Behavior of rifampicin in association with<Emphasis Type="Italic"> β</Emphasis>-cyclodextrin in aqueous media: a spectroscopic and conductometric study

The behavior of rifampicin (D) with -cyclodextrin (-CyD) in aqueous media (W) has been examined by means of UV-vis spectroscopy and conductivity measurements over the temperature range 15–30 °C. The UV-vis study has been used to characterize the systems. The estimated molar absorption coefficient for D/CyD/W system was 10757±280 M^–1 cm^–1 in comparison to the value of 6133±99 M^–1 cm^–1 for D/W system. The conductivity was measured (i) as a function of [D] for binary D/W systems, (ii) as a function of [CyD], keeping the concentration of drug constant, for D/CyD/W system, and (iii) as a function of [D] in the presence of a constant cyclodextrin concentration. Two transition points were observed for D/CyD/W system at constant [CyD], which were assigned as cac-1 and cac-2. The stoichiometry of the association was estimated from the conductivity data. This was obtained from [drug] value at which the change in slope of occurs. The standard free energy change, of aggregation was also calculated from the critical concentration data. An attempt has also been made to estimate the stoichiometry of -cyclodextrin:rifampicin association.     

BaLaB_9O_（16）中Ce~（3＋）敏化Dy~（3＋）发光的机理

在紫外光激发下，研究了ＢａＬａＢ９Ｏ（１６）中Ｄｙ（３＋）、Ｃｅ（３＋）的发光光谱、激发光谱、发光强度及荧光寿命随着组成变化的规律性．结果表明：Ｄｅ（３＋）对Ｄｙ（３＋）的发光有相当强的敏化作用，Ｃｅ（３＋）→Ｄｙ（３＋）的能量传递效率可高达９３％，能量传递的机理为电偶极－偶极相互作用的共振传递．根据３４９ｎｍ激发下Ｄｙ（３＋）发光强度与浓度的关系，证明了Ｄｙ（３＋）发光的自身浓度猝灭机理也为电偶极－偶极相互作用．     

Hydrogen Gas Sensing of High Electrical Conducting-P2O5-SiO2 Glasses Prepared by Sol-Gel Process

High proton-conducting P₂O₅-SiO₂ glass was applied to the electrolyte of the hydrogen concentration cell for hydrogen gas sensing. 5P₂O₅·95SiO₂ glass was prepared using the sol-gel method and its electrical conductivity and electromotive force were measured at 50°C as a function of both the ambient humidity and hydrogen gas concentration. The electrical conductivities increased with increasing humidity and reached 10^–2 S/cm at 90% relative humidity. The electromotive force of the hydrogen concentration cell, where the glass was used as a membrane, showed good Nernstian response to hydrogen pressure in the high relative humidity region.     

新型氧离子导体La2Mo1.8Ga0.2O9陶瓷的合成及其电性能

通过高温固相合成法首次合成了La₂Mo_1.8Ga_0.2O₉陶瓷样品. 粉末XRD结果表明, 该样品为单一立方相La₂Mo₂O₉结构. 以陶瓷样品为固体电解质、多孔性铂为电极, 采用交流阻抗谱、气体浓差电池、氧泵等方法研究了样品在600～1000 ℃下各种气氛中的离子导电特性. 结果表明, 氧浓差电池电动势的实测值与理论值吻合得很好, 氧离子迁移数为1, 表明该陶瓷样品在该温度下氧气气氛中为一纯氧离子导体; 氧泵(氧的电化学透过)实验结果进一步证实了该样品在氧气气氛中为一纯氧离子导体; 在氧分压p(O₂)＝10^－5～10⁵ Pa的高氧分压气氛中, 电导率与氧分压变化基本无关, 表明在该氧分压范围内样品为纯离子导体, 这与氧浓差电池电动势测定结果相吻合; 在低氧分压为10^－5～10^－15 Pa范围内, 总电导率随氧分压降低而稍有升高, 表明在该氧分压范围样品为氧离子与电子的混合导体; 在600～1000 ℃下氧离子电导率＞10^－2 S•cm^－1, 显著高于母体La₂Mo₂O₉的氧离子电导率, 1000 ℃时的氧离子电导率为0.07 S•cm^－1.     

