Microwave assisted low temperature synthesis of sodium zirconium phosphate (NaZr<Subscript>2</Subscript>P<Subscript>3</Subscript>O<Subscript>12</Subscript>)

Sodium zirconium phosphate [NaZr₂P₃O₁₂], a potential ceramic matrix for fixation of high level nuclear waste, was synthesized by heating the mixture of sodium carbonate [Na₂CO₃], zirconyl nitrate hydrate [ZrO(NO₃)₂·5H₂O] and ammonium dihydrogen phosphate [NH₄H₂PO₄] in air, in a resistance heated furnace and a microwave heating system respectively in the temperature range 450 to 650°C. The mixture heated for 1 h in a resistance furnace at 450°C yielded a poorly crystalline NaZr₂P₃O₁₂ [NZP]. Increasing the temperature to 650°C produced a highly crystalline product. The same mixture heated in a microwave oven at 450°C for 1 h however, yielded the most crystalline NZP.In an alternate method, the mixture of sodium dihydrogen phosphate (NaH₂PO₄), zirconium dioxide (ZrO₂) and diammonium hydrogen phosphate [(NH₄)₂HPO₄] heated in resistance furnace at 650°C for the same period did not react in air. It also did not yield the pure product at 450°C when heated in microwave assembly for 1 h.The authors thank the Board of Research in Nuclear Sciences (BRNS) of the Department of Atomic Energy (DAE) for the financial support for this work under the project No. 2000/37/19/BRNS/1959 dtd09-02-02.     

一种新型双亚胺吡啶铁系催化剂的乙烯低聚研究

线性α 烯烃广泛地应用于洗涤剂、增塑剂、润滑油等精细化学品的合成以及作为共单体制备线性低密度聚乙烯 (ＬＬＤＰＥ) .目前工业上主要是应用ＳＨＯＰ法[1] 、Ｃｈｅｖｒｏｎ工艺和Ａｍｏｃｏ工艺[2 ] 通过乙烯低聚制备 .近些年发展起来的新型高活性后过渡金属乙烯低聚催化剂能够高选择性地制备线性α 烯烃[3 ,4] .Ｂｒｏｏｋｈａｒｔ等[4] 的研究表明 ,对于双亚胺吡啶铁系乙烯聚合催化剂而言 ,配体上苯基的邻位取代基位阻减小可以实现乙烯低聚 ,并具有高活性、高选择性以及理想的低聚产物分布 .本文的工作是从配体的空间位阻效应对催化剂…     

8-羟基喹啉-硅胶介质的合成及其在海水中痕量铅检测的应用

详细研究了以大孔硅胶为基质,一步合成8羟-基喹啉(8-HQ)型金属螯合色谱填料的方法,采用正交试验对合成方法进行了优化。与传统合成方法所得的填料进行了比较,从理化指标等方面来看,新的合成方法为佳。将该法用作微柱流动注射(FIA)在线分离、富集和电感耦合等离子体质谱(ICP-MS)分析流程中的固定相,对大洋海水中的痕量铅进行了在线分析,得到了较满意的结果。     

A Review on the Potential and Limitations of Recyclable Thermosets for Structural Applications

Abstract

The outstanding performance of conventional thermosets arising from their covalently cross-linked networks directly results in a limited recyclability. The available commercial or close-to-commercial techniques facing this challenge can be divided into mechanical, thermal, and chemical processing. However, these methods typically require a high energy input and do not take the recycling of the thermoset matrix itself into account. Rather, they focus on retrieving the more valuable fibers, fillers, or substrates. To increase the circularity of thermoset products, many academic studies report potential solutions which require a reduced energy input by using degradable linkages or dynamic covalent bonds. However, the majority of these studies have limited potential for industrial implementation. This review aims to bridge the gap between the industrial and academic developments by focusing on those which are most relevant from a technological, sustainable and economic point of view. An overview is given of currently used approaches for the recycling of thermoset materials, the development of novel inherently recyclable thermosets and examples of possible applications that could reach the market in the near future.     

Thioacetylacetone: structural and vibrational assignments.

Thioacetylacetone and its variously deuterated isotopomers have been investigated using electronic and vibrational spectroscopy combined with quantum chemical calculations. Thioacetylacetone is known for its photochromic properties, but the structures of the initial and final forms have been the subject of a long debate. Analysis of the IR spectra recorded in low-temperature argon and xenon matrices, room-temperature solutions, and in the gas phase has allowed us to establish the nature of the photochromic species and of its precursor. Similar to the case of another beta-thioxoketone, monothiodibenzoylmethane, the photo-product has been assigned to the nonchelated SH exo-rotamer of the (Z)-enethiol tautomeric form, whereas the dominant ground-state species corresponds to the chelated (Z)-enol tautomeric form. Detailed vibrational assignments have been proposed for both forms based on quantum chemical calculations and polarization experiments. In the case of the chelated (Z)-enol species prevailing in the ground state, a second-order perturbative anharmonic analysis at the B3LYP/cc-pVTZ level indicated strong anharmonic effects associated with the intramolecular hydrogen bond, leading to a shift of more than 600 cm-1 of the wavenumber of the OH-stretching vibration. A small fraction of the SH endo-rotameric chelated (Z)-enethiol form was also detected under unperturbed conditions. The (Z)-enethiol form can be converted into the (Z)-enol form by irradiation at 290 nm.     

