Studies on the Complexes of N,N′-Bis[o-(diphenylphosphino)benzylidene]ethylenediamine with Transition Metal Ions

The thermodynamic parameters for the interaction of Cu²⁺, Ni²⁺, Co²⁺, Cd²⁺, andAg⁺ with the new title ligand have been determined by titration calorimetry in 50% THF–methanol (V/V) at 25 °C.Ag⁺ exhibited remarkably higher complexation selectivity.Ag⁺ and several transition metal ions have been transportedusing this ligand as carrier in a bulk liquid membrane. CompetitiveAg⁺–M²⁺ transport studies have also beencarried out for the same system. In this membrane transport study, high transport of Ag⁺ was observed in both single and competitiveAg⁺–M²⁺ transport studies. The complexformation of N,N-bis[o-(diphenylphosphino)benzylidene]ethylenediamine (P₂N₂) with silver,[Ag(P₂N₂)] (NO₃), (1) is reported. Complex 1 has been characterized by X-ray crystallography. 1 ismonoclinic, space group P2_1/n (No. 14), with cell dimensionsa = 13.398(4) , b=12.577(5) , c = 21.521(4) , =100.14(2) , V = 3570(2) ³ and Z = 4.     

Calibration of a quenching and deformation differential dilatometer upon heating and cooling: Thermal expansion of Fe and Fe-Ni alloys

Dilatometry is a technique for precise measurement of thermal dilatation of materials during heating or cooling. A procedure has been presented for calibration of a differential dilatometer operating with electromagnetic heating for metallic specimens both upon heating and cooling as well as under uniaxial compressive and tensile loading. The dilation signal has been calibrated for both heating and cooling and for uniaxial loading (compressive and tensile) using platinum or iron reference specimens, for which recommended dilational data are available. The ferro- to paramagnetic transition (characterised by the Curie temperature) of pure iron or iron-based alloys has been adopted to calibrate the temperature in the dilatometric measurement under different loading modes during heating and cooling. On this basis calibrated data for the thermal expansion coefficients of Fe and Fe-Ni alloys have been obtained.     

Effects of Total Thermal Balance on the Thermal Energy Absorbed or Released by a High-Temperature Phase Change Material

Front tracking and enthalpy methods used to study phase change processes are based on a local thermal energy balance at the liquid–solid interface where mass accommodation methods are also used to account for the density change during the phase transition. Recently, it has been shown that a local thermal balance at the interface does not reproduce the thermodynamic equilibrium in adiabatic systems. Total thermal balance through the entire liquid–solid system can predict the correct thermodynamic equilibrium values of melted (solidified) mass, system size, and interface position. In this work, total thermal balance is applied to systems with isothermal–adiabatic boundary conditions to estimate the sensible and latent heat stored (released) by KNO3 and KNO3/NaNO3 salts which are used as high-temperature phase change materials. Relative percent differences between the solutions obtained with a local thermal balance at the interface and a total thermal balance for the thermal energy absorbed or released by high-temperature phase change materials are obtained. According to the total thermal balance proposed, a correction to the liquid–solid interface dynamics is introduced, which accounts for an extra amount of energy absorbed or released during the phase transition. It is shown that melting or solidification rates are modified by using a total thermal balance through the entire system. Finally, the numerical and semi-analytical methods illustrate that volume changes and the fraction of melted (solidified) solid (liquid) estimated through a local thermal balance at the interface are not invariant in adiabatic systems. The invariance of numerical and semi-analytical solutions in adiabatic systems is significantly improved through the proposed model.     

Elastic Analysis of Anisotropic Functionally Graded Rotating Disks With Non-Uniform Thicknesses北大核心CSCD

研究了任意梯度变化的变厚度各向异性转动圆盘的弹性问题.假设圆盘绕刚性轴匀速转动,其材料性能和厚度沿径向任意梯度变化.考虑圆盘在中心转轴处受位移约束,外侧自由,根据各向异性转动圆盘的平衡微分方程,得到关于径向应力的Fredholm积分方程,继而通过对Fredholm积分方程进行数值求解,得到结构的位移场和应力场.对具体梯度变化情况仅需代入相应梯度变化进行求解即可.数值算例部分,通过假设厚度、弹性模量等参数为特殊的幂函数形式,将由Fredholm积分方程求出的数值解与对应的精确解进行对比,以及针对常见的Voigt模型,将由该方法算得的数值解和ANSYS有限元计算结果进行对比,验证了该方法的准确性和精度.其次,针对Voigt模型,重点分析了厚度变化、材料性能梯度参数、各向异性度等对应力场和位移场的影响.提出了针对材料性能和厚度沿径向呈任意梯度变化的圆盘结构弹性分析方法,将为优化功能梯度圆盘的结构和材料参数、有效调整构件应力分布、提高结构安全性,提供强有力的工具;算例分析结果对功能梯度圆盘在复杂条件下的结构安全设计有重要的理论指导意义.     

