Chemical Preparation,Thermal Behavior,Kinetic, and IR Studies of MnK4(P3O9)2.2H2O,Crystallographic Data of a New Cyclotriphosphate MnK4(P3O9)2, and Quantum Chemical Calculations for the P3O3− 9 Ion

Abstract

Chemical presparation, thermal behavior, and infrared (IR) studies are discussed for the cyclotriphosphate MnK₄(P₃O₉)₂.2H₂O and its anhydrous form MnK₄(P₃O₉)₂. The total dehydration of MnK₄(P₃O₉)₂.2H₂O, between 200 and 550 °C, leads to its anhydrous form MnK₄(P₃O₉)₂. MnK₄(P₃O₉)₂ is a new cyclotriphosphate crystallizing in the rhombohedral system and is stable until its melting point at 560 °C. The thermal behavior of MnK₄(P₃O₉)₂.2H₂O has been investigated and interpreted by comparison with IR absorption spectrometry and X-ray diffraction experiments. Two different methods, Ozawa and KAS (Kissinger-Akahira-Sunose), were selected in studying the kinetics of thermal behavior of the title compound. Quantum chemical calculations were made for the P₃O ^3? ₉ ion.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.

GRAPHICAL ABSTRACT     

Highly improved crystallization behavior of poly(L‐lactide) induced by a novel nucleating agent: substituted‐aryl phosphate salts

In this work, a novel nucleating agent (NA) based on substituted‐aryl phosphate salts was introduced into poly(L‐Lactide) (PLLA). The nonisothermal and isothermal crystallization behaviors of nucleated PLLA samples were investigated through differential scanning calorimetry (DSC), wide angle X‐ray diffraction, and polarized optical microscope (POM). Furthermore, the effect of annealing treatment on the cold crystallization behaviors of nucleated samples was also investigated. The results show that the crystallization of PLLA, whether for the melt crystallization (including nonisothermal and isothermal crystallization process) or for the cold crystallization (including the cold crystallization occurring during the DSC heating process and during the annealing process), is greatly dependent upon the content of NA. At relatively lower NA content (≤0.1 wt%), the nucleation effect of NA is inconspicuous, however, at higher NA content (≥0.2 wt%), it exhibits great nucleation effect for the crystallization of PLLA. Further results show that the double endothermic peak of PLLA depends on the temperature applied for the crystallization. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis,polymerization, and thermal properties of benzoxazine based on bisphenol‐S and allylamine

A bifunctional benzoxazine monomer, 6,6′‐bis(3‐allyl‐3,4‐dihydro‐2H‐benzo[e][1,3]oxazinyl) sulfone (BS‐ala), was synthesized from bisphenol‐S, allylamine and formaldehyde via a solution method. The chemical structure of BS‐ala was confirmed by ¹H and ¹³C nuclear magnetic resonance (NMR) spectroscopy, Fourier transform infrared (FTIR) spectroscopy, and elemental analysis. The polymerization behavior of BS‐ala was investigated by FTIR, solid‐state ¹³C NMR, and differential scanning calorimetry (DSC). The oxazine ring opening polymerization is prior to the addition polymerization of allyl group, and the exothermic peaks corresponding to the two reactions appear partially overlapped in the DSC curve. The storage modulus of the resultant polybenzoxazine at 25°C is about 3.9 GPa, and the glass transition temperature is 254°C. The 5% and 10% weight loss temperatures of the polybenzoxazine are about 335°C and 361°C in both air and nitrogen, respectively. The char yield is about 58% at 800°C in nitrogen, whereas almost no residue is remained at 700°C in air. Copyright © 2012 John Wiley & Sons, Ltd.     

Effect of cholesteric liquid crystalline elastomer with binaphthalene crosslinkings on thermal and optical properties of a liquid crystal that show smectic A‐cholesteric phase transition

A side‐chain polysiloxane cholesteric liquid crystalline elastomer (ChLCE) with binaphthalene derivate as crosslinkings and cholesterol derivate as liquid crystalline monomers was designed and synthesized. A binaphthyl chiral dopant (CD) was synthesized as well. The chemical structures and liquid crystalline properties of the ChLCE and the CD were characterized by Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, element analyses, differential scanning calorimetry and polarizing optical microscopy measurements. The helical twisting power of the ChLCE exhibited a turning point with changing temperature and was smaller than that of the CD. In addition, the effect of the ChLCE on phase transition temperatures and thermal‐optical properties of a liquid crystal that show smectic A (SmA)‐cholesteric (Ch) phase transition was studied. Worthily, the testing of the reflection wavelength with changing temperature suggested that the adding of the ChLCE in liquid crystals that show SmA‐Ch phase transition can expedite their SmA‐Ch transition. In addition, the network structure of the ChLCE may play a significant role in the accelerating of the transition. These properties provided theoretical and experimental foundations for applying ChLCE in thermally sensitive liquid crystal devices requiring fast response, such as thermally controllable windows, materials and displays. Copyright © 2012 John Wiley & Sons, Ltd.     

