1-(d-Glucopyranosyl-2′-deoxy-2′-iminomethyl)-2-hydroxynaphthalene as chemo-sensor for Fe in aqueous HEPES buffer based on colour changes observable with the naked eye

A new glucose-based C2-derivatized colorimetric chemo-sensor (L₁) has been synthesized by a one-step condensation of glucosamine and 2-hydroxy-1-naphthaldehyde for the recognition of transition metal ions. Among the eleven metal ions studied, viz., Mg²⁺, Ca²⁺, Mn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺ and Hg²⁺, L₁ results in visual colour change only in the presence of Fe²⁺, Fe³⁺and Cu²⁺ in methanol. However, in an aqueous HEPES buffer (pH 7.2) it is only the Fe³⁺ that gives a distinct visual colour change even in the presence of other metal ions, up to a concentration of 280 ppb. The changes have been explained based on the complex formed, and the composition has been determined to be 2:1 between L₁ and Fe³⁺ based on Job’s plot as well as ESI MS. The structure of the proposed complex has been derived based on HF/6-31G calculations.     

Standard pH values for phosphate buffer reference solutions in acetonitrile-water mixtures up to 50% (m/m)

Reference pH_ps values for 0.025 mol/kg potassium dihydrogen phosphate + 0.025 mol/kg disodium hydrogen phosphate primary standard buffer solutions in 10, 30, 40 and 50% (m/m) acetonitrile-water mixtures at 298.15 K have been determined from reversible e.m.f. measurements of the cell Pt/Ag/AgCl/primary standard buffer + KCl in acetonitrile-water/glass electrode. The consistency of the results is confirmed by multilinear regression analysis of the pH_ps values obtained for each solution composition. Considering the high number of possible acetonitrile-water mixtures, the methodology of linear solvation energy relationships (LSER) was applied and pH_ps data have been correlated with the Kamlet-Taft solvatochromic parameters of the acetonitrile-water mixtures over the whole of the experimental range.     

Hydrolysis of bis(4-nitrophenyl) ethyl phosphate in micellar solutions of dicationic surfactants

The effect of dicationic surfactants on the hydrolysis of bis(4-nitrophenyl) ethyl phosphate in a borate buffer is studied. The presence of long-chain surfactants results in a significant (up to 50-fold) increase in the observed rate constant (k _obs) of the process. The catalytic effect of micelles increases with increasing alkyl chain length due to the strengthening of binding of the reagents by micelles. The presence of two cationic centers in the surfactant molecule enhances the catalytic properties of micelles. The dependence ofk _obs of hydrolysis of the substrate on the borate buffer concentration is studied. Alkaline hydrolysis is more sensitive to the added surfactant than the reaction involving borate ions.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1576–1580, September, 1994.     

Electrokinetic supercharging preconcentration prior to CGE analysis of DNA: Sensitivity depends on buffer viscosity and electrode configuration

Aiming to high sensitivity DNA analysis by CGE, electrokinetic supercharging (EKS) approach was adopted in this article. EKS is known as an online preconcentration technique that combines electrokinetic sample injection (EKI) with transient ITP (tITP). Herein, two factors of buffer viscosity and electrode configuration were studied to further improve EKS performance. An ultralow‐viscosity Tris‐Boric acid‐EDTA (TBE) buffer solution, consisted of 2% low‐molecular‐weight hydroxypropyl methyl cellulose (HPMC) and 6% mannitol and with pH 8.0 adjusted by boric acid, was applied. The boric acid would make a complex with mannitol and generates borate polyanion, which acts as the leading ion for tITP process. The new electrode configuration, a Pt ring around capillary, was modified on Agilent CE system to lead large amount sample introduction during EKS. The standard DNA sample of φX174/HaeIII digest was used to evaluate the qualitative and quantitative abilities of the proposed strategy. The 170 000‐fold highly diluted sample at concentration of 3.0 ng/mL was enriched by EKS and detected by normal UV detection method. The obtained LOD of the weakest peak of 72 bp fragment was around 7.7 pg/mL, apparently improved more than 10 000‐fold in comparison with conventional CGE with UV detection.     

An integrated sample pretreatment platform for quantitative N-glycoproteome analysis with combination of on-line glycopeptide enrichment,deglycosylation and dimethyl labeling

Relative quantification of N-glycoproteomes shows great promise for the discovery of candidate biomarkers and therapeutic targets. The traditional protocol for quantitative analysis of glycoproteomes is usually off-line performed, and suffers from long sample preparation time, and the risk of sample loss or contamination due to manual manipulation. In this study, a novel integrated sample preparation platform for quantitative N-glycoproteome analysis was established, with combination of online N-glycopeptide capture by a HILIC column, sample buffer exchange by a N₂-assisted HILIC–RPLC interface, deglycosylation by a hydrophilic PNGase F immobilized enzymatic reactor (hIMER) and solid dimethyl labeling on a C18 precolumn. To evaluate the performance of such a platform, two equal aliquots of immunoglobulin G (IgG) digests were sequentially pretreated, followed by MALDI-TOF MS analysis. The signal intensity ratio of heavy/light (H/L) labeled deglycosylated peptides with the equal aliquots was 1.00 (RSD = 6.2%, n = 3), much better than those obtained by the offline protocol, with H/L ratio as 0.76 (RSD = 11.6%, n = 3). Additionally, the total on-line sample preparation time was greatly shortened to 160 min, much faster than that of offline approach (24 h). Furthermore, such an integrated pretreatment platform was successfully applied to analyze the two kinds of hepatocarcinoma ascites syngeneic cell lines with high (Hca-F) and low (Hca-P) lymph node metastasis rates. For H/L labeled Hca-P lysates with the equal aliquots, 99.6% of log 2 ratios (H/L) of quantified glycopeptides ranged from −1 to 1, demonstrating high accuracy of the developed sample preparation strategy. By triplicated analysis of glycopeptides and non-glycopeptides of Hca-F and Hca-P lysates, 43 up-regulated and 30 down-regulated (Hca-F/P) N-glycosylation sites, and 11 significantly changed N-glycoproteins were successfully quantified, and most of them were related to tumorigenesis and tumor metastasis. All these results demonstrate the developed integrated N-glycoprotein pretreatment platform is of great power for the accurate, precise and high-throughput analysis of N-glycoproteomes.     

