Interactions of Some Amino Acids with Aqueous Tetraethylammonium Bromide at 298.15 K: A Volumetric Approach

The apparent molar volumes, V_,2, of glycine, L-alanine, DL--amino-n-butyric acid, L-valine, and L-leucine have been determined in aqueous 0.25, 0.75, 1.0, and 1.5 mol-dm^–3 tetraethylammonium bromide (TEAB) solutions by density measurements at 298.15 K. These data have been used to calculate the infinite dilution apparent molar volumes, V_2,m, for the amino acids in aqueous tetraethylammonium bromide and the standard partial molar volumes of transfer (_tr V_2,m) of the amino acids from water to the aqueous salt solutions. The linear correlation of V_2,m for a homologous series of amino acids has been utilized to calculate the contribution of the charged end groups (NH₃⁺, COO^–), CH₂ group, and other alkyl chains of the amino acids to V_2,m. The results of the standard partial molar volumes of transfer from water to aqueous tetraethylammonium bromide have been interpreted in terms of ion–ion, ion–polar, and hydrophobic–hydrophobic group interactions. The volume of transfer data suggest that ion–ion or ion–hydrophilic interactions are predominant in the case of glycine and alanine, and hydrophobic–hydrophobic group interactions are predominant in the case of DL--amino butyric acid, L-valine, and L-leucine.     

长链烷基苯异构体的气相色谱研究

长链烷基苯异构体的分离分析是石油化学中一个重要课题,曾有较多作者用气相色谱方法研究了长链烷基苯的分离及不同碳数的     

室温熔盐二(三氟甲基磺酸酰)亚胺锂-尿素体系的分子动力学模拟

应用分子动力学模拟了25 ℃和50 ℃时新型室温熔盐二(三氟甲基磺酸酰)亚胺锂[LiN(SO2CF3)2, LiTFSI]与尿素(摩尔比为1:3.6)体系的结构与动力学性质. 在两个温度下体系的微观结构基本相同, Li+的配位数约为5, 且都是与溶剂和阴离子中的氧原子发生配位. 对TFSI-的研究表明, 每个TFSI-只提供四个氧中的一个与Li+配位; 而且在Li+的配位层中, TFSI-具有顺、反和gauche 等不同的构象, 并且不同构象出现的几率会随着温度的改变而改变.     

Structure and properties of the Nafion—polyaniline—palladium composite electrodes

Effect of conditions of deposition of palladium onto a composite polymeric film Nafion—polyaniline on the properties of the system thus obtained is studied. It is shown that the effect of the said conditions on the character of distribution of palladium in a polymer may be used when estimating electrocatalytic potentialities of such composites.Translated from Elektrokhimiya, Vol. 41, No. 2, 2005, pp. 213–218.Original Russian Text Copyright © 2005 by Andreev, Zolotarevskii.This revised version was published online in April 2005 with corrections to the article note and article title and cover date.     

四苯硼钠-甲苯胺蓝缔合物纳米微粒体系减色效应研究

在PH4.0醋酸-醋酸钠介质中，甲苯胺蓝在600nm处有一个吸收峰，随着四苯硼钠浓度的增大甲苯胺蓝在600nm处吸收峰降低，颜色减弱，这是由于甲苯胺蓝-四苯硼钠缔合物分子间存在较强的疏水作用及分子间作用力，聚集形成纳米微粒所致，甲苯胺蓝-四苯硼钠纳米微粒体系亦在600mm处有1个吸收峰，在400mm、470mm和580mm处产生3共振散射峰，其中400mm和580mm为甲苯胺蓝-四苯硼钠复合纳米微粒产生的特征共振散射峰，这也表明有纳米微粒存在，丙酮浓度的影响实验结果等表明，纳米微粒的形成是产生其减色效应的原因。     

LSGMC5含量对于二甲醚燃料电池复合Ni-Fe阳极性能的影响

用浸渍法制备了掺杂不同质量分数的La0.8Sr0.2Ga0.8Mg0.15Co0.05O3-δ (LSGMC5)粉末的Ni8-Fe2-LSGMC5复合阳极, 并采用交流阻抗和直流极化技术考察了以氢气和二甲醚为燃气时该复合阳极的电化学性能及相应电池的功率输出特性. 结果表明, 在电极中掺入LSGMC5 粉末, 能显著地改善电极的形貌和电极/电解质界面结构, 减小欧姆电阻和极化电阻. 电极中LSGMC5 粉末含量对于氢气及二甲醚电化学氧化性能的影响显著不同. 以二甲醚为燃气时, 电极极化电阻随LSGMC5 粉末含量的增加而减小, 其中LSGMC5 掺杂量为30%的复合阳极具有最高的电化学性能, 相应电池在1073、1023、973 K 时的输出功率分别为1.00、0.61、0.40 W·cm-2; 以氢气为燃气时, LSGMC5 掺杂量为20%的复合阳极具有最好的电化学性能, 随着LSGMC5 掺杂量的进一步增加, 电极极化电阻显著增大.     