Polymers Derived from 4-Substituted Salicylic Acids as Antifungal Agents

4-Amino-, chloro-, and bromo-substituted salicylic acid-formaldehyde polymers and their metal chelates were screened for their antifungal activity. Various copolymers prepared from 4-chloro-(bromo)salicylic acid, formaldehyde, and other comonomers were also screened for their antifungal activity. All these polymers, copolymers, and polychelates were found active against several fungi Their fungicidal activities are compared with those of the corresponding monomers and monomeric chelates.     

Effect of Mineral Salts on Steady Rheological Properties of Nonionic Hydrophobically Modified Polyacrylamide and Its Stress-Relaxation Behavior

A micelle-forming polymerizable surfactant monomer, octylphenol polyoxyethylene acrylate (OP-10-AC), was synthesized, and then OP-10-AC was copolymerized with acrylamide (AM) to form nonionic hydrophobically modified polyacrylamide P(AM/OP-10-AC) through micellar copolymerization. In the absence of surfactants, it was investigated in detail that the effect of mineral salts and temperature on steady rheological properties of P(AM/OP-10-AC) solutions and the effect of concentrations on reduced viscosity of P(AM/OP-10-AC) in a dilute solution. The results indicate that concentrations of the copolymer, mineral salts and temperature had a strong influence on shear viscosity of P(AM/OP-10-AC) solutions, and the trend of reduced viscosity of P(AM/OP-10-AC) solutions was distinctly different from polyacrylamide with increasing concentrations of testing solutions. In addition, it was also investigated that stress-relaxation behavior of an aqueous solution of P(AM/OP-10-AC)/KCl. As a result, a stress-relaxation model of the copolymer solutions was proposed, which can further verify the correctness of the conclusion on stress-relaxation behavior of hydrophobic association hydrogels in the paper reported previously.     

Mechanical,Thermal and Morphological Behaviors of Castor Oil Based PU/PS Interpenetrating Polymer Network-Metakaolin Composites

The meta kaolin (MK) clay particulate filler with different weight ratios viz., 0, 5, 10, 20 and 30 wt% were incorporated into castable polyurethane (PU)/polystyrene (PS) (90/10) interpenetrating polymer network (IPN). The effects of MK particulate filler loading on the mechanical and thermal properties of PU/PS (90/10) IPN composites have been studied. From the tensile behavior, it was noticed that a significant improvement in tensile strength and tensile modulus as an increase in MK filler content. Thermogravimetric analysis (TGA) data reveals the marginal improvement in thermal stability after incorporation of MK filler. TGA studies of the IPN composites have been performed in order to establish the thermal stability and their mode of thermal degradation. It was found that degradation of all composites takes place in two steps. Degradation kinetic parameters were obtained for the composites using three mathematical models. Tensile fractured composite specimens were used to analyze the morphology of the composites by scanning electron microscopic (SEM) technique.     

Polyurethane Ionomers from Cycloaliphatic Diisocyanate and Polytetramethylene Glycol

Abstract

Segmented polyurethane (PU) ionomers were prepared from cycloaliphatic diisocyanate [methylene bis(4-cyclohexyl isocyanate) (H₁₂MDI) and isophoron diisocyanate (IPDI)] and polytetramethylene glycol (PTMG) by using an anionic-type chain extender, viz., dimethylol propionic acid (DMPA). The effect of ionic content and butanediol (BD) on the state of dispersion and physical properties of emulsion-cast film was determined using Autosizer, transmission electron microscopy (TEM), Instron, and Rheovibron. With increased incorporations of DMPA in PU, particle size of emulsion decreased asymptotically, tensile modulus and strength increased, and the glass transition temperature (T _g) moved toward the higher temperature. On the other hand, with increased incorporation of BD in PU, particle size of emulsion, tensile modulus, and strength of the emulsion cast film increased, and the major transition of soft segment moved toward higher temperature. With regard to the structural effect of the isocyanate, H₁₂MDI gave finer dispersion and better mechanical properties over IPDI.     

Large‐scale Experimental Study on the Effects of Flooring Materials on Combustion Behavior of Thermoplastics

The effects of flooring materials on the combustion behavior of thermoplastics is investigated. Based on the ISO 9705 fire test setup, an experimental rig was designed. Full‐scale experiments of PP combustion were carried out using five flooring boards, namely gypsum, steel, wood, ceramic tile and PVC. The experimental results indicate that the flooring boards play an important role in the heat release rates of typical thermoplastics combustion. Specifically, the time for the sharp increase of heat release rate is generally later for the flooring boards with larger thermal conductivity, except for the case of PVC. Preliminary analyses suggest that the reason for the exception of PVC is the expansion and carbonization of PVC at high temperature. In addition, experimental results also show that the corresponding peak heat release rate of thermoplastics combustion would be generally smaller for the flooring board with a larger thermal mass, except for the case of gypsum. The primary cause for the exception of gypsum may be the heat absorption by the crystal water released from the gypsum during the burning of hot pool oil.