Compositional investigation of potassium doped Cu(In,Ga)Se2 solar cells with efficiencies up to 20.8%

We report on the interaction between intentional potassium doping of thin film Cu(In,Ga)Se₂ (CIGS) solar cells, CIGS absorber composition, and device efficiency. Up to now high efficiency CIGS solar cells could not be produced with a gallium/(gallium + indium) ratio higher than 35%. The new doping process step does not only increase solar cell conversion efficiencies up to 20.8%, but also allows a shift in the CIGS absorber composition towards higher gallium content whilst maintaining this high efficiencies level. We find that the saturation of the open circuit voltages for higher gallium content that is normally observed can partially be overcome by the new doping procedure. This observation leads us to the conclusion that even on this high performance level CIGS solar cells still hold a potential for further development beyond the record values reported here. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Study of Inx(O,OH,S)y buffer layer effect on CIGSe thin film solar cells

In_x(O,OH,S)_y buffer layer has been applied to Cu(In,Ga)Se₂(CIGSe) solar cell by chemical bath deposition (CBD). The cell efficiency was observed to be dependant on film growth mode of In_x(O,OH,S)_y buffer layer, which was affected by the CBD conditions such as sulfur chemical concentration and deposition time. The fabricated solar cell showing higher conversion efficiency was observed to have non-porous and uniform texture of buffer, whereas the lower conversion efficiency cells were found to have fibrous texture or detached texture of buffer. The fibrous texture and the detached texture induced high series resistance and lower shunt resistance, respectively, which all resulted in lower cell efficiency with reduced fill factor. External quantum efficiency and temperature dependence of open circuit voltage measurements revealed that the lower efficiency cells suffered from higher interface recombination loss due to the related defects.     

深圳城市气溶胶物理光学特性的观测研究

气溶胶是影响气候变化和空气污染的重要因子.在深圳地区展开气溶胶观测实验,可以获得可靠的光学物理特征,进而有助于准确评估气溶胶在新型超极城市区域的气像和环境效应.本文利用2010年12月至2011年8月太阳光度计、黑碳和浊度计等气溶胶观测资料,分析了新型超级城市深圳地区的气溶胶物理光学特性.深圳地区气溶胶呈明显季节变化,冬、春季由于城市污染性气溶胶的影响,气溶胶光学厚度和Angstrom波长指数都较大,夏季受海盐气溶胶的影响,光学厚度较小,Angstrom波长指数也较小.光学厚度与Angstrom 波长指数对比表明城市综合性污染是引起深圳气溶胶高光学厚度的主要原因.深圳地区气溶胶的散射系数、吸收系数的平均值(标准偏差)分别为178.7×10^-6 m^-1(126.6×10^-6 m^-1)和32.5×10^-6 m^-1(18.1×10^-6 m^-1),均低于珠三角腹地多年观测平均值的二分之一和国内其他大型城市观测值.而单次散射反照率为0.81,与珠三角其他地区得到的结果接近.此外,气溶胶吸收、散射和单次散射反照率呈明显日变化,可能主要受大气边界层变化的影响.     

Investigation of nonvolatile holographic storage in LiNbO3:Mn:Ce:Fe crystal

We investigate the persistent holographic recording in triply doped LiNbO₃:Mn:Ce:Fe crystals at different oxidation/reduction states. The experimental results show that there is an optimum oxidation/reduction state, which results in the best dynamic range M/#. Compared with doubly doped LiNbO₃:Ce:Fe, we found that the nonvolatile diffraction efficiency and the best dynamic range M/# obtained in triply doped samples are larger than that obtained in doubly doped samples. The reason for the increase of the crystal about the nonvolatile diffraction efficiency and the dynamic range M/# was also explained.     

Period interaction on diffraction efficiency of blazed transmission gratings

The period interaction on diffraction of the blazed transmission gratings is analyzed with a modified extended scalar theory. For one certain period, the lights reflected from the neighboring structures can be refracted by the grating facets and form two extra fields on the bottom facet of blazed transmission gratings. The effects of this period interaction versus several diffraction orders for a fixed fabrication error of blazed transmission gratings with intermediate structures are discussed for both TE and TM polarizations. The results have been compared with those obtained with finite-difference time-domain method.     