聚酰亚胺／聚N－乙烯吡咯烷酮分子复合物的合成和表征

由原位缩聚制备了刚性高分子聚酰亚胺（ＰＩ）和柔性基体聚Ｎ－乙烯吡咯烷附（ＰＶＰ）的分子复合物，并由实验证明了中间体聚酰胺酸（ＰＡ）和聚乙烯吡咯烷酮大分子之间存在的酸一碱相互作用．这种相互作用促进了混容性，使聚酰亚胺能以分子水平或接近分子水平分散在聚毗咯烷酮的基体之中．聚酰亚胺／聚Ｎ－乙烯吡咯烷团分子复合物的薄膜呈透明性，在整个组成范围内只有一个Ｔｇ，显示单相行为。当ＰＩ含量＜２０％时，ＳＥＭ相片呈现均相形貌，看不到ＰＩ微晶．广角Ｘ－ｒａｙ衍射图表明ＰＩ特征结晶峰消失，和无定形的ＰＶＰ完全混容．当ＰＩ含量＞４０％，ＳＥＭ显示有均匀分布的、棒状ＰＩ微晶存在．通过分子复合，即使ＰＩ含量为１０％，聚Ｎ－乙烯吡咯烷酮不再溶于乙醇，耐热性也有提高．     

LiNi0.8Co0.2O2 / MWNTs复合物超级电容器电极材料的研究

Multiwalled carbon nanotubes (MWNTs) were used as the conductive additive in the electrode materials. The electrochemical properties of supercapacitors based on LiNi_0.8Co_0.2O₂ / MWNTs composite and LiNi_0.8Co_0.2O₂/acetylene black composite and MWNTs in 1.0 mol·L^-1 LiClO₄ / EC+DEC [V(EC)∶V(DEC)=1∶1] electrolyte were investigated by means of constant charge/discharge current tests, respectively. The experimental results show that the LiNi_0.8Co_0.2O₂ / MWNTs composite has better performance than that of others, and the maximum specific capacitance of the supercapacitor can reach 271.6 F·g^-1, while the energy density is up to 339.5 Wh·kg^-1. Furthermore, it is remarkable that the performance of MWNTs is better than that of acetylene black as the conductive additive.     

Effect of monomer molecular flow on electrode surface on the structure of poly(α-tetrathiophene) obtained by anodic polymerization

Different structures have been found for poly(α-tetrathiophene) [poly(α-4TF)] electrosynthesized on Pt by anodic oxidation of 1.0 mM monomer solutions in media such as 45:35:20 (v/v/v) acetonitrile/THF/DMF, 45:35:20 (v/v/v) acetonitrile/ethanol/DMF and 72:28 (v/v) acetonitrile/DMF containing 0.1 M LiClO₄; as well as 72:28 (v/v) acetonitrile/DMF with 0.1 M NaClO₃, under dynamic and static conditions at 25 °C. In all cases the polymer was generated by chronoamperometry at 1.000 V vs. Ag∣AgCl, corresponding to the first oxidation peak detected by cyclic voltammetry. Uniform, adherent, insoluble and black polymer films were obtained under these conditions. The resulting structures have been elucidated by combining the information of their IR spectrum, n_ox-value and doping level of the counterion. The degree of crosslinking of every polymer has been quantified and related to the molecular flow of monomer on the Pt electrode. A monomer concentration flow between 4 × 10⁻⁶ and 5 × 10⁻⁶ mmol cm⁻² s⁻¹ was determined as the limiting value below which the polymer grows with crosslinking. This value corresponds to the electropolymerization rate of α-4TF by Pt area unit at 25 °C.     

Determination of degree of conversion as a function of depth of a photo-initiated dental restoration composite—III application to commercial Prodigy Condensable™

In this third work, we evaluated the degree of conversion (DC) versus depth of dental filling composite named Prodigy Condensable™ using infrared spectroscopy. Confirming previous results, there was a gradual reduction of DC with increasing depth but the composite exhibited extreme values of DC, an upper value (45.9%) on the surface and a lower one (6.1%) at a depth of 5 mm. The composite presented the worst performance among materials studied. The composite formulation was 80% of inorganic fillers and BisfenolA/dimethacrylate (BisGMA) (18%)/triethyleneglycoldimethacrylate (TEGDMA) (2.0%) as monomers. As stated before, type/ratio/viscosity of monomers and type, amount, size and size distribution of fillers all together had an important role in the cure reaction contributing to the final performance of the composite.