Study of the Crystallization of an Aromatic Poly-ether-ketone (PK99) by Calorimetric and X-ray Analysis

An analysis of the crystallization behaviour of a new poly(aryl-ether-ether-ketone-ketone), PK99, by differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXD) is presented. Isothermal crystallization TG were obtained in the whole range between the glass transition temperature (T _g) and the melting temperature (T _m) as a consequence of the slow crystallization kinetics stemming from the closeness of these transitions. The calorimetric results, compared with WAXD data, were applied to determine the theoretical melting temperature and crystallization enthalpy. The DSC and WAXD data were combined in order to calculate the total amount of the crystallizable fraction of the polymer, and a model was proposed to explain the difference between the fractions of crystallinity observed with these techniques. The thermal and X-ray data were also correlated with different lamellar morphologies arising from the crystallization conditions. Finally, DSC experiments on the crystallized sample were used to detect the presence of a rigid amorphous phase which does not relax at T _g. This revised version was published online in July 2006 with corrections to the Cover Date.     

Detection of banned meat and bone meal in feedstuffs by near-infrared microscopic analysis of the dense sediment fraction

In this paper we present an alternative method for detection of meat and bone meal (MBM) in feedstuffs by near-infrared microscopic (NIRM) analysis of the particles in the sediment fraction (dense fraction (d >1.62) from dichloroethylene) of compound feeds. To apply this method the particles of the sediment fraction are spread on a sample holder and presented to the NIR microscope. By using the pointer of the microscope the infrared beam is focussed on each particle and the NIR spectrum (1112–2500 nm) is collected. This method can be used to detect the presence of MBM at concentrations as low as 0.05% mass fraction. When results from the NIRM method were compared with the classical microscopic method, a coefficient of determination (R²) of 0.87 was obtained. The results of this study demonstrated that this method could be proposed as a complementary tool for the detection of banned MBM in feedstuffs by reinforcement of the monitoring of feeds.     

Melt-crystallization, glass transition and morphology of a (R)-3-hydroxybutyrate pentamer

The melt-crystallization of an oligo[(R)-3-hydroxybutyrate] with five repeating units has been analyzed using standard and temperature-modulated calorimetry, optical microscopy, and atomic force microscopy. Specimens of different crystallinity and supermolecular structure were generated by variation of the rate of cooling of a quiescent melt, or by variation of the temperature of isothermal crystallization. Completely amorphous samples can be obtained by cooling of the melt at a rate of 40 K min⁻¹, or faster, to a temperature lower than the glass transition. The crystallinity depends on the crystallization temperature. The maximum enthalpy-based crystallinity of about 40-45% is obtained by crystallization at temperatures lower than the temperature of the maximum crystallization rate, which is between 310 and 320 K. Analysis of the apparent heat capacity in metastable structural equilibrium reveals reversible melting at temperatures between 320 and 370 K by observation of an excess heat capacity above the level of the vibrational heat capacity, i.e., in the temperature range of irreversible reorganization and melting. The reversible melting is discussed in the context of coupling of the crystalline and amorphous phases, and compared to earlier studies on oligoethylene and oligo(oxyethylene). The presence of crystals causes formation of a rigid amorphous fraction of about 30% at a crystallinity of 40%. Optical and atomic force microscopy reveal spherulitic crystallization. At relatively high crystallization temperature, and in the early stage of the crystallization process, dendrites are observed which finally yield spherulites of decreased perfection. Larger spherulites of higher perfection grow at relatively low crystallization temperature, as deduced from the appearance of the Maltese cross, and the regularity of banding. The band spacing is less than 5 μm, as is accurately determined by atomic force microscopy. The temperature dependence of the spherulitic growth rate is in accord with the calorimetric analysis of the crystallization rate.     

Brownian motion of nonlinear oscillators: The projection operator method and its application to a double-well-potential oscillator

A projection operator method is presented, which provides the most efficient way for calculating the stationary behavior of nonlinear Brownian motion. A continued-fraction expansion of the Fourier-Laplace transform of the displacement correlation function or the spectral density is used. This method utilizes a successive optimization procedure on the nonlinear terms and includes the method of statistical linearization as the lowest order approximation. A systematic way to calculate the continued fraction numerically up to sufficient order for convergence is developed, which enables us to obtain the spectral density of a system previously uncomputable.Numerical computations of the spectral density of a nonlinear oscillator with a double-well potential are presented and compared with the results obtained by statistical linearization.This work was supported in part by the National Science Foundation under Grant CHE 75-20624.     

An investigation of heparinase immobilization

A systematic investigation of the parameters that affect the efficiency of immobilizing heparinase onto cyanogen bromide activated crosslinked 8% agarose beads was conducted. Two experimental measures, the “fraction bound” and the “fraction retained,” were used to monitor the coupling efficiency. The fraction bound is the portion of the total initial enzyme that is bound to the agarose gel. The fraction retained is the fraction of bound enzyme that is active. The product of the two measures indicates the coupling efficiency. The activity of the immobilized heparinase was measured under conditions free of both internal and external mass transfer limitations, and thus, the fraction retained represents the true immobilized enzyme activity. Increasing the degree of activation of the beads results in an increase in the fraction bound, the fraction retained, and consequently, the coupling efficiency. As the ratio of enzyme solution to gel volume increases from 1.5 to 2.2, the fraction bound remains constant but the fraction retained decreases (heparinase concentration; 0.15 mg/mL and degree of activation; 9.5 μmol of cyanate esters/g of gel). At volume ratios greater than 2.2, both the fraction bound and the fraction retained decline continuously. Changing the heparinase concentration in the coupling solution changes the coupling efficiency in a manner similar to that of the volume ratio change. When heparin is added during the coupling process, the fraction bound declines as the heparin concentration increases, whereas the fraction retained increases up to a heparin concentration of 12 mg/mL and decreases thereafter. When arginine, lysine, and glycine are used to block the unreacted cyanate ester groups after the coupling process, the immobilized heparinase shows different pH optima of 6.5, 6.9, and 7.2, respectively. Based upon these findings, a protocol to optimize heparinase immobilization is developed.     

