical structure is presented. The vibration problem is of resonant type and the tuned vibration absorber is designed to suppress the displacement vibration response of the free end of the slender hollow structure dominated by the contribution of its lowest transverse vibration modes. The structure is modeled using a commercial finite element software. Finite element model of the structure is verified using experimentally obtained frequency response functions and modal parameters. Effective parameters of the tuned vibration absorber design are then determined based on finite element analysis simulations of the vibration suppression performance of the tuned vibration absorber as it is used on the structure. Details of the tuned vibration absorber design are determined and a prototype is fabricated. Prototype tuned vibration absorber is then characterized experimentally both as a standalone system and also as it is used on the main structure. Vibration reduction performance of the physical prototype of the tuned vibration absorber is also compared with its vibration reduction performance estimated from finite element analysis simulations so that the analysis based design process can be validated.

Communicated by Dumitru Caruntu.     

大视场反射式施密特光学系统设计与检测

大视场、低成本、高性能天文望远镜是当前研究和开发的热点。基于像差平衡原理,在正入射施密特矫正板基础上推导出斜入射反射式施密特矫正板方程,针对焦距1 700 mm,成像视场角4°,波段为0.4 μm～0.9 μm,F数为4.25的光学系统,求解出施密特矫正板方程,并作为初始结构参数代入Zemax软件进一步优化。设计结果表明,在全视场范围内,该系统在奈奎斯特频率100 lp/mm处的调制传递函数MTF大于0.35,畸变小于2.5%,成像质量达到了衍射极限。优化设计后施密特矫正板与最近球面最大偏差为0.005 mm,采用特制的补偿器结合干涉仪可完成面形高精度检测。该施密特系统的设计为大视场、宽波段天文望远镜的开发提供了参考。     

Sonoelectrochemical hydrogenation of safrole: A reactor design,statistical analysis and computational fluid dynamic approach

In this work, ultrasound-assisted electrocatalytic hydrogenation (US-ECHSA) of safrole was carried out in water medium, using sacrificial anode of nickel. The ultrasonic irradiation was carried out at frequency of 20 kHz ± 500 Hz with a titanium cylindrical horn (MS 73 microtip; Ti-6AI-4V alloy; 3.0 mm diameter). The optimal conditions were analyzed by statistical experimental design (fractional factorial). The influence of the sonoelectrochemical reactor design was also investigated by using computational fluid dynamics as simulation tool. Among the five parameters studied: catalyst type, use of β-cyclodextrin as inverse phase transfer catalyst, sonoelectrochemical reactor design, ultrasound mode and the temperature of the solution, only the last three were significant. The hydrogenation product, dihydrosafrole, reached 94% yield, depending on the experimental conditions applied. Data of computational fluid dynamics showed that a wing shape tube added to the sonoelectrochemical reactor can work as a cooling apparatus, during the electrochemical process. The reactional solution temperature diminishes 14 °C when compared to the four-way-type reactor. Cooper cathode, absence of β-cyclodextrin, four-way-type reactor, ultrasound continuous mode (14 W) and absence of temperature control were the most effective reaction parameters for the safrole hydrogenation using US-ECHSA method. The proposed approach represents an important contribution for understanding the hydrodynamic behavior of sonoelectrochemical reactors designs and, consequently, for the reducing of the experimental costs inherent to the sonoelectrochemical process.     

基于自由曲面反射镜的低投射比超短焦投影物镜的光学设计

为了设计低投射比的超短焦投影物镜,本文采用自由曲面和折反式的光路结构设计了一种具有低投射比的超短焦投影物镜系统。该物镜由一个旋转对称的折射透镜组和一个自由曲面反射镜组成。采用11.938 mm的数字微镜器件(DMD)作为空间光调制器产生图像源。采用法线加权迭代优化的方法计算自由曲面。最后,分析了系统的性能。仿真结果表明:超短焦投影物镜可在580 mm的投影距离处实现3048 mm尺寸的大屏幕投影,系统的投射比低至0.19,系统的最大畸变小于0.72%。能够满足低投射比超短焦投影物镜的设计要求。该投影系统具有低投射比、低畸变、投影效果好等优点,可为超短焦投影系统的进一步发展提供有益参考。     

Controllably asymmetric beam splitting via gap-induced diffraction channel transition in dual-layer binary metagratings

In this work, we designed and studied a feasible dual-layer binary metagrating, which can realize controllable asymmetric transmission and beam splitting with nearly perfect performance. Owing to ingenious geometry configuration, only one meta-atom is required to design for the metagrating system. By simply controlling air gap between dual-layer metagratings, high-efficiency beam splitting can be well switched from asymmetric transmission to symmetric transmission. The working principle lies on gap-induced diffraction channel transition for incident waves from opposite directions. The asymmetric/symmetric transmission can work in a certain frequency band and a wide incident range. Compared with previous methods using acoustic metasurfaces, our approach has the advantages of simple design and tunable property and shows promise for applications in wavefront manipulation, noise control and one-way propagation.     

折衍混合复消色差望远物镜设计的PWC方法

将衍射结构视为折射率无限大的薄透镜,研究了衍射透镜高折射率表示的折衍混合复消色差望远物镜设计的PWC方法;设计了焦距为2000mm、相对孔径为1/15的双片型折衍混合复消色差望远物镜,并与常规三片型纯折射复消色差望远物镜进行了比较,结果表明双片型折衍混合复消色差望远物镜具有更好的二级光谱校正能力,色球差更小,因此具有更好的成像质量.     

球幕投影光学系统的设计与研究

设计了一种飞行训练使用的球幕投影仪光学系统.系统焦距为5.5mm, 相对孔径为1/4,全视场角175°,光谱范围为可见光波段,采用了3组10片的反远距型结构.与普通投影系统不同之处在于,该系统在保证大视场的前提下有效地减小了场曲对像质的影响.给出了球幕结构对场曲影响的定量分析以及较为方便的屏幕半径选择方法.因全部采用国产玻璃而同时满足了国产化的要求.     

Structural Insights into the Design of Synthetic Nanobody Libraries

Single domain antibodies from camelids, or nanobodies, are a unique class of antibody fragments with several advantageous characteristics: small monomeric size, high stability and solubility and easy tailoring for multiple applications. Nanobodies are gaining increasing acceptance as diagnostic tools and promising therapeutic agents in cancer and other diseases. While most nanobodies are obtained from immunized animals of the camelid family, a few synthetic nanobody libraries constructed in recent years have shown the capability of generating high quality nanobodies in terms of affinity and stability. Since this synthetic approach has important advantages over the use of animals, the recent advances are indeed encouraging. Here we review over a dozen synthetic nanobody libraries reported so far and discuss the different approaches followed in their construction and validation, with an emphasis on framework and hypervariable loop design as critical issues defining their potential as high-class nanobody sources.