软骨细胞体外增殖去分化的拉曼光谱分析

基于显微拉曼光谱技术,对组织工程的软骨种子细胞在传代增殖过程中的去分化进行单细胞分析。首先,对体外单层培养的第1-4代(P1-P4)大鼠软骨细胞样本进行了单细胞拉曼光谱检测,由此识别出软骨细胞中各种碱基、糖基、氨基酸等主要物质分子结构的特征峰集合。随后,分析拉曼光谱中若干重点特征峰强度随细胞传代次数的变化,发现软骨细胞体外增殖过程中核酸(789、1094、1576 cm~(-1))含量降低、Ⅱ型胶原(特异组分为羟脯氨酸,1207 cm~(-1))和蛋白聚糖(特异组分为糖胺聚糖,1042、1063、1126、1160 cm~(-1))合成下降、脂质(1304 cm~(-1))及磷酸盐(957 cm~(-1))含量增加等分子水平变化,从而在活体单细胞层次初步揭示了去分化引起软骨细胞增殖变缓、分泌减弱、形态纤维化等现象的分子机制。     

无定型钼硫化物/还原氧化石墨烯的辐射合成及其电催化析氢性能

钼硫化物被认为是一种高效的电催化析氢反应的催化剂,因此其合成方法受到了广泛的研究和关注。本文以四硫代钼酸铵和氧化石墨为前驱体,利用γ射线对其辐照还原,一步法制备了钼硫化物/还原氧化石墨烯(Mo S_x/RGO)复合材料。通过X射线光电子能谱、X射线衍射、透射电子显微镜、Raman光谱等表征手段确认复合材料中的Mo Sx为无定型结构,且氧化石墨烯得到了有效的还原。同时系统研究了吸收剂量、前驱体配比对复合材料作为析氢反应催化剂性能的影响。结果发现,Mo Sx/RGO复合材料具有优异的催化性能,其催化起始电压为110 m V,在电流密度为10 m A·cm~(-2)时过电势仅为160 m V,Tafel斜率为46 m V·dec~(-1),说明该催化剂催化析氢机理为Volmer-Heyrovesy机理。此外,Mo Sx/RGO复合材料还具有良好的催化稳定性。     

衍生化β-环糊精手性固定相高效液相色谱法拆分米那普仑对映体及其分离机制

建立了新型抗抑郁药米那普仑在环糊精手性固定相上的高效液相色谱拆分方法。在反相色谱条件下采用未衍生化β-环糊精(Cyclobond I 2000)、乙酰基-β-环糊精(AC-β-CD)、2,3-二甲基-β-环糊精(DM-β-CD)、3,5-二甲基苯基氨基甲酸酯-β-环糊精(DMP-β-CD)4种手性柱分离米那普仑对映体。考察了固定相、流动相比例、pH、流速和柱温对拆分的影响。利用分子对接和结合能计算方法,研究米那普仑分子与AC-β-CD的对接过程,探讨其可能的分离机制。优化后的拆分条件如下:固定相为乙酰基-β-环糊精手性柱Astec CYCLOBONDTMI 2000 AC(25 cm×4.6 mm,5μm),流动相为乙腈-0.1%(体积分数)pH 5.0醋酸三乙胺溶液(TEAA)(5∶95,v/v),流速为0.4mL/min,柱温为25℃,检测波长为220 nm。在此条件下,米那普仑对映体获得快速拆分,分离度(Rs)为1.74,理论塔板数为10 125。分子模拟结果表明引起手性识别的作用力主要是环糊精衍生化的乙酰基导致的氢键作用差异。该方法快速、高效、重现性好。     

单分子水对CH_2SH+NO_2反应机理影响的理论研究

在B3LYP/6-311++G(2df,p)水平下对单分子水参与下的CH_2SH+NO_2反应的微观机理进行了研究.为了获得更准确的能量信息,采用HL复合方法和CCSD(T)/aug-ccpvtz方法进行单点能校正.结果表明,加入单分子水后的CH_2SH+NO_2反应体系,共经过10条不同的反应路径,得到6种反应产物.与裸反应(CH_2SH+NO_2)相比,水分子在反应中起到了明显的正催化作用.不仅使生成产物trans-HONO的能垒(-52.84kJ·mol~(-1))降低了176.94kJ·mol~(-1),而且不需经过复杂的重排和异构化过程便可得到产物cis-HONO.在生成产物cis-HONO通道(Path3和Path4)中,活化能垒分别为143.65和126.70kJ·mol~(-1),而其裸反应的活化能垒却高达238.34kJ·mol~(-1).生成HNO_2的通道中(Path5和Path6)活化能垒分别为295.23和-42.19kJ·mol~(-1).其中Path6的无势垒过程使HNO_2也成为该反应的主要产物.另外,单分子水还可通过氢迁移的方式直接参与CH_2SH+NO_2的反应,活化能垒(TS7-TS10)分别为-10.62,151.03,186.22和155.10kJ·mol~(-1).除直接抽氢通道中的(Path8-Path10)外,其余反应通道均为放热反应,在热力学上是可行的.     

