石墨烯/锌铁氧体复合物的制备及抗菌性能

用氧化还原法和化学共沉淀法分别制备了石墨烯(GE)和石墨烯/锌铁氧体(GE/ZnFe2O4)复合物,通过现代测试技术表征了样品的物相结构、组成和微观形貌.以大肠杆菌、金黄色葡萄球菌和白色念珠菌为测试菌种,分别对样品的抗菌性能进行了研究.结果表明,样品的抗菌活性受GE/ZnFe2O4复合物中GE和ZnFe2O4质量比(mG/Z)以及菌种的影响,其中mG/Z=0.4的复合物对三种菌均有较好的抗菌效果,其最小抑菌浓度分别为25、25和12.5μg/mL;复合物对白色念珠菌的抗菌效果最好,这与菌种的结构有关.此外,对样品的抗菌机理进行了详细研究.     

Fractionation and Bioaccessibility of Manganese,Copper, Zinc,Cadmium, and Lead in Commercial Vegetable and Rice Baby Foods Using Inductively Coupled Plasma - Mass Spectrometry (ICP-MS) with Central Composite Design (CCD)

Abstract

Herein the bioaccessibility of Mn, Cu, Zn, Cd, and Pb, selected from essential and toxic elements, was determined in commercially sold vegetable purees intended for infant and toddler consumption. Chemical fractionation studies using water, acetone, diethyl ether, chloroform:methanol, and n-hexane were employed to predict the importance of the protein and lipid parts of a matrix to assess the bioaccessibility data. In addition, in-vitro gastrointestinal digestion was performed to determine the bioaccessibility of the elements using a five level, three factor central composite design (CCD) to maximize the elemental solubility. The total elemental concentrations in all of the fractions were determined by inductively coupled plasma – mass spectrometry (ICP-MS). Based on the consumption of one jar of vegetable/rice-based baby food, Zn was 1.3% of the recommended dietary allowance and Mn was 4.2% of the adequate intake level, while Cu was almost 100% of the adequate intake level. Additionally, Pb was always below the detection limit and Cd was sometimes under the detection limit for the percent bioaccessibility. However, in some samples, Cd was as high as 80% of the tolerable weekly intake level depending on the body weight.     

实散组合桩承载原理及应用

本文提出了实散组合桩概念,即一根桩由上下两段组成,上段是实体桩,下段是散体桩。这样就克服了散体桩通常桩头承载能力低的缺陷。本文对实散组合桩的受力概念进行了分析研究,给出了其承载力、沉降、临界桩长等计算方法和公式。最后介绍了首次工程实例。     

Multicriteria Optimal Design of a Rectangular Composite Plate Subjected to Biaxial and Thermal Loading

Multicriteria optimization of the structure and geometry of a laminated anisotropic composite plate subjected to the thermal and biaxial action is considered. From known properties of the monolayer and the given values of variable structural parameters, the thermoelastic properties of the layered composite are determined. The criteria to be optimized—the transverse critical load and the longitudinal thermal stresses—depend on two variable design parameters of composite properties and temperature. In the space of the optimization criteria, the domain of allowable solutions and the Pareto-optimal subdomain are found. __________ Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 5, pp. 683–690, September–October, 2005.     

Notions of equivalence through ratios: Students with and without learning disabilities

Students with learning disabilities (LD) specific to mathematics historically underperform in foundational content such as rational number equivalence. This study examined the strategy usage and multiplicative thinking of three third grade children (i.e., Bill, a child identified as having a learning disability specific to mathematics, Carl, a child labeled as low achieving in mathematics, and Albert, a child labeled as typically achieving) before, during, and after participating in tutoring sessions consisting of student-centered pedagogy and equivalence tasks presented through an underutilized interpretation of rational number: namely, the ratio interpretation. Constant comparison analysis of the children's work during the tutoring sessions as well as responses to tasks during two clinical interviews seemed to indicate that all three children increased their use of viable strategies, with notable differences in the sophistication of the strategies as well as the level of multiplicative thinking utilized before and after the ratio-based tutoring sessions. Yet, Bill's continued use of rudimentary strategies reflects a need for continued research to investigate why the use of such strategies persists and how supporting the development of more sophisticated strategies (especially among children with LD) can be achieved.     

连续纤维增强含二氮杂萘酮联苯结构聚芳醚砜酮树脂基复合材料的界面

利用射频感性耦合冷等离子体(ICP)处理技术改性连续纤维表面,分别采用X射线光电子能谱(XPS)、原子力显微镜(AFM)及动态接触角分析(DCA)系统研究了等离子体处理时间、放电气压、放电功率等工艺参数对连续碳纤维、芳纶纤维和对亚苯基苯并二噁唑(PBO)纤维的表面化学成分、表面形貌、表面粗糙度及表面自由能的影响.研究结...     

疏水缔合聚丙烯酰胺与双子表面活性剂的自组装

通过荧光光谱、动/静态激光光散射研究了疏水缔合聚丙烯酰胺(HAPAM)自组装行为及双子表面活性剂(双十四酸乙二酯双磺酸盐(DMES-14))对其的影响.实验结果表明:聚合物HAPAM在溶液中能够通过自组装形成疏水微区,表现出芘的发射光谱中第一振动峰(373nm)与第三振动峰(383nm)的荧光强度之比(I1/I3)值随聚合物浓度的增大而下降,当聚合物HAPAM浓度(CP)达到一定值后,I1/I3值不再变化;当加入表面活性剂时,HAPAM能够与双子表面活性剂在溶液中形成混合胶束,在聚合物浓度一定时,I1/I3值随表面活性剂浓度(CS)的增大急速下降,当表面活性剂浓度达到30mg·L-1时,I1/I3值趋于恒定;当表面活性剂浓度一定时,聚合物/表面活性剂二元体系中聚集体的聚集数随HAPAM浓度的增大出现先下降再增加的过程;一定量的双子表面活性剂对HAPAM分子间的缔合起促进作用,过量的双子表面活性剂对HAPAM分子间的缔合起抑制作用,使HAPAM的表观重均分子量(Mw,a)、均方根回转半径()和流体力学半径()随表面活性剂浓度增加先增大后减小,而HAPAM的/比值则随表面活性剂浓度增大出现一定程度的上升,表明HAPAM分子链段变得相对舒展.     

充分发展湍流场中Pr数对被动标量输运的影响

采用直接数值模拟方法,研究壁湍流中分子Pr数对湍流被动标量输运的影响.发现在槽道湍流的外层,湍流雷诺平均普朗特数PrT与分子普朗特数的倒数呈线性关系;湍流亚格子普朗特数PrT与分子普朗特数的关系较为复杂,在分子普朗特数为1附近时,湍流亚格子Prt数出现极小值.