二茂铁甲酰丙酮缩氨基硫脲金属配合物研究

将二茂铁甲酰丙酮与硫代氨基脲在水 -乙醇介质中进行缩合反应 ,得金属有机多齿配体C5H5Fe C5H4COCH2 C(CH3 ) =NNHCSNH2 (简记作 Fc TS) ,该配体分别与 d-过渡金属 [Cu( )、Co( )、Ni( )、Mn( ) ]、 B族金属 [Zn( )、Cd( ) ]及主族金属 [Pb( ) ]乙酸盐反应 ,合成了分子式为 (Fc TS) 2 M(CH3 COO) 2 的 7个新型配合物。经元素分析、IR、UV- Vis,1 H HMR、摩尔电导及固体电导的测定对配合物组成、结构、波谱性质和导电性能进行了研究。     

A novel oligothiophene derivative as a hole‐transport with emitting material for OLED

A novel oligothiophene derivative containing the triphenylamine moiety with high glass transition temperature (T_g; 135 °C), 5,5′‐{bis[4‐di(4‐thiophenyl)amino]phenyl}‐2,2′‐bithiophene (TTPA‐dimer) was synthesized by the dimerization of tris[4‐(2‐thienyl)phenyl]amine (TTPA) with a palladium catalysis. Some types of electroluminescent (EL) devices that use the amorphous material for a hole‐ and an electron‐transporting with an emitting layer were fabricated. These devices emitted a bright green‐yellowish light (λ_emi; around 510 nm) with a small full width at half maximum (FWHM) rather than that of Alq₃. The single layer EL device showed a maximum luminance of 221 cd/m² at 8 V (0.06 lm/W at 100 cd/m²). On the other hand, the double layer (TTPA‐dimer/Alq₃) EL device that used Alq₃ as the electron transport material was increased up to 10830 cd/m² at 12 V (0.89 lm/W at 300 cd/m²) and with a lower turn‐on voltage (3.2 V at 0.1 cd/m²) than other types of EL devices. Copyright © 2003 John Wiley & Sons, Ltd.     

Two New Xanthone Glycosides from Polygala tenuifolia

Two new xanthone glycosides,polygalaxanthone IV and V were isolated from the roots of Polygala tenuifolia Willd. Their structures were established as 6-O-[α-L-rhamnopyranosyl-(1→2)-β-D-glucopyranosyl]-1-hydroxy-3,7-dimethoxyxanthone(polygalaxanthone IV), and 6-O-[α-L-rhamnopyranosyl-(1→2)-β-D-glucopyranosyl]-1,3-dihydroxyl-7-methoxyxanthone (polyga-laxanthone V),respectively, on the basis of chemical and spectral evidence.     

接枝和交联对纳米Si02改性NR／PP共混型热塑弹性体的影响

动态硫化制备纳米二氧化硅（SiO2）改性天然橡胶，聚丙烯共混型热塑性弹性体（NR/PPTPE）．研究了马来酸酐，苯乙烯，过氧化二异丙苯（MAH／St／DCP）多单体“就地”熔融接枝、交联对TPE力学性能、耐溶剂性能和耐热变形性能的影响，并用SEM分析了TPE的断面形貌．结果表明：纳米SiO2和MAH／St／DCP的最佳质量分数分别为0．03和0．0375／0．0188／0．00375时，MAH／St／DCP接枝、交联改性NR／PP／纳米SiO：TPE的力学性能、耐溶剂性能和耐热变形性能最佳．MAH／St／DCP“就地”接枝、交联通过细化交联NR分散相、改善交联NR分散的均匀性和增加两相之间的共交联，使NR与PP两相界面结合强度明显提高，NR／PPTPE的综合性能得到明显的改善．     

催化极谱法连续测定岩石中钨和钼

本文提出了在二苯基乙醇酸-二苯胍-氯酸钠催化极谱体系测钨后,加入少许钛铁试剂,使钼产生一个极灵敏的导数波。谊波形尖锐、对称,便于测量钼。建立的连测体系简便灵敏,用于岩石样品中钨和钼的测定,取得了满意的效果。     

Accurate Gaussian basis sets for the H2O molecule generated with the molecular improved generator coordinate Hartree–Fock method

The molecular improved generator coordinate Hartree–Fock (MIGCHF) method is used to generate accurate basis sets of primitive Gaussian-type functions for the H₂O molecule. Sequences of increasing size atom centered basis sets are employed to explore the accuracy that can be achieved with this method. Using the O(24s14p8d5f2g1h);H(22s9p5d2f1g) basis set, the HF and second-order electron correlation energies of the H₂O ground state at the experimental geometry are computed as −76.0674680 and −0.3491935 hartree, respectively. The HF energy is in error by 20 μhartree and the second-order correlation energy corresponds to 96.5% of an estimate of the limiting value. The relevance of the present calculations is to show the accuracy that can be achieved in studies of small polyatomic molecules with the MIGCHF method.     

