Characterization of Titania/Silica Gel by Means of Low-Pressure Nitrogen Adsorption

Adsorbents synthesized by grafting of titania onto mesoporous silica gel surfaces at different temperatures were studied by means of nitrogen adsorption–desorption and water desorption. The pore size distribution f(R_p) of titania/silica gel depends on the titania concentration (C_TiO2) and the temperature of titania synthesis. Nonuniformity of TiO₂ phase is maximal at a low C_TiO2 value (3.2 wt.% anatase deposited at 473 K), and two peaks of the fractal dimension distribution f(D) are observed at such a concentration of titania, but at larger C_TiO2 values, only one f(D) peak is seen. More ordered filling of pores and adsorption sites by nitrogen, reflecting in the shape of adsorption energy distributions f(E) at different pressures of adsorbate, is observed for adsorbent with titania (rutile+anatase) grafted on silica gel at a higher temperature (673 K).     

多组分体系同时定性定量测定的逐步回归分析法

阐述了逐步回归分析法用于多组分体系同时定性定量分析的原理、实验及数据处理方法。分析了硝基酚类人工样、未知样及合成样。该法可用于仅知可能含有的组分范围的样品分析。     

Refining adsorption parameters of n-butyl alcohol at the interface of mercury electrode with aqueous NaF and Na2SO4 solutions by correcting the adsorbate concentration

As an adjunct to the regression analysis of differential capacitance curves, which allows refining the adsorption parameters, a program, which takes into account possible errors in volume concentrations of organic substances, is developed. Using this procedure, the earlier data on the differential capacitance of a mercury electrode in aqueous solutions of normal butanol (1-BuOH) containing either 0.1 M NaF or 0.05 and 0.5 M Na₂SO₄ as the supporting electrolyte are analyzed. This allows obtaining the most accurate values of adsorption parameters for the systems mentioned above within the framework of the model of two parallel capacitors and the Frumkin isotherm. It is shown that, when a linear dependence of the intermolecular interaction parameter on the electrode potential is taken into account, the standard deviation of experimental capacitance values from those calculated using the mentioned model is 6.8–8.8%, which points to very high accuracy of this phenomenological model.     

Estimation of parameters characterizing the adsorption of sodium,potassium, and rubidium cryptates at the mercury electrode/solution interface

The adsorption of complexes formed by sodium, potassium, and rubidium cations with macrobicyclic ligand (kryptofix 222 with C₁₈H₃₆N₂O₆ composition) is studied as a function of the ligand concentration on a stationary mercury drop in 0.1 M solutions of corresponding sulfates and chlorides by using the differential capacitance technique. Based on the model of two parallel capacitors supplemented by the Frumkin isotherm, the adsorption parameters of studied cryptates are estimated by using the regression analysis technique. Differential capacitance curves calculated with the parameters found are compared with experimental data. The comparison of the found adsorption parameters makes it possible to reveal the effects of the nature of included cations and specifically adsorbed supporting-electrolyte anions on the adsorption behavior of cryptates under study.__________Translated from Elektrokhimiya, Vol. 41, No. 4, 2005, pp. 475–481.Original Russian Text Copyright © 2005 by Stenina, Sviridova.     

Chemometric data analysis of pollutants in wastewater—a case study

In this study, chemometric techniques such as cluster analysis (CA), discriminant analysis (DA), principal component analysis (PCA) and partial least squares (PLS) were used to analyse the wastewater dataset to identify the factors which affect the composition of sewage of domestic origin, spatial and temporal variations, similarity/dissimilarity among the wastewater characteristics of cis- and trans-drains and discriminating variables. Samples collected from 24 wastewater drains in Lucknow city and from three sites on Gomti river in the month of January/February, May, August and November during the period of 5 years (1994-1999) were characterized for 32 parameters. The multivariate techniques successfully described the similarities/dissimilarities among the sewage drains on the basis of their wastewater characteristics and sources signifying the effect of routine domestic/commercial activities in respective drainage areas. Spatial and seasonal variations in wastewater composition were also determined successfully. CA generated six groups of drains on the basis of similar wastewater characteristic. PCA provided information on seasonal influence and compositional differences in sewage generated by domestic and industrial waste dominated drains and showed that drains influenced by mixed industrial effluents have high organic pollution load. DA rendered six variables (TDS, alkalinity, F, TKN, Cd and Cr) discriminating between cis- and trans-drains. PLS-DA showed dominance of Cd, Cr, NO₃, PO₄ and F in cis-drains wastewater. The results suggest that biological-process based STPs could treat wastewater both from the cis- as well as trans-drains, however, prior removal of toxic metals will be required from the cis-drains sewage. Further, seasonal variations in wastewater composition and pollution load could be the guiding factor for determining the STPs design parameters. The information generated would be useful in selection of process type and in designing of the proposed sewage treatment plants (STPs) for safe disposal of wastewater.     

