Complexation behaviour of benzilmono(Iepidyl)hydrazone (BLH) toward bivalent metal ions: A potentiometric study

Potentiometric investigations on metal complexes of various bivalent metal ions, viz. UO₂(II), Cu(II), Ni(II), Co(II), Cd(II), Pb(II), Zn(II) and Mn(II) with benzilmonol(lepidy!)hydrazone (BLH) have been carried out at different ionic strengths and at different temperatures in order to determine stability constants of the complexes. Thermodynamic parameters ΔC, ΔH and ΔS have also been evaluated from temperature coefficient data. The effect of varying the dielectric constant of the medium on the stability constants of complexes has also been investigated at 30±0.5°C and μ = 0.1MNaCl. Thermodynamic stability constants and thermodynamic stabilization energies for the first transition metals have also been discussed.     

Development of B‐doped Si multiple delta‐layer reference materials for SIMS profiling

B‐doped Si multiple delta‐layers (MDL) were developed as certified reference materials (CRM) for secondary ion mass spectrometry (SIMS) depth profiling analysis. Two CRMs with different delta‐layer spacing were grown by ion beam sputter deposition (IBSD). The nominal spacing of the MDL for shallow junction analysis is 10 nm and that for high energy SIMS is 50 nm. The total thickness of the film was certified by high resolution transmission electron microscopy (HR‐TEM). The B‐doped Si MDLs can be used to evaluate SIMS depth resolution and to calibrate the depth scale. A consistency check of the calibration of stylus profilometers for measurement of sputter depth is another possible application. The crater depths measured by a stylus profilometer showed a good linear relationship with the thickness measured from SIMS profiling using the calibrated film thickness for depth scale calibration. The sputtering rate of the amorphous Si thin film grown by sputter deposition was found to be the same as that of the crystalline Si substrate, which means that the sputtering rate measured with these CRMs can be applied to a real analysis of crystalline Si. Copyright © 2005 John Wiley & Sons, Ltd.     

Determination of the Thermal Degradation Kinetic Parameters of Carbon Fibre Reinforced Epoxy Using TG

In this work, a kinetic study on the thermal degradation of carbon fibre reinforced epoxy is presented. The degradation is investigated by means of dynamic thermogravimetric analysis (TG) in air and inert atmosphere at heating rates from 0.5 to 20°C min⁻¹ . Curves obtained by TG in air are quite different from those obtained in nitrogen. A three-step loss is observed during dynamic TG in air while mass loss proceeded as a two step process in nitrogen at fast heating rate. To elucidate this difference, a kinetic analysis is carried on. A kinetic model described by the Kissinger method or by the Ozawa method gives the kinetic parameters of the composite decomposition. Apparent activation energy calculated by Kissinger method in oxidative atmosphere for each step is between 40–50 kJ mol⁻¹ upper than E _a calculated in inert atmosphere. The thermo-oxidative degradation illustrated by Ozawa method shows a stable apparent activation energy (E _a ≈130 kJ mol⁻¹ ) even though the thermal degradation in nitrogen flow presents a maximum E _a for 15% mass loss (E _a ≈60 kJ mol⁻¹ ). This revised version was published online in July 2006 with corrections to the Cover Date.     

Kinetics of proton exchange between semiquinone radicals and hydrochloric acid

The mechanism of proton exchange between semiquinone neutral radicals 3,6-di-tert-butyl-2-hydroxyphenoxyl (1), 6-tert-butyl-3-chloro-2-hydroxy-4-triphenylmethylphenoxyl, and hydrochloric acid in toluene solutions has been studied. The rate of proton exchange with hydrochloric acid is less than that with acetic acid owing to the higher thermodynamic stability of the radical cation formed upon semiquinone radical protonation by hydrochloric acid. The formation of radical cations and their dimers has been proven by spectroscopy.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No 1, pp. 84–87, January, 1993.     

通用模拟退火用于稳健多元分析校正

模拟退火是一种全局优化算法，具有跨越局部最优点的机制，最小一乘是一种较常用的最小二乘更为稳健的优化准则，更适用于可能偏离正态分布的实际数据集，本文探讨了用最小一乘为准则并利用模拟退火方法同时测定多组分体系的可能性。应用于2－3组分药物体系分析，获得了满意的结果，本文还探讨了改变步长提高模拟退火算法优化精度的方法。     

Study of thermal decomposition of ammonium cerium sulphate

Thermal decomposition of ammonium cerium sulphate has been studied by differential scanning calorimetry and thermogravimetry. The results show that the material decomposes in five steps in the temperature region 364–1116 K in oxygen. Based on the thermal data, elemental analysis and magnetic susceptibility measurements, sequence of decomposition has been established. The final product has been identified as CeO₂ by X-ray diffractometry. Ammonium cerium sulphate and the products of the first and the final transitions contain cerium ion in 4+ oxidation state, while the three intermediate phases have cerium ion in 3+ oxidation state. From the non-isothermal DSC studies, kinetic parameters have been computed. The isothermal data show that the dehydration process follows Ginstling-Brounshtein mechanism, while the next three steps are governed by Mampel's unimolecular law of random nucleation.

