面向LOFAR应用的160Gbit/s OTDM试验平台

报告了一个用于低频射频天线网络LOFAR的160 Gbit/s 演示平台.文章介绍了LOFAR网络结构以及用于LOFAR长臂的OTDM/WDM系统结构,回顾并探讨了用于实现160 Gbit/s系统的关键技术,并介绍了实验室中实现该160 Gbit/s OTDM/WDM演示平台所采用的技术方案。出于经济性考虑,所有的关键系统功能都采用自己搭建方案.     

三类偏振模色散模拟器的多阶特性和频率统计相关性分析

对现有三类偏振模色散模拟器：旋转晶体型、偏振控制器型和加热器型模拟器,进行了详尽的相关群时延、高阶偏振模色散的统计分布和频率自相关函数三大统计特性的数值模拟和性能比较.以级联段数作为主要参量的分析结果表明：相关群时延分布的产生准确度,旋转晶体型模拟器略优于偏振控制器型,而加热型模拟器相对最差;在产生精确的高阶偏振模色散分布方面,偏振控制器型模拟器最为优越,加热型模拟器略优于旋转晶体型;而对于产生较低的频率自相关本底水准方面,加热型模拟器则优于偏振控制器型和旋转晶体型.综合而言,偏振控制器型模拟器的性能最为优越;十段左右的偏振控制器型模拟器就可以产生合格的模拟效果,其效果等价于十五段以上旋转晶体型,或二十段以上加热型模拟器.     

交通运输质量综合评价方法的研究

交通运输业是一个服务特征非常明显的企业，它的生产过程和产品具有一定的特殊性，本根据运输市场规律和生产实际建立了24个指标，以此为基础对运输计划子质量、生产子质量和产品子质量三个子质量进行了定量评价，再以三个子值为基础对运输质量进行了定量综合评价，算例分析表明，该评价方法具有一定的实用价值。     

移动通信GSM系统用前向耦合型高温超导滤波器

本文设计并研制了一种GSM180 0移动通信基站接收机前端用高温超导滤波器 .滤波器选用集成度、性能均很好的前向耦合型微带结构 ,中心频率 1732 .5MHz ,通带带宽 4 5MHz .测试结果表明 :该滤波器具有很好的频率响应特性 ,与设计结果符合得很好 .在温度T =30K时 ,该滤波器的带内最大插损 <0 .5dB ,带内纹波 <0 .4dB ,反射损耗好于 10dB .文中也给出了不同温度下滤波器的频率响应特性 .     

Analysis of a New Method of Dispersion-Supported Transmission for Dispersion Compensation

１ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅａｐｐｌｉｃａｔｉｏｎｏｆｅｒｂｉｕｍｄｏｐｅｄｆｉｂｅｒａｍｐｌｉｆｉｅｒｓ（ＥＤＦＡｓ）ｉｎｈｉｇｈｂｉｔｒａｔｅｏｐｔｉｃａｌｔｒａｎｓｍｉｓｉｏｎｓｙｓｔｅｍｓｏｐｅｒａｔｉｎｇａｔ１．５５μｍｈｅｌｐｓｔｏｏ...     

Tunable 2D time-wavelength optical CDMA encoder for differentiated service provisioning

We propose and demonstrate a reconfigurable tunable encoder for two-dimensional time-wavelength optical code division multiple access (OCDMA). This encoder is capable of creating 2D codes with variable code weight, enabling differentiated service provisioning. The demonstrated novel scheme uses ultra-fast optical delay lines and all-optical sampling while operating at 115 Gchip/s. Our proposed architecture provides an all-optical method of varying the code weight on a bit-per-bit basis, while maintaining the core architecture of a tunable OCDMA encoder.     

Twin-hollow-core optical fibres

Twin-hollow-core microstructured optical fibres have been fabricated and characterised for the first time. The fibre cladding structure results in guidance by the inhibited coupling mechanism, in which there is a low overlap between the core modes and surrounding structure. This results in minimal interaction between the modes of each core in the transmission bands of the fibre and hence minimal coupling between the cores. It is shown that light is able to couple between the cores via coupling to cladding struts in the high loss wavelength bands.     

光信息科学与技术专业实验室建设探讨

根据同济大学光信息科学与技术专业的教学计划,同时结合我校的科研条件,筹建了相应的专业实验室。介绍了同济大学光信息科学与技术专业实验室建设过程中的规划和7类实验项目的内容和意义,如光谱学系列实验、光学系统CAD设计系列、光学薄膜CAD设计系列、光学薄膜特性测试实验、激光系列实验、光电基础和光电探测系列实验和光纤光学与光纤通信系列实验。     

Repetition rate multiplication in figure-eight fibre laser with 3 dB couplers

The operation of a passively modelocked figure-eight laser with all fibre repetition rate multiplier is reported. Thirty two times the fundamental repetition rate is achieved with six conventional 3 dB couplers at a repetition rate of 182 MHz. The repetition rate 2^N times multiplication only requires (N + 1) passive fibre couplers and N fibre delay-lines. This method makes it possible to achieve high multiplication and is inexpensive when compared with conventional methods employing sub-ring cavity or special fibre Bragg grating to control repetition rate.     

Multi-wavelength conversion at 10 Gb/s using cross-phase modulation in highly nonlinear fiber

In this paper we demonstrate a technique of signal wavelength conversion via cross-phase modulation (XPM)-induced nonlinear coupling among a 10 GHz return-to-zero (RZ) signal and a continuous wave (CW) carrier co-propagating in dispersion-shifted (DS) highly nonlinear fiber (HNLF). The wavelength conversion bandwidth up to ±20 nm was achieved experimentally and potential extension was verified by numerical simulations. The principle can easily be extended to 40 Gb/s and used as polarization insensitive all-optical wavelength converter.