CLIMATIC CHANGE SINCE LITTLE ICE AGE RECORDED BY DUNDE ICE CAP

The climatic change since the Little Ice Age recorded in the Dunde Ice Cap is presentedin this paper. There have been three cold periods and three warm periods since 1400AD.Among them, the coldest one was in the 17th century. Many evidences verified the three coldand warm variations recorded in the Dundc Ice Cap. But it was found from the comparison between the Dunde Icc Cap climatic record and thewinter temperature record in Shanghai that there was a temporal dfference in climatic changebetween East China and West China. The general trend is that the cooling and warmingprocesses in West China were earlier than that in East China. In the Dunde Ice Cap, it isnow in an anomalous warm period, while it is not as warm as in Dunde Ice Cap recordaccording to the winter temperature in Shanghai. In addition to the possible cause of temporaldifference in climatic change between West China and East China, another possible cause isthat the greenhouse effect of CO_2 may already be recognizable in the Dunde Ice Cap a     

Microcalorimetry, energetics and binding studies of DNA-dimethyltin dichloride complexes

The interaction of dimethyltin dichloride (Me₂SnCl₂) with calf thymus DNA was studied at 27 °C, pH 7.6 using various techniques including isothermal titration calorimetry (ITC) and UV-Vis, fluorescence and IR spectrophotometries. The binding isotherm and enthalpy curve for Me₂SnCl₂-DNA interaction was a biphasic transition process. This was determined by the analysis of the binding data with the Hill equation. The first phase of the enthalpy curve (exothermic process) was consistent with the first set of binding site, the second phase (endothermic process, less exothermicity) was consistent with second set of binding site from the cited interactions. Our results showed that the first set of binding sites is occupied by one mole of ligand bound per near 1 base pair of DNA. The DNA-ethidium bromide (EB) complex, in the presence of Me₂SnCl₂, caused the quenching of the fluorescence emission. The Scatchard plots illustrated a non-intercalating manner for such quenching. The DNA-EB complex results indicated that the binding of Me₂SnCl₂ is with the phosphate groups of DNA at low ligand concentrations (<9 mM). This was confirmed with the IR spectrophotometric spectra. However, the binding at higher ligand concentrations (>9 mM) was with the base groups of DNA. Therefore, these results suggest that the Me₂SnCl₂ binding to DNA at low concentrations occurs through an outside interaction by an exothermic process. However, the partial unfolding of the DNA caused at higher concentrations of Me₂SnCl₂ is through an endothermic process involving interactions with the base groups.     

Thermodynamic quantities for the interaction of SO 4 2− with H+ and Na+ in aqueous solution from 150 to 320°C

The aqueous reactions,

Method to determine quadruple points of a two-component system containing a simple hydrate phase and behavior of the system near these points

A method for determining quadruple points of a two-component system containing a simple hydrate phase is proposed. This method utilizes the quasi-static change of the system along three-phase equilibrium lines and was proved to be able to determine the quadruple points as accurately as the conventional method. By using this method, even though some preparation is necessary, a quadruple point can be determined in just a single experimental run. The behavior of the system near the quadruple points was also examined experimentally, for both the quasi-static and the irreversible change cases. At the quadruple points, the temperature and pressure of the system were kept constant for a while, as at the triple point of water. In both cases, the representative point of the state of the system passed through the quadruple point on a p–T diagram.     

Thermal characteristics of polyurethane foams incorporated with phase change materials

Thermal energy storage plays an important role in heat management because of the demand for developed energy conservation, and has applications in diverse areas, from building heating/cooling systems which enable solar energy incorporation into the structure, to textiles and clothings providing an enhanced thermal comfort. In this study, we aimed to improve thermal characteristics of polyurethane rigid foams that have been widely used for thermal insulation as the ultimate energy savers due to their ability to form sandwich structures with various facer materials. Through a laboratory-scale work, two paraffin waxes acting as phase change materials, namely n-hexadecane and n-octadecane, each of which is capable of managing large heat storage/release, were directly incorporated into the polyurethane foams at different ratios. Polymerization modified by means of n-alkane addition could be achieved without any adverse effect. In order to determine both structural and thermal characteristics, seven types of foams produced were examined by FT-IR, SEM, DSC analyses, calorimeter bomb and mechanical tests. Results show that polyurethane foams can be designed as thermal insulators equipped with an improved buffering function against temperature changes.     

Preparation and Characterization of Microencapsulated Hexadecane Used for Thermal Energy Storage

Polyurea microcapsules about 2.5μm in diameter containing phase change material for thermal energy storage application were synthesized and characterized by interfacial polycondensation method with toluene-2,4-diisocyanate and ethylenediamine as monomers in an emulsion system. Hexadecane was used as a phase change material and OP, which is nonionic surfactant, and used as an emulsifier. The chemical structure and thermal behavior of the microcapsules were investigated by FTIR and thermal analysis respectively. The results show encapsulated hexadecane has a good potential as a solar energy storage material.