Treatment by serum up-conversion nanoparticles in the fluoride matrix changes the mechanism of cell death and the elasticity of the membrane

Nanoparticles are increasingly being used for treatment and diagnostic purposes, but their effects on cells is not fully understood. Here, the interaction of fluorescent up-conversion nanoparticles (UpC-NPs) with neutrophils was investigated by imaging and measurement of membrane-cytosceletal elasticity by atomic force microscopy. It was found that UpC-NPs induce the death of neutrophils mainly by necrosis, and to a smaller extent by a novel process called ‘mummification'. Necrosis occurs by gradual loss of intracellular contents and nuclei, 45–110 min after exposure to UpC-NPs. Mummification is apparent as an increase in the rigidity of the neutrophils' membrane and acquisition of a characteristic bumpy shape with numerous protrusions; this structure does not change during atomic force microscopy scanning. Coating UpC-NPs with protein by incubation with serum leads to (1) formation of nanoparticle aggregates in the nm and μm size range, (2) a reduction in toxicity, (3) reduced mummification of neutrophils, and (4) no significant reduction of the elasticity of the membrane-cytoskeletal complex of neutrophils 30 min after exposure to coated UpC-NPs. The study shows that serum proteins greatly curb the toxicity of nanoparticles and reveals mummification as a novel mechanism of UpC-NP-induced cell death.     

Approximation by walsh-kaczmarz-fejér means on the hardy space

The main aim of this paper is to find necessary and sufficient conditions for the convergence of Walsh-Kaczmarz-Fejér means in the terms of the modulus of continuity on the Hardy spaces H_p, when 0<p≤ 1/2.     

On finiteness and continuity of shot noise processes

For a rather general class of stochastic processes induced by time-stationary and by event-stationary random marked point processes, respectively, conditions are given for the almost sure finiteness of these processes and for their continuous dependence on the underlying random marked point process.     

On an Inequality of Pual Turan Concerning Polynomials-Ⅱ

Let P(z) be a polynomial of degree n and for any complex number α, let D_αP(z) = nP(z)+(α- z) P′(z) denote the polar derivative of the polynomial P(z) with respect to α. In this paper, we obtain inequalities for the polar derivative of a polynomial having all zeros inside a circle. Our results shall generalize and sharpen some well-known results of Turan, Govil, Dewan et al. and others.     

The construction and approximation of feedforward neural network with hyp erb olic tangent function

In this paper, we discuss some analytic properties of hyperbolic tangent function and estimate some approximation errors of neural network operators with the hyperbolic tangent activation functionFirstly, an equation of partitions of unity for the hyperbolic tangent function is givenThen, two kinds of quasi-interpolation type neural network operators are constructed to approximate univariate and bivariate functions, respectivelyAlso, the errors of the approximation are estimated by means of the modulus of continuity of functionMoreover, for approximated functions with high order derivatives, the approximation errors of the constructed operators are estimated.     

Novel Methods for Obtaining High Modulus Aliphatic Polyamide Fibers

Super high modulus polyethylene fibers can be created by converting high molecular weight flexible PE chains into highly oriented and extended chain conformations. However, unlike polyethylene, aliphatic polyamides have very high cohesive energy and therefore cannot be easily drawn and highly oriented. This review addresses this fundamental problem by analyzing various novel approaches that can be used to suppress hydrogen bonding in these types of polyamides. Plasticization of such polymers with ammonia, iodine, salts, and Lewis acids, as well as dry spinning, wet spinning, and gel spinning, are discussed. Specialized techniques that involve vibrational zone drawing and annealing as well as laser heating zone drawing and annealing are also reviewed. Some of these methods definitely lead to remarkable improvements in initial modulus and other mechanical properties. The development of recombinant spider silk proteins as well progress in spinning these materials is also reported. The advantages and disadvantages of all of these processes are then summarized.     

