Gurarii的凸性模与正规结构

本文研究了Gurarii的凸性模与正规结构的联系.利用关于该模的不等式得出了如果存在ε,1≤ε≤2,使得β(ε)＞ε-1.则空间X具有一致正规结构.     

Effect of high gamma dose on the PADC properties

The effect of the properties of PADC nuclear track detectors after exposure to high doses of gamma absorbed doses up to 5×10⁵ Gray (50 Mrad) were studied. The gamma source was a 9.03 PBq (244 KCi), Co-60 source. Results indicate that each of the bulk etch rate (V_b), the tracks etch rate (V_t) and the sensitivity (V) of the detectors increases with the high gamma absorbed dose, but there is a drop in these parameters at the low gamma absorbed dose. Signs of surface roughness were observed by increasing the gamma absorbed doses and changes in color observed for doses larger than 2×10⁵ Gray. The temperature of detectors during irradiation time reached 41°C. The fission fragment tracks (from Cf-252 source) disappeared quickly within the etching time (minutes) for total absorbed doses greater than 3×10⁵ Gray due to their high bulk etch rate.     

Effects of low-LET radiations on CR-39 track detector

The effects of Co-60 gamma-rays and about 25-MeV pulsed electrons have been investigated on CR-39 plastic nuclear track detector. The bulk etch rate was measured as a function of the absorbed dose under three different irradiation conditions; gamma-ray exposure in air at the dose rate of 6 kGy/h, that in vacuum and electron shower in air at 126 kGy/h on average. It was found that the bulk etch rate (V) increased nearly exponentially with the dose (D); V=V₀exp(kD), and the characteristic parameter (k) was 35, 9 and 12 MGy⁻¹, respectively. It is considered that a lack of oxygen in damage formation processes could occur momentarily during a short electron pulse, just similarly to the vacuum effect of reduction in track etch rates in outgassed CR-39 plastic.     

Surface Acoustic Wave Characterization of Equivalent Young's Moduli for Patterned Films北大核心CSCD

Based on the equivalent elasticity theory for layered materials, the micro-mechanics equivalent models for single and dual damascene structures were established. The equivalent elastic constant of the patterned structure was introduced, to establish the propagation model for the surface acoustic waves propagating in the layered structure of the patterned film/ substrate, and the theoretical dispersion curves of the surface acoustic waves were calculated with Green’s function and the matrix method. The finite element method was used to calculate 24 numerical examples of damascene structures with different volume ratios, and the results were compared with those of the strain energy method. The results show that, the average relative errors of the equivalent Young’s moduli of the 300 nm-thick dual damascene film and the 100 nm-thick single damascene film are 2.06% and 2.27%, respectively. The research verifies the correctness of the equivalent patterned structure model and the feasibility of the surface acoustic wave method to characterize the mechanical properties of patterned films, and provides a reference for the development of suitable chemico-mechanical polishing technologies for patterned films under low pressure. © 2023 Editorial Office of Applied Mathematics and Mechanics. All rights reserved.     

CaCu3Ti4O12 陶瓷介电模量响应特性的研究

由于CaCu₃Ti₄O₁₂巨介电常数陶瓷的低频区直流电导较大, 本文采用模量 M"-f频谱表征与分析了低频和高频的两个松弛极化过程. 研究认为, 这两个特征峰属于晶界区Schottky 势垒耗尽层边缘深陷阱的电子松弛过程, 其中高频松弛峰起源于晶粒本征缺陷的电子松弛过程, 而低频松弛峰则为与氧空位有关的松弛极化过程. 对于CaCu₃Ti₄O₁₂这类低频下具有高直流电导的陶瓷材料, 采用模量频谱能更有效地分析研究其损耗极化机理. 关键词： 3Ti₄O₁₂陶瓷')" href="#">CaCu₃Ti₄O₁₂陶瓷 模量 松弛过程 电导     

Effects of annealing and additions on dynamic mechanical properties of SnSb quenched alloy

The elastic modulus, internal friction and stiffness values of quenched SnSb bearing alloy have been evaluated using the dynamic resonance technique. Annealing for 2 and 4 h at 120, 140 and 160 °C caused variations in the elastic modulus, internal friction and stiffness values. This is due to structural changes in the SnSb matrix during isothermal annealing such as coarsening in the phases (Sn, Sb or intermetallic compounds), recrystallization and stress relief. In addition, adding a small amount (1 wt.%) of Cu or Ag improved the bearing mechanical properties of the SnSb bearing alloy. The SnSbCu₁ alloy has the best bearing mechanical properties with thermo-mechanical stability for long time at high temperature.     

高效钙钛矿-有机本体异质结杂化串联太阳能电池

制备了一种有机铅卤钙钛矿-有机本体异质结杂化串联太阳能电池。采用紫外可见吸收光谱、原子力显微镜对薄膜形貌进行了表征。结果表明:有机本体异质结层可以有效改善钙钛矿的表面形貌, 增强了可见光的吸收。优化后的串联结构电池的短路电流可达19.14mA/cm², 开路电压为0.76V, 光电转换效率达到了6.54%。钙钛矿电池和有机本体异质结电池串联结构可以同时提高短路电流及填充因子, 二者具有较好的相容性和协同作用。     

Bulk viscosity of hot dense Quark matter in the PNJL model

Starting from the Kubo formula and the QCD low energy theorem, we study the the bulk viscosity of hot dense quark matter in the PNJL model from the equation of state. We show that the bulk viscosity has a sharp peak near the chiral phase transition, and that the ratio of bulk viscosity over entropy rises dramatically in the vicinity of the phase transition. These results agree with those from the lattice and other model calculations. In addition, we show that the increase of chemical potential raises the bulk viscosity.     

二元Ni-Al合金极端条件下的弹性和热力学性能：全电子准谐波近似 cited: 1)

通过在原子尺度上建模来研究Al、NiAl和Ni₃Al合金在极端高温和高压下的点阵常数、弹性常数、弹性模量、泊松比和弹性各向异性因子等性质．计算得到的弹性常数均满足相应的力学稳定条件．由于NiAl和Ni₃Al具有较高的B=G值,在0～30 GPa内都属于延展性材料．通过包含电子热运动对体系吉布斯自由能贡献的全电子准谐近似方法,得到了高温高压下Al、NiAl和Ni₃Al合金的热膨胀系数、体积模量、热容和熵等．计算值与已有的实验值和理论值符合较好