室内模型实验中低强度桩侧应变片粘贴技术与应用

表面粗糙的桩与桩间土共同受力后发生相对位移,在低强度桩侧面有效粘贴应变片以测试轴力传递规律是一个难点.在组合群桩复合地基室内模型试验中,本文结合传统内贴法和外贴法两种贴片方式的优点,提出并采用凹槽法在低强度实心模型桩外侧面贴片,即在桩侧预留凹槽、用环氧树脂对贴片部位进行表层处理,在贴片后密封凹槽,并给出了典型测试结果.分析认为:凹槽法贴片技术有效可行,可供室内含桩地基基础模型试验借鉴.     

非一致随机分布复合材料力学参数预测的统计二阶双尺度方法

通过建立统计的二阶双尺度计算方法,预测了非一致随机分布复合材料结构的力学参数,包括刚度参数和弹性极限强度参数.所谓非一致随机分布复合材料结构,是指在整个结构中夹杂随机分布,但分布特征并不是处处相同,而是逐渐变化的,从而导致材料在宏观上具有随着位置连续变化的力学性能.描述了一致和非一致随机分布复合材料结构的特征及其细观表征方法,并建立了统计的二阶双尺度计算公式,讨论了材料的弹性极限强度准则.最后,针对不同的非一致随机分布复合材料,预测了材料的力学参数并与实验数据进行了对比.结果表明,统计的二阶双尺度方法对于预测非一致随机分布复合材料的力学参数是有效的. 关键词： 统计二阶双尺度方法 非一致随机分布 复合材料结构     

铝塑复合管的超声金属焊接

本文主要介绍了金属材料超声焊接的特点,原理分析、焊接强度与参数的关系及在铝塑复合管生产中的应用。     

Effective responses of nonlinear elliptic cylindrical composites

The higher-order dielectric responses of composites composed of weakly nonlinear elliptic cylindrical inclusions randomly embedded in linear media are investigated. The general formulae for effective DC coefficients are newly derived by the average field method up to the ninth order and then applied to analyze the effects of inclusion shapes on the effective response. The results are directly transformed to the quasi-static AC response of the composites under the sinusoidal external electric field with fundamental and third harmonic frequencies. The more general relationships between the effective DC and AC coefficients are established up to the seventh order and third harmonic, which are applicable to all weakly nonlinear isotropic composites.     

两种高分辨率数值方法计算波前有非均匀流的变截面管内激波传播规律的比较

本文采用两种对间断解具有高分辨率的数值方法基于推广Riemann问题解的二阶Godunov型有限差分法和分裂算子的随机选取法,计算了微波在波前有非均匀定常流的一维变截面管道中的传播和波后流场特征,得到一致结果,用数值模拟方法揭示了这类运动的一些特殊规律。对比两种方法的计算过程和结果,可以看出,二阶Godunov型方法明显优于随机选取法。     

The displacement wave theory of blood vessel

On the basis of the medical and mechanical analysis and explanations in this paper the visco-elastic simply supported beam model is proposed to treat the displacement wave of the blood vessels. The relationships between the displacement wave and blood vessel elasticity as well as the viscous dissipation of the blood and blood vessel are obtained. The corresponding relations of such kinds of pulses in the traditional Chinese medicine as smooth pulse, surface pulse and deep pulse to the displacement waves of blood vessels are also found. The computational results are in good agreement with those acquired in the experiments with ultrasonic wave.The Projects Supported by National Science Fundation of China.     

纺织结构复合材料的力学性能研究

从纺织几何学入手,通过对纺织结构复合材料细胞构型的分析,建立其刚度矩阵和本构关系,并结合纺织结构复合材料的损伤和演化规律分析,完整地描述纺织结构复合材料的力学特点.着重讨论物理概念和研究方法,以促进了解纺织复合材料的分析理论和它的工程应用.      

Nonideal effects behind reflected shock waves in a high-pressure shock tube

Abstract. Shock tubes often experience temperature and pressure nonuniformities behind the reflected shock wave that cannot be neglected in chemical kinetics experiments. Because of increased viscous effects, smaller tube diameters, and nonideal shock formation, the reflected-shock nonidealities tend to be greater in higher-pressure shock tubes. Since the increase in test temperature () is the most significant parameter for chemical kinetics, experiments were performed to characterize in the Stanford High Pressure Shock Tube using infrared emission from a known amount of CO in argon. From the measured change in vibrationally equilibrated CO emission with time, the corresponding ddt (or for a known time interval) of the mixture was inferred assuming an isentropic relationship between post-shock temperature and pressure changes. For a range of representative conditions in argon (24–530 atm, 1275–1900 K), the test temperature 2 cm from the endwall increased 3–8 K after 100 s and 15–40 K after 500 s, depending on the initial conditions. Separate pressure measurements using a shielded piezoelectric transducer confirmed the isentropic assumption. An analytical model of the reflected-shock gas dynamics was also developed, and the calculated 's agree well with those obtained from experiment. The analytical model was used to estimate the effects of temperature and pressure nonuniformities on typical chemical kinetics measurements. When the kinetics are fast (s), the temperature increase is typically negligible, although some correction is suggested for kinetics experiments lasting longer than 500 s. The temperature increase, however, has a negligible impact on the measured laser absorption profiles of OH (306 nm) and CH (216 nm), validating the use of a constant absorption coefficient. Infrared emission experiments are more sensitive to temperature and density changes, so nonuniformities should be taken into account when interpreting ir-emission data. Received 25 April 2000 / Accepted 8 September 2000     

Self-Similar Solutions of Fracture Dynamics Problems on Axially Symmetry

ＩｎｔｒｏｄｕｃｔｉｏｎＣｏｍｐｏｓｉｔｅｍａｔｅｒｉａｌｓａｒｅａｌｍｏｓｔｍａｄｅｕｐｏｆｆｉｂｅｒａｎｄｍａｔｒｉｘｗｉｔｈａｎｉｓｏｔｒｏｐｉｃｍａｃｒｏｓｔｒｕｃｔｕｒｅ ,ｗｈｏｓｅｖａｒｉｏｕｓｓｔｒｕｃｔｕｒｅｓａｒｅｅａｓｙｔｏａｐｐｅａｒａｐｅｎｎｙ＿ｓｈａｐｅｄｍｉｃｒｏｃｒａｃｋｉｎｔｈｅｐｒｏｃｅｓｓｏｆｔｈｅｉｒｗｏｒｋ.Ｗｈｅｎｉｔｅｘｔｅｎｄｓｇｒａｄｕａｌｌｙ ,ｔｈｅｓｔｒｕｃｔｕｒｅｗｉｌｌｌｅａｄｔｏｄｅｓｔｒｕｃｔｉｏｎ .Ｉｔｉｓｗｅｌｌ＿ｋｎｏｗｎｔｈａｔ…