Ester synthesis catalyzed by Mucor miehei lipase immobilized on magnetic polysiloxane-polyvinyl alcohol particles

Mucor miehei lipase was immobilized on magnetic polysiloxane-polyvinyl alcohol particles by covalent binding with high activity recovered. The performance of the resulting immobilized biocatalyst was evaluated in the synthesis of flavor esters using heptane as solvent. The impact on reaction rate was determined for enzyme concentration, molar ratio of the reactants, carbon chain length of the reactants, and alcohol structure. Ester synthesis was maximized for substrates containing excess acyl donor and lipase loading of 25 mg/mL. The biocatalyst selectivity for the carbon chain length was found to be different concerning the organic acids and alcohols. High reaction rates were achieved for organic acids with 8 or 10 carbons, whereas increasing the alcohol carbon chain length from 4 to 8 carbons gave much lower esterification yields. Optimal reaction rate was determined for the synthesis of butyl caprylate (12 carbons). Esterification performance was also dependent on the alcohol structure, with maximum activity occurring for primary alcohol. Secondary and tertiary alcohols decreased the reaction rates by more than 40%.     

A MATHEMATICAL STUDY OF THE SEVEN GRAPTOLITE BIOZONES OF THE LOWER SILURIAN LONGMAXIAN STAGE IN CHINA

With the aid of matrix theory and computer a series of data can be obtained such as the total number of localities in which r species of graptolites appears, the common number of localities in which both i and j species of graptolites appear, the total number of species of graptolites in one locality, the common number of species of graptolites found in both i and j localities, the total number of zones in which r species of graptolites appears, the common number of zones in which both i and j species appear, the total number of species of graptolites found in one zone, the common number of species of graptolites found in both i and j zones. Based on these data a common problem in biostratigraphy may be solved, that is, in the absence of the zonal graptolite which species of graptolites can be chosen to replace the zonal graptolite, or how to detect the zonal graptolite of a graptolite biozone. The result of matrix treatment not only detects the graptolite biozone but is useful to infer the paleo-biogeo     

石墨炉原子吸收法测定生物样品中镉的几种基体改进剂的比较

本文比较了磷酸二氢铵、氟化铵、硫酸铵、氯化钯、氯铂酸以及氯铂酸与多种有机酸的混合试剂在测定ＧＢＷ猪肝标准物质中镉时基体改进效果，其中，氯铂酸的基体改进能力最强，猪肝标准物质的回收率在９０％     

A downsized flow set up based on multicommutation for the sequential photometric determination of iron(II)/iron(III) and nitrite/nitrate in surface water

In this work, a downsized flow set up designed based on multicommutation concept for photometric determination of iron(II)/iron(III) and nitrite/nitrate is surface water is described. The flow system network comprised a set of three-way solenoid valves, reaction coil and a double-channel flow cell, which were nested in order to obtain a compact and small-size instrument. To accomplish the downsizing requirement light source (LED) and radiation detection (phototransistor) were coupled to the flow cell. In order to demonstrated the effectiveness of the system, the photometer methods based on Griess reaction and 1-10-phenantroline for nitrite and iron(II) determination, respectively, were selected. Under computer control the set up provided facilities to handle four reagent solutions employing a single pumping channel, thus permitting also the determination of nitrate and iron(III) after its reduction to nitrite and to iron(II), respectively. The overall system performance was demonstrated working several days running standard solution, no significant variation of base line, linear response range and slop (less than 1%) were observed. The usefulness of the downsized system was ascertained by analyzing a set of surface water. Aiming to access the accuracy sample were also analyzed employing reference procedures and no significant difference at 95% confidence level were observed for the four analytes. Other profitable features such as analytical throughput of 40 determination per hour; relative standard deviation of 1%; linear response range between 50 and 300 μg l⁻¹ for nitrite and nitrate, 0.5-6.0 mg l⁻¹ iron(II) and iron(III); low reagent consumption 75 μg for nitrate/nitrite and 0.6 mg for iron(II)/iron(III) per determination; and 2.4 ml waste generation per determination were also achieved.     

ICP—AES卡尔曼滤波同时测定铁基体中26种痕量元素

本文利用电感耦合等离子体原子发射光谱（ＩＣＰ－ＡＥＳ）多色仪的扫描功能，用Ｃ语言编制了Ｋａｌｍａｎ滤波程度软件包，用该软件包对铁基体中２６种痕量元素进行了回收率试验，并对标准碳素钢样中１３种痕量元素进行了测定，结果表明Ｋａｌｍａｎ滤波完全适用于复杂谱线基体中的多种元素同时分析。