THF—FER沸石的系列研究—1．晶体结构稳定性

四氢呋喃（THF）-Na2O-SiO2-Al2O3-H2O体系水热合成的THF-FER沸石，经酸交 换-焙烧脱THF（Ⅰ）或焙烧脱THF-酸交换（Ⅱ）的不同方式处理，均可制得低钠H- FER沸石。经XRD，^27Al与^29Si MAS NMR,低温氮吸附等表征证明，通过1273K高温 的热处理和1073K饱和水蒸气下的水热处理，H-FER沸石骨架保持高度稳定。在高温 水蒸气作用下，Si(2Al）容易从骨架上脱离，而Si(1Al）则保持相对稳定，以（Ⅱ ）方法处理，制备的H-FER沸石在水热条件下易产生较多的硅差劲基缺陷。经高温 热和水热处理后，H-FER沸石孔道结构基本保持完美、开放。     

Use of a database of plots of pesticide retention (R F) against mobile-phase composition.Part I. Correlation of pesticide retention data in normal- and reversed-phase systems and their use to separate a mixture of ten pesticides by 2D TLC

Summary Ten pesticides have been completely separated by two-dimensional (2D) development on TLC plates coated with coupled layers of octadecyl silica (reversed-phase, RP) and plain silica (normal-phase, NP). The binary mobile phases, aqueous-organic for RP chromatography and nonaqueous for NP chromatography, were chosen from plots ofR _F against mobile-phase composition and graphicalR _F(RP)-R _F(NP) correlations. The different selectivity of the RP and NP systems enabled dispersion of spots over the plate area and good separation.     

Experimental and theoretical study of vibrational spectra and structure of dihalogermylene and dihalostannylene complexes with 1,4-dioxane and triphenylphosphine

Vibrational (Raman and IR) spectra of the 1:1 complexes of dihalogermylene and dihalostannylene with 1,4-dioxane and PPh₃ have been reported, the structures of the complexes Cl₂Ge·C₄H₈O₂ and Cl₂Ge·PPh₃ updated using high-resolution X-ray method. Quantum-chemistry calculations of the geometry and normal mode frequencies and eigenvectors were carried out for some of the complexes. The results show that in the structure of the polymeric solid complexes of X₂M with 1,4-dioxane, intermolecular coordination XM plays a prominent role, whereas the corresponding complexes with PPh₃ are monomeric. In the vibrational spectra of all the complexes, an inversion of symmetric and antisymmetric stretching νXM (X=Cl, Br; M=Ge, Sn) frequencies, found for ‘free’ X₂M^II particles, still persists, suggesting that the X₂M moieties preserve their specifity as carbene analogues also in the complexes.     

The ordered phase of methylammonium lead chloride CH3ND3PbCl3

The perovskite-structured compound methylammonium lead chloride orders into a low-temperature phase of space group Pnma, in which at 80 K each of the orthorhombic axes , and is doubled with respect to the room temperature disordered cubic phase (). The structure was solved by ab initio methods using the programs EXPO and FOX. This unusual cell basis for space group Pnma is not that of a standard tilt system. This phase, in which the methylammonium ions, are ordered shows distorted octahedra. The octahedra possess a bond angle variance of 60.663°² and a quadratic elongation of 1.018, and are more distorted than those in the ordered phase of methylammonium lead bromide. There is also an alternating long and short Pb-Cl bond along a, due to an off-center displacement of Pb within the octahedron. This suggests that the most rigid unit is actually the methylammonium cation, rather than the PbCl₆ octahedra, in agreement with existing spectroscopic data.     

Simulation of13C NMR chemical shifts for polychlorinated and polybrominated oxybenzenes with two-particle increment scheme

A two-particle system of OY-Cl and OY-Br mixed increments for predicting¹³C NMR chemical shifts of polyhalogenated polyoxybenzenes has been developed. It has been found that only theortho- and para-interactions of the OY and Hal substituents contribute significantly to the¹³C chemical shifts and that theortho-effects of the OY located between Ha1 and H and those of the OY located between two Ha1 atoms are different. Additional effects are due to solvating solvents. The increment scheme is predictive over the whole class of compounds under consideration and may be realized on personal computers.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 617–624, April, 1994.     