Investigation of Viscoelastic Properties of Amorphous Selenium near Glass Transition Using Depth‐Sensing Indentation

Abstract

New procedures involving depth‐sensing indentation are used to measure the submicron scale elastic modulus, hardness, viscosity, and activation energy and volume for creep of amorphous selenium below glass transition. The accurate measurement of Young's modulus in a highly viscoelastic situation using depth‐sensing indentation remains a challenge, and a creep correction procedure is employed here to measure the modulus. The measured Young's modulus exhibits a strong decreasing trend from ～10 GPa to 4.4 GPa as temperature increases from ～302 K to 309 K, in reasonably good agreement with bulk behavior. Two new procedures are also proposed here to measure the viscosity. The measured shear viscosity decreases from ～1×10¹² Pa‐s to ～2×10¹⁰ Pa‐s when the temperature increases over the same range, and the variation with temperature is found to obey an Arrehnius rate equation. The activation energy for the viscous creep process is found to be ～463 kJ/mol. Both the viscosity and the activation energy are lower than the bulk values, and this is thought to be due to the much higher stress levels of over 200 MPa involved in the nanoindentation experiments here. The apparent activation volume exhibits a rising trend from 1.04×10^?31 to 2.35×10^?30 m³ over the same temperature range.     

Effect of Octadecanol on the Interfacial Dilational Properties of Surfactant/Polymer Systems

The effect of octadecanol on dilational properties of 4,5-diheptyl-2-propylbenzene sulfonate and partly hydrolyzed polyacrylamide at the decane-water interface has been examined by means of longitudinal method. The octadecanol plays different roles in influencing the structure of adsorbed layers at different bulk concentration. A small quantity of octadecanol may enhance the dilational modulus by forming densely packed mixed-adsorption layer with surfactant molecules through hydrophobic interaction, which leads to the increase of dilational modulus. However, due to the weakening of the “entanglement” among long alkyl chains in surfactant molecules by the intercalation of octadecanol, the superfluous addition of octadecanol could decrease the dilational modulus. In the case of polymer/octadecanol system, the addition of the polymer may enhance the dilational modulus due to the slow diffusion-exchange process of the polymer.     

Effect of Demulsifiers on Dilatational Properties of Crude Oil–Water Interfaces

The dilatational properties of polyether demulsifiers PEA, PEB, PEC, PED, PEF, and PEG at the decane-water interface were investigated. Meanwhile, the effect of demulsifiers with different structures on interfacial dilatational modulus of diluted crude oil also was explored. The properties of demulsifiers are compared and analyzed in combine with the dilatational parameters at decane-water interface and at 5% crude oil-water interface. The results show that interfacial dilatational viscoelasticity could characterize the interfacial behavior of demulsifiers. The demulsifiers, which have different kinds or structures, have different effects on destroying the interfacial film of crude oil with increasing bulk concentration. Therefore, the dosage of demulsifier is a very important role in controlling nature of crude oil film.     

Skin Constituents as Cosmetic Ingredients. Part II: A Study of Bio‐Mimetic Monoglycerides Behavior at the Squalene‐Water Interface by the “Pendant Drop” Method in a Dynamic Mode

This work aims at presenting the viscoelastic behavior of bio‐mimetic monoglycerides used as emulsifier in a mixture made of two non‐miscible liquids, squalene and water. The measurement of the interfacial tension, carried out by the “pendant drop” method in “dynamic” mode, made it possible to characterize these amphiphilic molecules according to the value of their elastic modulus, ?, as well as their relaxation time, τ_R.

The analysis of these parameters, as well as those developed in the previous publication [L. Blasco et al. (2006) Skin constituents as cosmetic ingredients. Part I: A Study of bio‐mimetic monoglyceride behavior at the squalene‐water interface by the “pendant drop” method in a static mode. J. Dispers. Sci. Technol., 27(6).] shows that the hydrocarbon chain structure, such as its length, the presence of one or more unsaturations, hydroxyl function, affects the behavior of surfactant molecules at the squalene/water interface.