Synthesis of novel analogs of aromatic peptide nucleic acids (APNAs) with modified conformational and electrostatic properties

Aromatic peptide nucleic acid analogs having an N-(2-aminobenzyl)glycine backbone (APNA 1) were previously identified as promising new leads for the design of polyaromatic DNA mimics. Structural modifications of 1, which lock the aromatic backbone into a unique conformation, while maintaining the same space distribution between the nucleobases as in 1, were investigated. The electrostatic potential of the aromatic backbone was also modified in an attempt to improve the solubility of these compounds in aqueous media and to evaluate how the quadrapole of the aromatic backbone may influence the biophysical properties of the APNA oligomers. PNA hexamers containing a single monomer insert of each new APNA monomer were used to explore the hybridization properties of these analogs with poly rA and poly dA. Preliminary results indicated that these modifications do not seriously alter the molecular recognition properties of APNAs towards DNA and RNA.     

Tetramethyldisilan-1,2-diyl-verbrückte Dicyclopentadienyl-und Diindenylmetalldichloride der 4. Gruppe – Kristallstruktur von

Tetramethyldisilane-1,2-diyl bridged Dicyclopentadienyl and Diindenyl Metal Dichlorides of the Group 4 Metals – Crystal Structure of Dicyclopentadienyl and diindenyl metal dichlorides of the type Cp′? SiMe₂SiMe₂? Cp′MCl₂ (Cp′ = C₅H₄, M = Ti ( 1 ), Zr ( 2 ), Hf ( 3 ); Cp′ = C₉H₇, M = Zr ( 4 ), Hf ( 5 )) were synthesized and characterized by means of their ¹H, ¹³C, ²⁹Si-n.m.r., MS, and IR spectra. The crystal structure of 2 was determined.     

Characterization and separation of Al13 species using gel-filtration chromatography

A polyaluminum chloride (PAC) sample was prepared using a slow alkaline titration method. The Bio-Gel P-100 gel column chromatographic technique was used to separate and characterize the various forms of aluminum present in the prepared PAC solution. The effluents from a gel column were monitored using online chemical method: Al-Ferron timed complexation spectrophotometry and by ²⁷Al nuclear magnetic resonance (NMR) spectroscopy. Effects of different experimental conditions such as eluent flow rate, ionic strength and pH on separation of Al₁₃ were investigated. Experimental results indicated that molecule size exclusion was not the only parameter affecting the column chromatographic separation efficiency of Al₁₃ but molecule charge as well. Reducing the eluent flow rate, increasing the ionic strength and suitable pH resulted in increase in the separation efficiency. Experimental results clearly indicated that by varying the experimental conditions, it is possible to produce pure Al₁₃ species using a gel column chromatographic technique.     

Acetylation and molecular mass effects on barrier and mechanical properties of shortfin squid chitosan membranes

Chitosan samples with different N-deacetylation levels were obtained from β-chitin under heterogeneous alkali conditions. Oxidative depolymerisation was performed to attain low-acetylated chitosan samples with different molecular mass. Water vapour permeability, membrane swelling and tensile mechanical properties were analysed in plasticized self-supporting chitosan membranes. The main purpose was to describe unambigously the effect of the biopolymer molecular mass and acetylation degree on these properties. Commercially available chitosan samples derived from α-chitin were also studied for comparison. The equilibrium degree of swelling in water and the water vapour permeability increase by increasing the molecular mass or the degree of acetylation. Regarding the effect on the mechanical properties, generally harder and tougher membranes were obtained for chitosans with higher molecular mass or lower acetylation degree. These observations are tentatively explained based on the different structural characteristics of the polymer and can lead to a better understanding of the tools necessary to tailor a specific type of chitosan membrane.