A refined numerical model for determining inflation-burst behavior of composite membrane structures

The airship structures made of multi-layer composite fabrics or membranes can offer the platform for earth observations, wireless communications and space research due to light weight and good mechanical performance. The structural safety and serviceability strongly depend on material properties and working conditions. Available studies are limited within service stress limits or are lack of suitable biaxial tensile constitutive models for understanding structural behavior. This paper thus focuses on a refined numerical model for determining inflation-burst behavior of composite airship structures considering new biaxial constitutive equations, novel failure criteria and manufacture factors.The differences between ideal and real forms of airship structures, e.g. volume difference, demonstrate the necessity for incorporating cutting-pattern effects in the initial numerical model. For structural analysis, stress distributions on real structural forms are different from those on ideal forms because of welding parts that can enhance local stiffness. The ultimate pressures are 56.7 kPa and 59.5 kPa for ideal and real structural forms. Structural breaking initiated at the maximum diameter of ideal structural forms propagates fast while welding parts can prevent breaking propagation for real structural forms. Therefore, the refined numerical model can reveal basic structural behavior and safety performance of airship structures in the inflation-burst processes.     

Biobased PLA/NR-PMMA TPV with balanced stiffness-toughness: In-situ interfacial compatibilization,performance and toughening model

Using rubber to toughen polylactide (PLA) is always accompanied by the sharp reduction in stiffness. Herein, PLA/poly (methyl methacrylate) grafted natural rubber (NR-PMMA) thermoplastic vulcanizates (TPVs) with balanced stiffness-toughness were fabricated. With the addition of 40 wt % NR-PMMA, the impact strength and tensile toughness of PLA/NR-PMMA TPV significantly improved to about 102.7 kJ/m² and 66.1 MJ/m³, respectively, compared with those of 2.7 kJ/m² and 2.4 MJ/m³ for the pure PLA. Meanwhile, the yielding stress was maintained at 34.5 MPa. Fourier transform infrared spectroscopy (FTIR) confirmed the formation of in-situ interfacial compatibilization between PLA and rubber phases. Both tensile and impact toughening mechanism were studied and deduced as considerable energy dissipation provided by the continuous rubber phase. Instrumented notched impact tests demonstrated that the energy dissipating in crack propagation process contributed to the main part of impact toughness. In addition, a novel toughening model based on bicontinuous structure was incorporated, which showed good applicability in predicting the impact strength of PLA/NR-PMMA TPVs.     

Multiscale characterization and constitutive parameters identification of polyamide (PA12) processed via selective laser sintering

This study is focused on multiscale characterization and constitutive parameters identification of selectively laser sintered PA12 specimens. The process parameters and change in crystallinity due to 3D printing were identified via differential scanning calorimetry (DSC). Tension, compression, shear, flexural and fracture tests performed on samples fabricated, both in 0° and 90° directions reveal that the tensile toughness of samples printed in 0° orientation, outperform samples printed in 90° orientation by an average of 24%. Cryogenically fractured samples were analyzed via SEM and micro-computed tomography to analyze 2D/3D defects and correlate the microstructure with macroscopic properties. The constitutive parameters for a strain-rate and temperature-dependent Three Network (TN) material model were identified using the measured mechanical properties. Furthermore, mechanical response of micro-architected Kelvin lattice structure was analyzed by Finite Element Method employing the TN constitutive model and the predictions were corroborated with measurements.     

A five-parameter fractional derivative temperature spectrum model for polymeric damping materials

To capture viscoelastic behavior of polymeric damping materials based on limited dynamic mechanical analysis tests, a simple fractional temperature spectrum model representing the viscoelastic materials is proposed in this paper and experimental tests aims at stressing the validity of the model. The storage modulus, the loss modulus, and the loss factor, are established based on the five-parameter fractional derivative model and the time–temperature superposition principle. The dynamic mechanical tests of two polymeric materials are carried out to verify this temperature spectrum model. Results indicate a good agreement between the temperature spectrum model and experimental tests at various temperature conditions. Furthermore, thermodynamic coupling of the viscoelastic material is investigated by temperature rise calculation and vibration experiment test. Comparison analysis shows that the temperature rise model can simulate the temperature rise process for the shear vibration of the constrained damping, which provide references for the damping capability, thermal damage and failure of viscoelastic material.     

Effect of working temperature on the interfacial behavior of overmolded hybrid fiber reinforced polypropylene composites

In the present study, the interfacial behavior of overmolded hybrid fiber reinforced polypropylene composites (hybrid composites) in the working temperature range from 23 °C to 90 °C was studied by experimental and constitutive methods. Monotonic and cycle loading-unloading single-lap-shear tests were employed to determine the interfacial properties of hybrid composites. The experimental results show that both interfacial shear strength and shear stiffness decrease with increasing working temperature. A regression function was adopted to evaluate the decaying degree of interfacial properties with increasing working temperature. The shear stress-displacement relationship under monotonic loading exhibits nonlinear behavior after an initial elastic region. The envelope lines of shear stress-displacement of hybrid composites under cyclic loading indicate that the nonlinearity in the curve is caused by the plastic deformation of polypropylene in the interphase region. A constitutive model was built to describe the nonlinear shear stress-displacement relation of hybrid composites at different working temperatures. A full suite of temperature-dependent plastic parameters in the model was obtained from cyclic loading-unloading tensile tests. The predicted shear stress–displacement curves agreed well with experimental results from different working temperatures. In addition, the failure mode of hybrid composites varied with working temperature.     