Investigation of the rigid amorphous fraction in Nylon-6

A three-phase model, comprising crystalline, mobile amorphous, and rigid amorphous fractions (χ _c, χ _MA, χ _RA, respectively) has been applied in the study of semicrystalline Nylon-6. The samples studied were Nylon-6 alpha phase prepared by subsequent annealing of a parent sample slowly cooled from the melt. The treated samples were annealed at 110°C, then briefly heated to 136°C, then re-annealed at 110°C. Temperature-modulated differential scanning calorimetry (TMDSC) measurements allow the devitrification of the rigid amorphous fraction to be examined. We observe a lower endotherm, termed the ‘annealing’ peak in the non-reversing heat flow after annealing at 110°C. By brief heating above this lower endotherm and immediately quenching in LN₂-cooled glass beads, the glass transition temperature and χ _RA decrease substantially, χ _MA increases, and the annealing peak disappears. The annealing peak corresponds to the point at which partial de-vitrification of the rigid amorphous fraction (RAF) occurs. Re-annealing at 110°C causes the glass transition and χ _RA to increase, and χ _MA to decrease. None of these treatments affected the measured degree of crystallinity, but it cannot be excluded that crystal reorganization or recrystallization may also occur at the annealing peak, contributing to the de-vitrification of the rigid amorphous fraction. Using a combined approach of thermal analysis with wide and small angle X-ray scattering, we analyze the location of the rigid amorphous and mobile amorphous fractions within the context of the Heterogeneous and Homogeneous Stack Models. Results show the homogeneous stack model is the correct one for Nylon-6. The cooperativity length (ξ_A) increases with a decrease of rigid amorphous fraction, or, increase of the mobile amorphous fraction. Devitrification of some of the RAF leads to the broadening of the glass transition region and shift of T _g.     

液态金属熔池中气泡-液体两相湍流的数值模拟研究

应用欧拉-欧拉双流体模型,以及分别描述气泡和液体湍流的两相湍流模型,描述液态金属中气体射流发泡过程的两相流动及气泡分布。与实验结果的对比表明,本模型的预测能力优于前人未考虑气相湍流的模型。考查了液体物性和气泡尺寸对流场特性的影响,结果发现,液体密度越低,气泡尺寸越小,气泡分布就越均匀。     

Surface Tension of Ternary Liquid Mixtures

Abstract

Surface tension has been measured by the differential capillary rise method for three ternary mixtures containing alkanes (hexane + cyclohexane+benzene, pentane + hexane + benzene and cyclohexane + heptane + toluene at 298.15\pm 0.1°K). The sign and magnitude of the excess surface tension and excess volume depend ultimately upon the chain length of the component of the mixtures. The results of the surface tension were compared with theoretical values obtained from Flory theory, Sanchez method, Brock-Bird relation and volume fraction statistics. There is reasonable agreement between theory and experiment.     

Significance of Photosensitized Oxidation of Alkanes During the Photochemical Degradation of Petroleum Hydrocarbon Fractions in Seawater

Abstract

A crude oil hydrocarbon fraction was photooxidized as a surface film on seawater under simulated environmental conditions. After irradiation, gas chromatography and gas chromatography/mass spectrometry analyses allowed to demonstrate the presence of relatively high quantities of compounds deriving from the photosensitized oxidation of n-alkanes, pristane and phytane, being among the non-acidic photoproducts of this fraction. The results suggest that the photochemical degradation of alkanes should be considered in studies of the fate of petroleum crudes in the marine environment.     

Increased Flexibility in Multicolumn Chromatography (MC[sbnd]HPLC) via On-line Effluent Mixing Technique

Abstract

In continuation of our work dealing with multicolumn HPLC (MC[sbnd]HPLC) we describe in this paper an on-line on-column fraction trapping technique based on effluent mixing.

To a normal two-column switching set-up (in this case with two RP columns) an additional high-pressure pump gets inserted into the connection line between column A and column B via a low dead volume mixing tee. The in-line respectively off-line switching of pump B and the mobile phase B is time controlled by using a high pressure switching valve. With this set-up it is possible to mix on-line an effluent fraction from column A and transferred onto column B with a highly polar and pH-controlled (e.g. aqueous buffer) new effluent, to reduce or adjust significantly the overall elution strength of this mixed transferred solvent. Thus, several chromatographically effective possibilities can be created in a simple manner, which are for example: (a) pronounced peak compression respectively on-column concentration on column B; (b) due to low elution strength and/or pH adjustment during the trapping period on column B, increments to the overall selectivity of the column switching set-up can be added creating multidimensionality via mobile phase switching; (c) combining the heart cut with the effluent mixing technique enables analysis of trace peaks eluted on the back flank of an overloaded main peak.