---

Zusammenfassung Mittels DSC und TG wurde die thermische Zersetzung von Ammoniumzersulfat untersucht. Die Ergebnisse zeigen in Sauerstoff einen fünfstufigen Zersetzungsprozeß im Temperaturbereich 364–1116 K. Ausgehend von den thermoanalytischen Angaben, der Elementaranalyse und den Messungen der magnetischen Suszeptibilität wurde eine Sequenz für die Zersetzung erstellt. Das Endprodukt wurde mittels Röntgendiffraktion als CeO₂ identifiziert. Ammoniumzersulfat und die Produkte des ersten und des letzten Überganges enthalten Zerionen mit der Oxydationsstufe +4, während in den drei Zwischenschritten Zerionen mit der Oxydationsstufe +3 vorkommen. Anhand der nichtisothermen DSC-Untersuchungen wurden die kinetischen Parameter berechnet. Die isothermen Angaben zeigen, daß der Dehydratationsprozeß einem Ginstling-Brounstein Mechanismus folgt, während die folgenden drei Schritte durch das Mampelsche unimolekulare Gesetz der Randomkeimbildung bestimmt werden.

     

Kinetics and thermodynamics of the electrodeposition of palladium, thallium, and tellurium from different baths

Some kinetic and activation thermodynamic functions for the electrodeposition of palladium, thallium, and tellurium from the best selected baths, viz. niclosamide bath [5-chloro-N-(2-chloro-4-nitrophenyl)-2-hydroxybenzamide] for Pd, alizarin red bath for Tl, and salicylaldehyde bath for Te, are determined. Reaction rate constant (k), half-lifetime (t _1/2), activation energy (E _a), and such activation thermodynamic parameters as entropy change (ΔS*), enthalpy change (ΔH*), and Gibbs free energy (ΔG*) are calculated by applying the rate theory of the first-order reaction and the Eyring theory of the reaction rate. The effect of temperature change in the range of 30–60°C on the above parameters is studied and thoroughly discussed. The effect of metal type on both the reaction rate and the activation energy is also investigated. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 3, pp. 264–271. The text was submitted by the authors in English.     

高空核电磁脉冲模拟波形的双指数函数拟合法

 许多标准和公开出版物中都用双指数函数描述高空核电磁脉冲典型波形。通过数值方法，研究了双指数函数一项重要的性质。根据该性质，详细讨论了高空核电磁脉冲模拟波形数值拟合中，双指数函数特征参数与脉冲峰值、前沿、后沿以及半宽等物理参数的关系，从而提出一种简单有效的脉冲参数计算方法。通过IEC标准中规定的高空核电磁脉冲参数的估计与一个实测高空核电磁脉冲模拟波形的数值拟合，验证了该方法的有效性和可靠性。该方法能够适应多种峰值、前沿和半宽的高宽核电磁脉冲模拟波形的数值拟合。     

2D Burgers equation with large Reynolds number using POD/DEIM and calibration

Model order reduction of the two‐dimensional Burgers equation is investigated. The mathematical formulation of POD/discrete empirical interpolation method (DEIM)‐reduced order model (ROM) is derived based on the Galerkin projection and DEIM from the existing high fidelity‐implicit finite‐difference full model. For validation, we numerically compared the POD ROM, POD/DEIM, and the full model in two cases of Re = 100 and Re = 1000, respectively. We found that the POD/DEIM ROM leads to a speed‐up of CPU time by a factor of O(10). The computational stability of POD/DEIM ROM is maintained by means of a careful selection of POD modes and the DEIM interpolation points. The solution of POD/DEIM in the case of Re = 1000 has an accuracy with error O(10^?3) versus O(10^?4) in the case of Re = 100 when compared with the high fidelity model. For this turbulent flow, a closure model consisting of a Tikhonov regularization is carried out in order to recover the missing information and is developed to account for the small‐scale dissipation effect of the truncated POD modes. It is shown that the computational results of this calibrated ROM exhibit considerable agreement with the high fidelity model, which implies the efficiency of the closure model used. Copyright © 2016 John Wiley & Sons, Ltd.     

The oblique chiral nematic phase in calamitic bimesogens

ABSTRACT

The discovery of the oblique chiral (or, the twist-bend, N_TB) nematic phase predicted for bent-core mesogens has engendered much interest due to its unique structure and physical properties, and the possibility of use in the next generation of fast electro-optic technology. Bimesogenic calamitic as well as bent-core mesogens are found to form the N_TB phase. Here, we report direct measurements of the temperature dependence of the conical tilt and the evidence of volcano-like orientational distribution of molecules in the N_TB phase. Optical and x-ray scattering investigations of two single-component calamitic bimesogens and their mixtures show that, while the Maier–Saupe orientational distribution function (ODF) is valid for the higher temperature nematic phase, a generalised expansion in terms of even Legendre functions is needed for the N_TB phase. Temperature dependence of the ODFs and the order parameters 〈P₂(cosβ)〉, 〈P₄(cosβ)〉, and 〈P₆(cosβ)〉 has been measured in both phases. The parameters 〈P₂(cosβ)〉 and 〈P₄(cosβ)〉 increase/decrease in the N/N_TB phase with decreasing temperature, while 〈P₆(cosβ)〉 remains vanishingly small for all samples. The value of 〈P₄(cosβ)〉 becomes negative in the N_TB phase confirming a conical distribution of molecules as they follow a helical trajectory keeping the local director tilted at an angle α wrt the macroscopic director. The heliconical tilt calculated from ODFs, exhibits a power law behaviour with temperature, vanishing at the transition to the N phase.