Application of ultrasound-assisted acid leaching procedures for major and trace elements determination in edible seaweed by inductively coupled plasma-optical emission spectrometry

A new method using diluted reagents (nitric and hydrochloric acids and oxygen peroxide) and ultrasound energy to assist metals acid leaching with from edible seaweed was optimized. The method uses a first sonication at high temperature with hydrochloric acid as a previous stage to an ultrasound-assisted acid leaching with 7 ml of an acid solution containing nitric acid, hydrochloric acid and hydrogen peroxide at concentrations of 3.7, 3.0 and 3.0 M, respectively. Optimum conditions for the first sonication step were ultrasound energy at 17 kHz, sonication temperature at 65 °C, an acid volume of 2 ml, an hydrochloric acid concentration of 6.0 M and a sonication time of 10 min. It has been found that the first sonication stage at high temperature with hydrochloric acid is necessary to obtain quantitative recoveries for As, Ba, Fe and V. Otherwise quantitative recoveries were reached for the other elements investigated (Ca, K, Na, Mg, Cd, Cr, Cu, Mn, Ni, Pb and Zn). The repeatability of the ultrasound-assisted acid leaching method was around 10% for all elements. Adequate limit of detection and limit of quantification were reached by using inductively coupled plasma-optical emission spectrometry (ICP-OES) for measurements. The method resulted accurate after analysing several seaweed certified reference materials (IAEA-140/TM, NIES-03 and NIES-09). The method was finally applied to the multi-element determination in edible seaweed samples.     

On‐Line Determination of Arsenic Species in Sea Water by Selective Hydride Generation Coupled with Inductively Coupled Plasma — Mass Spectrometry

A method for direct de termination of total in organic arsenic (III+V), arsenic (III) and dimethylarsinate (DMA) in sea water was developed by combining continuous‐flow selective hydride generation and inductively coupled plasma mass spectrometry (ICP‐MS) is presented. The principle underlying selective hydride generation is based on proper control of the reaction conditions for achieving separation of the respective arsenic species. The effects of pH and composition of reaction media on mutual interference between the arsenic species were investigated in detail. The results indicate that the appropriate media for the selective determination of total in organic arsenic, DMA and As(III) are 6 M HNO₃, acetate buffer at pH = 4.63 and citrate buffer at pH = 6.54, respectively. The concentrations of total inorganic arsenic species, As(III+V), and As(III) were respectively deter mined and that of As(V) was obtained by the difference between them. As to the concentration of DMA, it was obtained after correction from the interference caused by As(III) and As(V). By following the established procedure, the detection lim its (as based on 3‐sigma criterion) for As(III+V), As(III) and DMA were 0.050, 0.009, and 0.002 ng/mL, respectively. There liability of the pro posed method was evaluated in terms of precision and spike addition. The results indicated that the precision of better than 3% and spike recovery of 95 to 105% for all the arsenic species tested in the natural sea water samples can be obtained.     

有机试液的电感耦合等离子体原子发射光谱分析 Ⅰ.实际应用的若干方面

本文从七个方面介绍了ICP-AES在有机试液直接分析中的应用:(1) 油类样品分析;(2) 酒样直接分析;(3) 溶剂萃取分离富集-ICP光谱分析;(4) 基于生成挥发性金属有机化合物的ICP进样方法;(5) 有机试液分析中的其它进样方法;(6) 有机介质中非金属元素的ICP-AES测定;(7) ICP-AES作为色谱法的检测器。     

Preconcentration and atomic spectrometric determination of rare earth elements (REEs) in natural water samples by inductively coupled plasma atomic emission spectrometry

The usage of a variety of sorbents has been shown as promising matrix removal/preconcentration strategies for the determination of rare earth elements (REEs) in various natural water samples by inductively coupled plasma atomic emission spectrometry (ICP-AES). The sorption efficiency of various zeolites (clinoptilolite, mordenite, zeolite Y, zeolite Beta), ion-exchangers (Amberlite CG-120, Amberlite IR-120, Rexyn 101, Dowex 50W X18) and chelating resins (Muromac, Chelex 100, Amberlite IRC-718) towards REEs was investigated in terms of solution pH, shaking time and sorbent amount. The results have shown that most of the materials can take up REEs at a wide pH range. The experiments were continued with clinoptilolite, zeolite Y and Chelex 100 and it was demonstrated that all three materials displayed very fast kinetics for REE sorption (higher than 96% in 1 min). Desorption from the sorbents was realized with 2.0 M HNO₃ for clinoptilolite and 0.1 M HNO₃ for zeolite Y and Chelex 100. Only the lower concentration range (0.01-2.0 mg l⁻¹) of matrix-matched standards were used in quantitation although the calibration graphs were linear at least up to 10.0 mg l⁻¹ for all REEs studied. The limit of detection (3 s) without preconcentration was 0.1, 1.0, and 0.2 μg l⁻¹ for Eu, La, and Yb, respectively. The validity of the method with the selected sorbents was checked through spike recovery experiments.     