Ab-initio molecular dynamics and hybrid explicit-implicit solvation model for aqueous and nonaqueous solvents: GFP chromophore in water and methanol solution as case study

Solute–solvent interactions are proxies for understanding how the electronic density of a chromophore interacts with the environment in a more exhaustive way. The subtle balance between polarization, electrostatic, and non-bonded interactions need to be accurately described to obtain good agreement between simulations and experiments. First principles approaches providing accurate configurational sampling through molecular dynamics may be a suitable choice to describe solvent effects on solute chemical–physical properties and spectroscopic features, such as optical absorption of dyes. In this context, accurate energy potentials, obtained by hybrid implicit/explicit solvation methods along with employing nonperiodic boundary conditions, are required to represent bulk solvent around a large solute–solvent cluster. In this work, a novel strategy to simulate methanol solutions is proposed combining ab initio molecular dynamics, a hybrid implicit/explicit flexible solvent model, nonperiodic boundary conditions, and time dependent density functional theory. As case study, the robustness of the proposed protocol has been gauged by investigating the microsolvation and electronic absorption of the anionic green fluorescent protein chromophore in methanol and aqueous solution. Satisfactory results are obtained, reproducing the microsolvation layout of the chromophore and, as a consequence, the experimental trends shown by the optical absorption in different solvents.     

线性响应和两种态特定方法模拟AF350电子跃迁的溶剂效应

在极化连续模型框架下比较了线性响应与两种不同态特定方法计算的溶液中Alexa Fluor 350(AF350)分子激发能和光谱移动值的差异. AF350的第一激发态S0→S1电子跃迁属于π→π^*跃迁, 主要对应于最高占据分子轨道(HOMO)到最低空轨道(LUMO)的跃迁. 该分子激发态偶极矩大于基态偶极矩, 激发态时溶质溶剂相互作用比基态时更强, 随着溶剂极性增大, 会发生光谱红移的现象. 与实验值相比, 线性响应和两种态特定方法均高估了激发能, 其中以IBSF(Improta-Barone-Scalmani-Frisch)方法得到的激发能最小, 矫正的基态反应场方法(cGSRF)得到的激发能最大. 对于光谱移动值, 3种方法与实验值相比都偏小, 线性响应方法(LR)计算出的误差最大, 而IBSF方法得到的结果与实验值最吻合, 是预测溶液中AF350分子激发能和光谱移动值最准确的方法. 对比了Marcus传统理论和基于约束平衡的非平衡溶剂化理论的结果, 发现后者得到的激发能和光谱移动值更接近于实验值.     

Shannon entropy as a predictor of avoided crossing in confined atoms

Avoided crossing is one of the unique spectroscopic features of a confined atomic system. Shannon information entropy of the ground state and some of the excited states of confined H atom as a predictor of avoided crossing is studied in this work. This is accomplished by varying the strength of the confinement and examining structure properties like ionization energy and Shannon information entropy. Along with the energy level repulsion at the avoided crossing, Shannon information entropy is also exchanged between the involved states. This work also addresses a question: In addition to that regarding localization, what other property of the system can be extracted from Shannon entropy? Insightful connection is discovered between Shannon entropy and the average value of confinement potential, Coulomb potential, and kinetic energy.     

A novel model for quantification of the moisture absorption of polymeric laminated composites

In the present study, a new model was developed that considers the amount of the environmental fluid absorption by different constituents of polymeric laminated composites including fibers, resin, fiber-matrix interphase region, ply interface region, and voids. By knowing the fluid absorption behavior of the composite constituents, the present model can predict the amount of fluid absorption of different constituents of polymeric laminated composites with an arbitrary resin volume fraction and stacking sequence. Test specimens were fabricated by glass fibers and vinyl ester resin. The environmental fluids, examined in this study, were distilled and saline water under different temperatures and salt concentrations. To investigate the absorption behavior of different constituents of polymeric composite, various tests were conducted on fibers, pure cured resin, unidirectional composite specimens, and laminated composites. Based on the results of the tests, a new theoretical model was developed to quantify and predict the amount of fluid absorption of different constituents of laminated polymeric composites. The thickness of the interphase region between the fiber and matrix was also measured using the scanning electron microscope (SEM) images and nano-indentation tests. The consistency of experimental results with the outcomes of the theoretical model indicates the accuracy of the model.