Ag@AgI/Ni薄膜的制备及其模拟太阳光催化性能

采用电化学方法制备Ag@AgI/Ni表面等离子体薄膜催化剂,使用扫描电镜(SEM),X射线衍射(XRD)和紫外-可见漫反射光谱(UV-Vis DRS)对薄膜的表面形貌、晶体结构、光谱特性以及能带结构进行分析表征,在模拟太阳光照射下,把罗丹明B作为模拟污染物对薄膜的光催化活性与稳定性进行评价,采用向反应体系中加入活性物种捕获剂的方法对薄膜光催化机理进行探究。结果表明:最佳工艺下制备的Ag@AgI/Ni薄膜表面是由附着少量Ag粒子的AgI纳米晶构成。薄膜具有显著的表面等离子共振作用、优异的光催化活性和突出的光催化稳定性。光催化反应60 min,薄膜对罗丹明B的降解率(81.1%)是AgI/Ni薄膜的1.35倍,是TiO_2(P25)/ITO薄膜的1.61倍。在薄膜光催化活性基本保持不变的前提下可循环使用5次。薄膜表面纳米Ag的等离子共振对光阴极反应的活化是光催化性能提高的重要原因。提出了薄膜光催化降解罗丹明B的反应机理。     

Glass fabrics self-cracking catalytic growth of boron nitride nanotubes

Glass fabrics were used to fabricate boron nitride nanotubes (BNNTs) with a broad diameter range through a combined chemical vapor deposition and self-propagation high-temperature synthesis (CVD-SHS) method at different holding times (0min, 30min, 90min, 180min and 360min). SEM characterization has been employed to investigate the macro and micro structure/morphology changes of the glass fabrics and BNNTs in detail. SEM image analysis has provided direct experimental evidences for the rationality of the optimized self-cracking catalyst VLS growth mechanism, including the transformation situations of the glass fabrics and the BNNTs growth processes respectively. This paper was the further research and compensation for the theory and experiment deficiencies in the new preparation method of BNNTs reported in our previous work. In addition, it is likely that the distinctive self-cracking catalyst VLS growth mechanism could provide a new idea to preparation of other inorganic functional nano-materials using similar one-dimensional raw materials as growth templates and catalysts.     

循环取货模式下的多车场协同运输问题研究

分析循环取货模式和协同运输问题的关联性,提出了供需节点分离下的多车场一体化协同运输路线优化问题,考虑运输价值和运输成本,引入节点-弧流量的概念,通过比较流量大小确定节点集合,构建了问题的多供应点、多需求点运输模型.考虑取货的单向性和送货的闭合性,构造了求解模型的两阶段算法,运用动态规划的递推解法确定取货最优路线,然后基于余弦定理的几何法求解出发点和返回点不相同的送货路径优化问题,最后通过算例分析,说明了模型的合理性和算法的有效性.     

区域低碳协同发展评价:京津冀、长三角和珠三角城市群的比较分析

京津冀、长三角和珠三角城市群是中国经济高度发达、最具发展潜力的区域,在低碳发展方面起到引领作用.从经济、资源、环境和绩效的角度构建区域低碳协同发展评价指标体系,采用结合逼近理想解的TOPSIS方法、灰色关联理论和距离协同模型,利用2005~2014年三大城市群50个城市数据实证分析了三大城市群的低碳协同发展程度.结果表明,三大城市群低碳协同发展度整体上呈现上升趋势,其低碳协同程度从高到底依次为长三角、珠三角和京津冀城市群.     

Effect of water on the retention on diol and amide columns in hydrophilic interaction liquid chromatography

The amount of water adsorbed on polar columns plays important role in hydrophilic interaction liquid chromatography. It may strongly differ for the individual types of polar columns used in this separation mode. We measured adsorption isotherms of water on an amide and three diol‐bonded stationary phases that differ in the chemistry of the bonded ligands and properties of the silica gel support. We studied the effects of the adsorbed water on the retention of aromatic carboxylic acids, flavonoids, benzoic acid derivatives, nucleic bases, and nucleosides in aqueous‐acetonitrile mobile phases over the full composition range. The graphs of the retention factors versus the volume fraction of water in mobile phase show “U‐profile” characteristic of a dual hydrophilic interaction–reversed phase retention mechanism. The minimum on the graph that marks the changing retention mechanism depends on the amount of adsorbed water. The linear solvation energy relationship model suggests that the retention in the hydrophilic interaction liquid chromatography mode is controlled mainly by proton–donor interactions in the stationary phase, depending on the column type. Finally, the accuracy of hydrophilic interaction liquid chromatography gradient prediction improves for columns that show a high water adsorption.     

Theoretical Investigation on Photoionization and Dissociative Photoionization of Toluene

The photoionization and dissociation photoionization of toluene have been studied using quantum chemistry methods.The geometries and frequencies of the reactants,transition states and products have been performed at B3LYP/6-311++G (d,p) level,and single-point energy calculations for all the stationary points were carried out at DFT calculations of the optimized structures with the G3B3 level.The ionization energies of toluene and the appearance energies for major fragment ions,C₇H₇⁺,C₆H₅⁺,C₅H₆⁺,C₅H₅⁺,are determined to be 8.90,11.15 or 11.03,12.72,13.69,16.28 eV,respectively,which are all in good agreement with published experimental data.With the help of available published experimental data and theoretical results,four dissociative photoionization channels have been proposed:C₇H₇⁺+H,C₆H₅⁺+CH₃,C₅H₆⁺+C₂H₂,C₅H₅⁺+C₂H₂+H.Transition structures and intermediates for those isomerization processes are determined in this work.Especially,the structures of C₅H₆⁺ and C₅H₅⁺ produced by dissociative photoionization of toluene have been defined as chain structure in this work with theoretical calculations.