基于化学计量学结合ICP-MS的党参道地性的研究及安全评价

微量元素与中药的功效和安全性密切相关,也是药材道地性研究的一部分,为探讨党参中重金属元素的安全性、风险性及道地性的相关性。本文采用电感耦合等离子体质谱法（ICP-MS）及原子荧光光谱法(AFS)测定来源于甘肃、山西、湖北、四川等产区的39批党参药材中的20种元素的含量,结果结合化学计量学分析对党参产区进行差异判别。通过单因子污染指数法和内梅罗综合污染指数法对其进行安全性评价,通过健康风险基于暴露量、危害指数法和暴露限值法对其进行风险评估。结果表明,重金属在各自范围内线性关系良好,加样回收率,仪器精密度和重复性良好,其中 Ba、Sr、Mn的含量最高。主成分分析显示39批药材分为三类,同一产区的党参能较好的聚在一起,元素含量差异与产区分布有一定规律,其中Cs、Ga、As、Co、Li、Pb、Hg、Se、V、Mn为关键的差异标志物,为产地元素特征分析鉴别提供依据。安全评价结果为39批党参药材污染等级为安全,但风险评估后DS-31、DS-32、DS-34、DS-36及 DS-37在人体长期蓄积中具有健康风险。结论：本研究方法高效、准确、简便,结合化学计量学可以对党参进行有效的产地判别,评价党参中元素的安全性及风险性,为党参道地性及健康评价提供了科学依据。     

锗元素测定方法综述

锗在国防工业、航空航天和通信等领域中的战略性,锗含量的测定对于保证材料质量和满足国际标准至关重要。本文综述了锗含量测定方法的多种技术,包括分光光度法、原子荧光光谱法、原子吸收光谱法、电感耦合等离子体原子发射光谱法、电感耦合等离子体质谱法以及滴定法。在每个检测方法的介绍中,详细探讨了方法的原理、前处理步骤以及应用范围,并分别总结了各个方法的优势和不足。最后,强调了锗含量测定方法的意义,特别是在满足出口监管和促进科学研究方面的作用。同时对锗元素的测定方法进行了展望,为未来的发展提供了参考方向。     

动能歧视(KED)-电感耦合等离子体质谱(ICP-MS)法测定贵州沉积型稀土矿中16种稀土元素

贵州沉积型稀土矿主要含有高岭土-锐钛矿石等矿物,存在高含量Si、Al、Fe、Ti、Zr等难溶基体元素,采用高压密闭微波消解法处理难以将其完全溶解,易使测定结果偏低,需再次消解或进一步电热板敞开酸溶处理,方法耗时长,不利于大批量样品检测需求。同时电感耦合等离子体质谱法(ICP-MS)在测定稀土元素时存在基体效应和质谱干扰,影响了检测数据的准确性。本文采用过氧化钠熔融分解样品,熔融物冷却后引入三乙醇胺溶液,在碱性溶液中,大量基体元素与三乙醇胺形成稳定配合物,并与大量溶剂钠盐存于溶液中,稀土元素与Ca、Mg、Sr、Ba等留存于沉淀,经过滤,实现稀土元素与大量基体元素分离,随后沉淀用(1+1)硝酸复溶,并以103Rh和185Re为在线注入内标协同降低基体干扰;启用动能歧视(KED)模式以降低测定过程中潜在的质谱干扰。实验结果表明:高压密闭微波消解法消解液浑浊有残渣,溶矿耗时长,测试结果偏低,碱溶法酸化后溶液清亮透明,稀土元素测定值准确性高;经条件试验,采用10%三乙醇胺溶液提取能较大降低基体干扰;启用KED模式可降低测定过程中的质谱干扰,且准确度优于STD模式;碱溶法方法检出限为0.008μg/g~0.049μg/g,测定下限为0.034μg/g~0.195μg/g,相对标准偏差RSD在0.78%～10.2%之间,相对误差RE在0.0225%~13.5%之间。经实际样品验证,碱熔法较适用于贵州沉积性稀土矿中16种稀土元素的测定。     

One- and Two-Mode Combination Squeezing Operator for Two Harmonic Oscillators with Coordinate-Momentum Coupling

By virtue of the technique of integration within an ordered product of operators, we derive the normal ordering expansion of a one- and two-mode combination squeezing operator for two harmonic oscillators with coordinatemomentum coupling. It turns out that this squeezing operator just diagonalizes the Hamiltonian H = p21/2m1 m1ω21x21/2 p22/2m2 m2ω22x22/2 - λx2p1, so its ground state is a one- and two-mode combination squeezed state.Quantum fluctuation in the ground state is calculated.     

高频感应等离子体流动模型与微型电推进器流场特性分析

微型射频离子推力器具有结构简单、 工作寿命长、 推力动态范围大、 性能调节响应灵敏等特点,是国际微电推进领域的研究热点之一.射频离子推力器电离室内的感性耦合放电等离子体特性和推力器的性能密切相关.为此,文章建立了低气压、小尺寸微型射频离子推力器电离室内感性耦合等离子体流体模型,开展了电磁场、流场、化学反应浓度场的多物理...