大焦深成像系统仿真实验研究

如何增大非相干光学成像系统的焦深是应用光学研究领域的热点问题.本文对采用高次非球面光学掩模板与图像处理相结合增大成像光学系统焦深的新方法进行了深入分析,建立了大焦深成像系统仿真实验模型,并进行了大焦深成像系统仿真实验.实验结果证明了该方法在维持原相对孔径的同时使光学系统在较大的离焦范围内有好的成像质量.实际应用中还要综合考虑模板参量、信噪比等关键因素.     

Applying a Mode Selector to Improve the Pulse-Compression Performance of Asymmetric-Coupled-Waveguide-Based Dispersion Compensators

An InGaAsP slab-type asymmetric-coupled-waveguide-based dispersion compensator with a mode selector has been designed and fabricated. The mode selector is necessary to select either a symmetric [with a positive group-velocity dispersion (GVD)] or antisymmetric (with a negative GVD) supermode. These supermodes exist simultaneously in the dispersion-compensation region of the device. Pulse-compression experiments were used to test the dispersion compensator, evaluating the function of the mode selector. A theoretical study of the experimental results shows that the mode selector obtains a very strong selectivity (nearly 100%) for the antisymmetric supermode.     

Bush连续不可微函数的分形性质

本文对用递推关系确定的Bush连续不可微函数,找出了迭代函数系(IFS),从而得到它的级数表达式和所具有的自仿射分形的有关性质.最后还计算出函数图象的Hausdorff 维数的准确值.     

Lyapunov-type inequalities for nonlinear systems

In this paper, by using elementary analysis, we establish some new Lyapunov-type inequalities for nonlinear systems of differential equations, special cases of which contain the well-known equations such as Emden-Fowler-type and half-linear equations. The inequalities obtained here can be used as handy tools in the study of qualitative behaviour of solutions of the associated equations.     

Unsteady MHD flow of a non-Newtonian fluid on a porous plate

This paper deals with the study of the MHD flow of non-Newtonian fluid on a porous plate. Two exact solutions for non-torsionally generated unsteady hydromagnetic flow of an electrically conducting second order incompressible fluid bounded by an infinite non-conducting porous plate subjected to a uniform suction or blowing have been analyzed. The governing partial differential equation for the flow has been established. The mathematical analysis is presented for the hydromagnetic boundary layer flow neglecting the induced magnetic field. The effect of presence of the material constants of the second order fluid on the velocity field is discussed.     

Investigating laser rapid manufacturing for Inconel-625 components

This paper presents an investigation of laser rapid manufacturing (LRM) for Inconel-625 components. LRM is an upcoming rapid manufacturing technology, it is similar to laser cladding at process level with different end applications. In general, laser-cladding technique is used to deposit materials on the substrate either to improve the surface properties or to refurbish the worn out parts, while LRM is capable of near-net shaping the components by layer-by-layer deposition of the material directly from CAD model. In the present study, a high-power continuous wave (CW) CO₂ laser system, integrated with a co-axial powder-feeding system and a three-axis workstation were used. The effect of processing parameters during LRM of Inconel-625 was studied and the optimum set of parameters for the maximum deposition rate was established employing Orthogonal L9 array of Taguchi technique. Results indicated that the powder feed rate and the scan speed contributed about 56% and 26%, respectively to the deposition rate, while the influence of laser power was limited to 10% only. Fabricated components were subjected to non-destructive testing (like—ultrasonic testing, dye-penetrant testing), tensile testing, impact testing, metallographic examinations and micro-hardness measurement. The test results revealed defect-free material deposition with improved mechanical strength without sacrificing the ductility.     

Left, right, and inner socles of associative systems

We investigate the basic properties of the different socles that can be considered in not necessarily semiprime associative systems. Among other things, we show that the socle defined as the sum of minimal (or minimal and trivial) inner ideals is always an ideal. When trivial inner ideals are included, this inner socle contains the socles defined in terms of minimal left or right ideals. This revised version was published online in June 2006 with corrections to the Cover Date.     

数码相机原理与系统设计研究

介绍了数码相机的工作原理 ,分析了数码相机的系统结构 ,提出了设计数码相机的处理流程。典型的数码相机系统有镜头、闪光灯、光学取景器、LCD显示屏、图像数据存储扩展设备接口、图像数据传输接口、供电系统以及核心处理器等八个主要模块。数码相机的数据流向从图像传感器开始 ,止于图像数据的存储和传输。数据流的处理主要包括模数转换、光学黑电平钳位、针对镜头的边缘畸变的运算修正、坏像素处理、白平衡处理、伽马校正、色彩合成处理、边缘检测 (锐度检测 )和伪彩色检测 (伪彩色抑制 )、JPEG压缩和图像存储器等模块     

Fitting the control parameters of a genetic algorithm: An application to technical trading systems design

This paper studies the problem of how changes in the design of the genetic algorithm (GA) have an effect on the results obtained in real-life applications. In this study, focused on the application of a GA to the tuning of technical trading rules in the context of financial markets, our tentative thesis is that the GA is robust with respect to design changes. The optimization of technical trading systems is a suitable area for the application of the GA metaheuristic, as the complexity of the problem grows exponentially as new technical rules are added to the system and as the answer time is crucial when applying the system to real-time data. Up to now, most of GAs applications to this subject obviated the question of possible “design dependence” in their results. The data we report, based on our experiments, do not allow us to refute the hypothesis of robustness of the GA to design implementation, when applying to technical trading systems tuning.