不同金属缓冲层对GaN薄膜的光学及电学性能的影响

本文以金属Ga和NH3为原料,Al、Ni和Fe为金属缓冲层,采用化学气相沉积法(CVD)在Si(100)衬底上合成了GaN微米薄膜。利用X射线衍射仪(XRD)、场发射扫描电子显微镜(FESEM)、能量弥散X射线谱(EDS)、光致发光光谱(PL)和霍尔效应测试仪(HMS-3000)等对GaN微米薄膜进行表征。结果表明,所有样品均为六方纤锌矿结构;样品均出现了很强的近带边紫外发射峰和半峰宽较大的中心波长为672 nm红光发射峰;不同样品的电学性能差异较大。最后对合成的GaN微米薄膜的可能形成机理进行了简单分析。     

毛细管区带电泳法测定卷烟中的生物碱

在磷酸缓冲体系中采用毛细管区带电泳法测定卷烟中的生物碱时,检测灵敏度低,分离度差。考察了卷烟中生物碱的 提取条件,分离缓冲溶液的类型、pH值和浓度,卷烟中生物碱测定方法的线性范围、检出限、重现性和回收率。结果发 现,当采用410 mmol/L的酒石酸溶液（pH 2.8）为缓冲体系时,卷烟中生物碱的检测灵敏度和分离度均有明显改善,烟碱 的线性范围为0.06~0.80 mg/L（其他生物碱为0.006~0.10 mg/L）,检出限为0.002~0.01 mg/L,相对标准偏差为2.2%~10%,回收率为87.6%~102%。     

TFTTP作为阴极缓冲层提高有机薄膜太阳能电池的内建电场和载流子收集效率

采用一种新型的电子传输材料TFTTP作为阴极缓冲层提高基于SubPc/C60异质结的有机薄膜太阳能电池的性能. 通过在有机活性层和金属电极之间加入TFTTP界面层,器件的能量转换效率提高了约30%. 系统研究了器件的二极管特性、光电流特性以及内部的光场分布情况,结果表明,TFTTP阴极缓冲层的引入可以有效地提高器件的内建电场,进而增加电荷转移激子的分离效率. 通过使用TFTTP作为阴极缓冲层,在C60/金属界面形成良好的欧姆接触,降低了界面接触电阻,有利于自由载流子的收集.     

Review on recent and advanced applications of monoliths and related porous polymer gels in micro-fluidic devices

This review critically summarises recent novel and advanced achievements in the application of monolithic materials and related porous polymer gels in micro-fluidic devices appearing within the literature over the period of the last 5 years (2005-2010). The range of monolithic materials has developed rapidly over the past decade, with a diverse and highly versatile class of materials now available, with each exhibiting distinct porosities, pore sizes, and a wide variety of surface functionalities. A major advantage of these materials is their ease of preparation in micro-fluidic channels by in situ polymerisation, leading to monolithic materials being increasingly utilised for a larger variety of purposes in micro-fluidic platforms. Applications of porous polymer monoliths, silica-based monoliths and related homogeneous porous polymer gels in the preparation of separation columns, ion-permeable membranes, preconcentrators, extractors, electrospray emitters, micro-valves, electrokinetic pumps, micro-reactors and micro-mixers in micro-fluidic devices are discussed herein. Procedures used in the preparation of monolithic materials in micro-channels, as well as some practical aspects of the micro-fluidic chip fabrication are addressed. Recent analytical/bioanalytical and catalytic applications of the final micro-fluidic devices incorporating monolithic materials are also reviewed.     

Inverted Organic Solar Cells with Improved Performance using Varied Cathode Bu?er Layers

Organic solar cells with inverted planar heterojunction structure based on subphthalocya-nine and C₆₀ were fabricated using several kinds of materials as cathode buffer layer (CBL), including tris-8-hydroxy-quinolinato aluminum (Al_q3), bathophenanthroline (Bphen), bathocuproine, 2,3,8,9,14,15-hexakis-dodecyl-sulfanyl-5,6,11,12,17,18-hexaazatrinaphthylene (HATNA), and an inorganic compound of Cs₂CO₃. The influence of the lowest unoccupied molecular orbital level and the electron mobility of organic CBL on the solar cells perfor-mance was compared. The results showed that Al_q3, Bphen, and HATNA could significantly improve the device performance. The highest efficiency was obtained from device with an-nealed HATNA as CBL and increased for more than 7 times compared with device without CBL. Furthermore, the simulation results with space charge-limited current theory indicated that the Schottky barrier at the organic/electrode interface in inverted OSC structure was reduced for 27% by inserting HATNA CBL.