Miniaturization of separation techniques using planar chip technology

Miniaturization of separation columns implies equally reduced vol- umes of injectors, detectors, and the connecting channels. Planar chip technology provides a powerful means for the fabrication of micron-sized structures such as channels. This is demonstrated by two examples. An optical absorbance detector chip exhibits the expected behavior of a 1 mm optical path length cell despite its volume of 1 nL. A capillary electrophoresis device allows integrated injections of 100 pL samples, efficiencies of 70,000 to 160,000 theoretical plates in 10 to 20 seconds, and external laser-induced fluorescence detection at any capillary length of choice between 5 and 50 mm.     

Selection of thermotolerant yeasts for simultaneous saccharification and fermentation (SSF) of cellulose to ethanol

A total of 27 yeast strains belonging to the groupsCandida, Saccharomyces, andKluyveromyces were screened for their ability to grow and ferment glucose at temperatures ranging 32-45°C. K. marxianus andK. fragilis were found to be the best ethanol producing organisms at the higher temperature tested and, so, were selected for subsequent simultaneous saccharification and fermentation (SSF) studies.     

Preparation of apolar glass capillary columns by the barium carbonate procedure

As an extension of previous reports, the barium carbonate procedure has been optimized in detail for the preparation of apolar columns. The aim was to produce optimum overall column characteristics, and to maintain them unchanged under the prolonged influence of the highest possible temperature. The main parameters under optimization were glass variety, leaching of glass surface with aqueous HCl, and amount of barium carbonate deposited, while deactivation and coating were kept constant. The basic column characteristics were adsorption properties and thermostability of deactivation, acid/base behaviour and separation efficiency. They were determined by a new, quantitative testing procedure. Intense leaching was able to eliminate almost totally the differences between glass varieties and to create a well-defined glass surface. While untreated glass, leached glass, and barium carbonate treated glass showed specific weak points in the respective column quality, the combination of leaching and barium carbonate treatment yielded the highest and most stable quality. Some technical modifications of the preparation procedure are described, including deactivation in the gas phase, and use of pentane as a solvent for static coating.     

辐照对聚己内酯结构和性能的影响

研究了γ 辐照对不同分子量的聚己内酯 (PCL)的力学性能、热性能、结晶行为的影响 ,在此基础上 ,研究了辐射交联后的PCL的形状记忆行为 .研究结果表明 ,PCL的分子量越大 ,辐射交联所需的凝胶化剂量越低 .溶胶分数S +S1 2 与 1 D的关系很好地符合Charlesby Pinner关系式 ,说明PCL的辐射交联属于无规交联 .剂量对PCL的力学性能影响显著 ,剂量越大 ,抗张强度和断裂伸长率下降越多 ,但分子量较高的PCL的抗张强度受剂量的影响较小 .DMA分析表明 ,聚己内酯辐照交联后的弹性模量和耐热性能显著提高 .交联度较高的PCL表现出高弹态 ,可以拉伸 ,并具有较好的形状记忆行为 .DSC分析表明 ,辐射交联使PCL的结晶度有所增加 ,但也使结晶熔点有所降低     

Acid-catalyzed attack of the dinitrogen ligand in thecis-(Me2PhP)4Mo(N2)2 andtrans-(Ph2PCH2CH2PPh2W(N2)2 complexes by nitronium and nitrosonium cations with the formation of nitrogen oxides

The interaction of labeled dinitrogen complexescis-(Me₂PhP)₄Mo(¹⁵N₂)₂ andtrans-(dppe)₂W(¹⁵N₂)₂ with non-labeled nitronium and nitrosonium fluoroborates,¹⁴NO₂BF₄ and¹⁴NOBF₄, in sulfolane at room temperature in the presence of H₂SO₄ results in rapid formation of labeled nitrous and nitric oxides (¹⁵N¹⁴NO,¹⁵NO), as well as¹⁵N¹⁴N. The yield of the products depends on the reagent ratio and reaches 10–20 mol. % per mole of a complex under optimum conditions. The mechanism of the reactions found is proposed. It involves the step of protonation of the dinitrogen ligand to form the corresponding hydrazido(2–) derivatives, which are then attacked by nitronium or nitrosonium cations. In accordance with the mechanism proposed, it was established that the hydrazido(2–) complexes, (Me₂PhP)₃Mo(¹⁵N₂H₂)Cl₂ and (dppe)₂W(¹⁵N₂H₂)Cl₂, are capable of forming¹⁵N¹⁴NO,¹⁵NO, and¹⁵N¹⁴N under the action of¹⁴NO₂BF₄ and¹⁴NOBF₄ in the absence of an acid.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 13–13, July, 1995.