SN方法粒子输运计算程序自动建模关键技术问题研究

在充分调研和分析SN方法粒子输运计算程序自动建模方法的基础上，对建模过程中的模型文件格式识别、属性编辑、空腔处理及自动划分离散网格等关键技术问题进行了研究，并提出了合理可行的解决方法。通过对SNAM程序建模部分功能测试，验证了这些方法的正确性和有效性。This paper presents two approaches to enhance the geometry modeling ability of SN particle transport simulation codes and focus on the key issues that lie in the processing from CAD model to SN code geometry model, e.g. CAD file format support, void modeling, mesh generation and model-editing. SNAM （SN Automatic Modeling system） has been developed as an interface code between commercial CAD software and SN particle transport simmulation codes. The testing results have shown that the algorithm and implementation used in SNAM are efficient and capable of all the necessary processing from CAD model to SN geometry model.     

A comparative study of the structure and crystallization of bulk metallic amorphous rod Pr60Ni30Al10 and melt-spun metallic amorphous ribbon Al87Ni10Pr3

Pr-based bulk metallic amorphous （BMA） rods （Pr60Ni30Al10） and Al-based amorphous ribbons （Al87Ni10Pr3） have been prepared by using copper mould casting and single roller melt-spun techniques, respectively. Thermal parameters deduced from differential scanning calorimeter （DSC） indicate that the glass-forming ability （GFA） of Pr60Ni30Al10 BMA rod is far higher than that of Al87Ni10Pr3 ribbon. A comparative study about the differences in structure between the two kinds of glass-forming alloys, superheated viscosity and crystallization are also made. Compared with the amorphous alloy Al87Ni10Pr3, the BMA alloy Pr60Ni30Al10 shows high thermal stability and large viscosity, small diffusivity at the same superheated temperatures. The results of x-Ray diffraction （XRD） and transmission electron microscope （TEM） show the pronounced difference in structure between the two amorphous alloys. Together with crystallization results, the main structure compositions of the amorphous samples are confirmed. It seems that the higher the GFA, the more topological type clusters in the Pr-Ni-Al amorphous alloys, the GFAs of the present glass-forming alloys are closely related to their structures.     

配送量不定的供应链协调

本文研究供应链管理中配送量不确定时，制造商和分销商之间的协调问题。通过建立惩罚和奖励机制模型来协调供应链各部分的运作，使得分散系统就如一个整体。同时分析供应链的利润分配问题，分别得出各个机制下分销商的最优决策。     

Electron spin resonance of diluted solid solutions of MnO2 in Y2O3

Electron spin resonance spectra of Mn²⁺ in diluted solid solutions of MnO₂ in Y₂O₃ have been studied at room temperature for Mn concentrations between 0.20 and 2.00 mol%. Isolated Mn²⁺ ions in sites with two different symmetries were observed, as well as Mn²⁺ ions coupled by the exchange interaction. The relative concentration of isolated to coupled Mn²⁺ ions decreases with increasing manganese concentration. The results are consistent with the assumption that the manganese ions occupy preferentially the C₂ symmetry sites. A theoretical calculation based on this model yields an effective range of the exchange interaction between Mn²⁺ ions of 0.53 nm, of the same order as that of Mn²⁺ ions in CaO.     

CsI(Tl)晶体中反冲Cs和I核Quenching?Factor的测量

许多实验对用CsI(Tl)闪烁晶体作为探测器来寻找和探测暗物质的可行性进行了研究.本工作利用8MeV单能中子轰击CsI(Tl)晶体探测器来研究Cs核和I核的QuenchingFactor.在数据处理中,运用脉冲形状甄别(PSD)方法来分辨反冲核信号和本底信号.实验结果表明,在7keV到132keV的能区中,Quench ingFactor随着反冲核能量的减少而增加.在探测暗物质的实验中,这一性质对于CsI(Tl)晶体探测器获得较低的能量阈值是很有利的.     

A solution of the DGLAP equation for gluon at low x

We obtain a solution of the DGLAP equation for the gluon at low x first by expanding the gluon in a Taylor series and then using the method of characteristics. We test its validity by comparing it with that of Glück, Reya and Vogt. The convergence criteria of the approximation used are also discussed. We also calculate εF ₂(x,Q)²/ε In Q ² using its approximate relations with the gluon distribution at low x. The predictions are then compared with the HERA data.     

行波型热声发动机的分布参数法热力分析

在现有热声网络模型的基础上 ,对行波型热声发动机采用分布参数法进行了详细地分析 ,得到了较为完整的分布参数法网络模型 ,并给出了该模型的定性关系式 ,所得结果与采用集总参数法的结果有很大差异。分析表明 ,分布参数法更适合于一般的系统情况 ,集总参数法仅仅在一定条件下才适用。文中对一个实际系统应用分布参数法进行了分析 ,得到一些结论 ,对于我们设计行波型热声发动机有非常重要的理论指导意义     

Charge transport in a polypeptide chain

Charge transport is one important example of signal transduction in a protein which is responsible for action at a distance, and is a fundamental process in biochemical action. A model is presented in which electronic effects interact with motional processes to combine into a bifunctional model. This model is investigated with new detailed molecular dynamics calculations and successfully explains such action at a distance. Received 1st February 2002 / Received in final form 26 May 2002 Published online 13 September 2002     

静磁场伴随有静电场存在

阐述检测物体是否产生了电场的方法；通过实际检测证实立方体永磁体既产生了负静电场，也产生了正静电场，并测定了具体的场强．     

Nd(Fe,Si)11Cx化合物的全电子计算(x=0,2)

采用基于第一原理的全势能线性缀加平面波加局域轨道((L)APW lo)方法对Nd(Fe,Si)11Cx化合物(x=0,2)的电子结构进行了计算,得到了化合物态密度和磁矩等信息.计算结果表明NdFe9Si2化合物中Si原子主要与4b和32i位Fe原子产生杂化,导致Fe原子磁矩减小.NdFe9Si2C2化合物C原子使32i位Fe原子磁矩进一步降低,同时减弱了Si原子的影响,使得4b位Fe原子磁矩增大.