Simultaneous measurement of glucose and glutamine in aqueous solutions by near infrared spectroscopy

A method is described for measuring the concentrations of both glucose and glutamine in binary mixtures from near infrared (NIR) absorption spectra. Spectra are collected over the range from 5000–4000/cm (2.0–2.5μm) with a 1-mm optical path length. Glucose absorbance features at 4710, 4400, and 4300/cm and glutamine features at 4700, 4580, and 4390/cm provide the analytical information required for the measurement. Multivariate calibration models are generated by using partial least squares (PLS) regression alone and PLS regression combined with a preprocessing digital Fourier filtering step. The ideal number of PLS factors and spectral range are identified separately for each analyte. In addition, the optimum Fourier filter parameters are established for both compounds. The best overall analytical performance is obtained by combining Fourier filtering and PLS regression. Glucose measurements are established over the concentration range from 1.66–59.91 mM, with a standard error of prediction (SEP) of 0.32 mM and a mean percent error of 1.84%. Glutamine can be measured over the concentration range from 1.10–30.65 mM with a SEP of 0.75 mM and a mean percent error of 6.67%. These results demonstrate the analytical utility of NIR spectroscopy for monitoring glucose and glutamine levels in mammalian and insect cell cultures.     

径向基-偏最小二乘-贝叶斯方法及其在化学模式分类中的应用

提出一种用于模式分类的RBF-PLS—Bayes方法。它集成地应用径向基(RBF)变换与偏最小二乘(PLS)方法，从原有模式中提取出分类能力甚强的成分，然后进行贝叶斯(Bayes)判别。这种集成方法尤其适用于复杂化学信息的模式分类，本文将其应用于两种类型的化学模式分类问题，均取得了令人满意的效果。与经典的判别分析方法和单纯的神经网络方法相比，具有明显的优越性。     

Adsorption parameters of cyclobutane carboxylic acid at the interface of a mercury electrode with aqueous solutions of 0.4 M Na2SO4 + 0.1 M H2SO4

Based on the results of the regression analysis of differential capacitance curves of a mercury electrode in solutions of cyclobutane carboxylic acid (CBCA) at 25, 50, and 75°C, the adsorption parameters that enter into both the Frumkin isotherm and the model of two parallel capacitors are estimated. The free energies of adsorption found from the analysis of the temperature dependence of these parameters are incorrect due to the partial blowing out of CBCA during the deaeration of the solutions. The corresponding adsorption parameters are corrected under the assumption that the hydrophobic effect associated with the increase in the liquid-water entropy at the removal from it of CBCA molecules is the same as for n-valeric acid. The physical meaning of the squeezing-out effect is revised.     

Fast Marching Method for Calculating Reactive Trajectories for Chemical Reactions

We present a method for computing classical Newtonian trajectories that minimize the path length or transit time from reactant to product. Our approach is based on a generalization of the fast-marching method, which allows us to construct the solution of the Hamilton-Jacobi equation for the action that optimizes the desired quantity. The resulting “reactive paths” can be interpreted as reaction coordinates but, unlike more conventional choices, they contain dynamical information about the chemical system of interest.     

一个多元校正的稳健诊断新方法

提出一种新的稳健诊断方法，与最小二乘估计结合进行混合物光谱中非线性点的诊断。文中探讨了该方法的性能，用计算机数字模拟及实际多组分光谱体系夺其进行检验，展示了此诊断方法在分析化学计量学中实际应用的可行性。