Optimization of extinction efficiency of gold‐coated polystyrene bead substrates improves surface‐enhanced Raman scattering effects by post‐growth microwave heating treatment

We report a novel post‐growth microwave treatment approach to selectively modify the surface morphologies of gold (Au) films coated on the polystyrene (PS) bead substrates for effectively improving the surface‐enhanced Raman scattering (SERS) effect on the analytes. The discrete dipole approximation (DDA) model was introduced to evaluate the enhancement effects by calculating the localized electromagnetic field distribution and extinction efficiency based on the sizes of the trenches and voids, and the surface roughness of the modified Au–PS bead substrates. The SERS performance of microwave‐modified Au–PS substrates on rhodamine 6G (Rh 6G) and saliva yields at least 10‐fold improvements in SERS intensities compared to the as‐grown substrates, which is also in agreement with theoretical predictions by DDA modeling. This work demonstrates both experimentally and theoretically the efficacy of the microwave heating treatment on modifying the Au–PS bead substrates for the realization of high SERS performance in biomedical applications. Copyright © 2009 John Wiley & Sons, Ltd.     

光纤型宽带可调连续波差频产生中红外激光器转换效率的研究

以掺镱光纤激光器为抽运源、掺铒光纤激光器后接掺铒光纤放大器为信号源,利用周期极化掺镁铌酸锂晶体,研究了全光纤化差频产生中红外激光器的转换效率特性。结果表明,抽运光和信号光偏振态影响差频产生过程的转换效率,利用偏振控制器,可将抽运光和信号光偏振方向调节到与晶体光轴方向平行,以获得高的转换效率。抽运光和信号光的光束质量既影响差频产生过程的转换效率,又决定晶体纵向位置的容限,当聚焦系统由自聚焦透镜和焦距100mm平凸透镜组成时,相对转换效率达0.717mW-2,晶体纵向位置容限为44mm。此外,差频光在3126.36~3529.6nm范围内调谐时,转换效率基本保持不变。     

空间频率对透射式全息图衍射率的影响

为研究干涉条纹空间频率与透射式全息图衍射率的关系,在相同条件下,拍摄以平面波、发散的和会聚的球面波分别作参考光、物光的透射式全息图,通过实验测量其衍射效率,同时计算了干涉条纹的空间频率。然后以会聚的球面波为物光,平面波为参考光,分别改变入射角和球面波会聚点到记录面的距离制作另外4块透射式全息图,并计算了它们的空间频率,测量了其衍射效率。结果表明：在相同条件下制作透射式全息图时,衍射效率只由空间频率决定,与使用何种参考光和物光无关,空间频率仅随参考光和物光的夹角变化而变化。     

高功率光纤激光器二级抽运技术的理论分析

从理论上分析了高功率光纤激光器直接抽运和二级抽运的斜率效率和热管理问题. 计算结果表明:波长为975 nm的激光直接抽运产生波长为1070 nm的激光时,理论斜率效率为80%,但当抽运光功率为10 kW时,在强制水冷条件下纤芯极值温度也难以降到150 ℃以下;在二级抽运技术中,波长为1018 nm的激光抽运产生波长为1070 nm的激光时,若采用传统的包层抽运技术,其斜率效率不足20%,如果抽运功率填充因子由0.0025提高到0.1,则理论上斜率效率可由18.5%提高到80.9%,从而总斜率效率由15.5 关键词： 二级抽运 功率填充因子 斜率效率 热管理     

Enhancement of light-emitting efficiency using combined plasmonic Ag grating and dielectric grating

Based on the analysis of the near-field evanescent wave in total internal reflection, the flip-chip light-emitting diode (LED) structure was proposed by placing a plasmonic Ag grating and a perforated sapphire grating in the substrate. The finite difference time domain (FDTD) method has been applied to study the spectral properties of the hybrid structure and the enhancement factor of light extraction efficiency of the LED model. From the computation examples, the effects of structure parameters on the extraction enhancement have been investigated. The results indicate that the plasmonic grating can enhance the near-field evanescent wave and couple it to propagation wave in the specific wavelength bands, which leads to the photons emitting out of the LED chip with high extraction efficiency. Due to the combined gratings used, the enhancement factor of the light extraction efficiency can reach approximately 4 times at a relatively longer wavelength.