Determination of Aggregation Parameters of Hexadecyltrimethylammonium Bromide from Probe Absorption

The mean aggregation number (n) and the critical micelle concentrations (CMC) of reverse micelles formed by hexadecyltrimethylammonium bromide have been determined by means of an optical absorption probe (acridine orange). The procedure to obtain these quantities from absorption spectrophotometric measurements is described. The CMC and mean aggregation number are in satisfactory agreement with published results obtained from more sophisticated methods.     

Electroosmosis through a Cation-Exchange Membrane: Effect of an ac Perturbation on the Electroosmotic Flow

Electroosmosis experiments through a cation-exchange membrane have been performed using NaCl solutions in different experimental situations. The influence of an alternating (ac) sinusoidal perturbation, of known angular frequency and small amplitude, superimposed to the usual applied continuous (dc) signal on the electroosmotic flow has been studied. The experimental results show that the presence of the ac perturbation affects the electroosmotic flow value, depending on the frequency of the ac signal and on the solution stirring conditions. In the frequency range studied, two regions have been observed where the electroosmotic flow reaches a maximum value: one at low frequencies (Hz); and another at frequencies of the order of kHz. These regions could be related to membrane relaxation phenomena.     

The solubilization of alcohols in micellar solutions

The specific conductivities of dodecyldimethylbenzylammonium bromide (C12BBr) have been determined in aqueous butanol and aqueous benzyl alcohol solutions in the temperature range of 5-40°C. From these data the temperature dependent critical micelle concentration (cmc) was determined. The molar fraction of alcohol in the micelle was estimated using the theory suggested by Motomura et al. for surfactant binary mixtures. The thermal properties such as standard Gibbs free energy, enthalpy and entropy of solubilization of alcohols in the micelles were estimated for the phase separation model. The change in heat capacity upon solubilization of alcohol in the micelle has been estimated form the above properties. This revised version was published online in July 2006 with corrections to the Cover Date.     

The aggregation of sodium dehydrocholate in water

 We used a battery of different methods to study the association in aqueous sodium dehydrocholate (NaDHC) solutions. This salt associates by a stepwise mechanism. Below (9.6 ± 4.2) × 10⁻⁴ mol dm⁻³ there is a molecular solution with some strongly insoluble dehydrocholic acid produced by hydrolysis. Between (9.6 ± 4.2) × 10⁻⁴ and (5.2 ± 2.2) × 10⁻³ mol dm⁻³, an aggregate similar to acid soap (NaDHC.HDHC) appears and its amount and the aggregate's size increase with concentration. At =(2.20 ± 0.85) × 10⁻² mol dm⁻³ the aggregates formed have properties usually associated with true micelles, such as solubilisation of water-insoluble dyes. These aggregates increase in size with concentration and change their shape at 8 × 10⁻² mol dm⁻³, giving nonsymmetrical aggregates. The changes in the solution physicochemical properties at these concentrations may be misinterpreted and this explains the different values of the critical micelle concentration reported in the literature for substances with similar structure, such as bile salts. Received: 14 May 2001 Accepted: 10 August 2001     

A temperature study on critical micellization concentration (CMC), solubility, and degree of counterion binding of α-sulfonatomyristic acid methyl ester in water by electroconductivity measurements

 For a sodium salt of α-sulfonatomyristic acid methyl ester (14SFNa), one of the α-SFMe series surfactants, critical micellization concentration (CMC), solubility and degree of counterion binding (β) were determined by means of electrocon-ductivity measurements at different temperatures (at every 5 °C) ranging from 15 to 50 °C. The phase diagram of 14SFNa in pure water was constructed from the CMC- and solubility-temperature data, in which the Krafft temperature (critical solution temperature) was found around 0 °C. The changes in the Gibbs energy, ΔG ⁰ _m, enthalpy, ΔH ⁰ _m, and entropy, ΔS ⁰ _m, upon micelle formation as a function of temperature were evaluated taking βvalues into calculation. Received: 28 August 1996 Accepted: 5 November 1996     

The assessment of compliance with legal limits. Part 2. How to consider both type I and type II errors when working in the concentration domain

Considering the uncertainty of measurement when assessing compliance with reference values given in compositional specifications and statutory limits is still a controversial matter. In theory, assessing compliance requires considering both type I (false positive) and type II (false negative) errors. The more the concentration of the analyte in the sample under investigation is close to the allowed concentration limit, the more critical it is to consider both types of errors. This paper describes how this could be done. The matter is discussed in the light of the most recent literature information.