The visible and ultraviolet organic light-emitting diodes with germanium dioxide as facile solution-processed anode buffer layer

Germanium dioxide (GeO₂) aqueous solutions are facilely prepared and the corresponding anode buffer layers (ABLs) with solution process are demonstrated. Atomic force microscopy, X-ray photoelectron spectroscopy and ultraviolet photoelectron spectroscopy measurements show that solution-processed GeO₂ behaves superior film morphology and enhanced work function. Using GeO₂ as ABL of organic light-emitting diodes (OLEDs), the visible device with tris(8-hydroxy-quinolinato)aluminium as emitter gives maximum luminous efficiency of 6.5 cd/A and power efficiency of 3.5 lm/W, the ultraviolet device with 3-(4-biphenyl)-4-phenyl-5-tert-butylphenyl-1,2,4-triazole as emitter exhibits short-wavelength emission with peak of 376 nm, full-width at half-maximum of 42 nm, maximum radiance of 3.36 mW/cm² and external quantum efficiency of 1.5%. The performances are almost comparable to the counterparts with poly (3,4-ethylenedioxythiophene):poly (styrenesulfonate) as ABL. The current, impedance, phase and capacitance as a function of voltage characteristics elucidate that the GeO₂ ABL formed from appropriate concentration of GeO₂ aqueous solution favors hole injection enhancement and accordingly promoting device performance.     

Environmental Effect of Macrocyclic Molecules on the Oxidation of Triethylamine by Ferricyanide Ion in Aqueous Solution

The effect of 18-crown-6 and kryptofix (2,2,1) on the oxidation of triethylamine byaqueous ferricyanide ion has been studied at pH 4, 7, and 9.The macrocycle retarded the normal oxidation process at all pH values,the effect depending on the macrocyclic ligand concentration Kryptofix (2,2,1) had a greater effect than 18-crown-6 at all pHvalues in this study. For 18-crown-6, retardation decreases in the order pH 9 > 4 > 7 while forkryptofix it follows the order pH 9 > 7 > 4.     

High resolution X-ray diffraction of GaN grown on Si (1 1 1) by MOVPE

High temperature GaN layers have been grown on Si (1 1 1) substrate by metalorganic vapor phase epitaxy (MOVPE). AlN was used as a buffer layer and studied as a function of thickness and growth temperature. The growth was monitored by in situ laser reflectometry. High resolution X-ray diffraction (HRXRD) revealed that optimized monocrystalline GaN was obtained for a 40 nm AlN grown at 1080 °C. This is in good agreement with the results of morphological study by scanning electron microscopy (SEM) and also confirmed by atomic force microscopy (AFM) observations. The best morphology of AlN with columnar structure and lower rms surface roughness is greatly advantageous to the coalescence of the GaN epilayer. Symmetric and asymmetric GaN reflections were combined for twist and stress measurements in monocrystalline GaN. It was found that mosaicity and biaxial tensile stress are still high in 1.7 μm GaN. Curvature radius measurement was also done and correlated to the cracks observations over the GaN surface.     

Time dependent analysis of finite buffer fluid flows and risk models with a dividend barrier

Based on the matrix-analytic approach to fluid flows initiated by Ramaswami, we develop an efficient time dependent analysis for a general Markov modulated fluid flow model with a finite buffer and an arbitrary initial fluid level at time 0. We also apply this to an insurance risk model with a dividend barrier and a general Markovian arrival process of claims with possible dependencies in successive inter-claim intervals and in claim sizes. We demonstrate the implementability and accuracy of our algorithms through a set of numerical examples that could also serve as test cases for comparing other solution approaches.      

Cyclic networks with general blocking and starvation

We introducegeneral starvation and consider cyclic networks withgeneral blocking and starvation (GBS). The mechanism of general blocking allows the server to process a limited number of jobs when the buffer downstream is full, and that of general starvation allows the server to perform a limited number of services in anticipation of jobs that are yet to arrive. The two main goals of this paper are to investigate how the throughput of cyclic GBS networks is affected by varying (1) the total number of jobsJ, and (2) the buffer allocationk=(k₁..., k_m) subject to a fixed total buffer capacityK=k ₁ +... + k_m. In particular, we obtain sufficient conditions for the throughput to be symmetric inJ and to be maximized whenJ=K/2. We also show that the equal buffer allocation is optimal under the two regimes of light or heavy usage. In order to establish these results, we obtain several intermediate structural properties of the throughput, using duality, reversibility, and concavity, which are of independent interest.Research supported in part by NSF Grant No. ECS-8919818.     

乙酰化淀粉/DL-丙交酯接枝共聚物的合成及降解性能研究

用醋酸乙烯酯和玉米淀粉反应制备出了不同取代度乙酰化淀粉，再用乙酰化淀粉同DL－丙交酯接枝共聚合成乙酰化淀粉／DL－丙交酯接枝共聚物。研究了原料配比，淀粉取代度对接枝反应单体转化率（C％），接枝率（G％）接枝效率（GE％）和接枝支链数均分子量（Mn)的影响，结果表明在给定的试验条件下接枝共聚反应的C％，G％，GE％和Mn可分别达到40％，225％，80％和1．4万。接枝共聚物在磷酸缓冲溶液和户外土壤掩埋降解实验表明，在160天内样品失重率分别为71％和60％，表明合成的乙酰化淀粉／DL－丙交酯接枝共聚物具有很好的降解性能。     

Equations for calculation of the pH of buffer solutions containing sodium or potassium dihydrogen phosphate, sodium hydrogen phosphate, and sodium chloride at 25°C

Published thermodynamic data measured in aqueous mixtures of sodium or potassium dihydrogen phosphate with hydrogen phosphate and chloride at 25°C were used to test recently developed methods for calculation of the pH of phosphate buffer solutions. Equations for ionic activity coefficients are used in these methods. It is shown that all data used in the tests up to an ionic strength of about 0.5 mol-kg^-1 can be accurately predicted by the two methods recommended. In one of these methods, equations of the Hückel type are used for ionic activity coefficients and in the other equations of the Pitzer type. Several sets of phosphate buffer solutions are recommended,e.g., for calibrations of glass electrode cells. In the recommended sets, the pH of the buffer solutions can be calculated either by the Hückel or Pitzer method, and the pH predictions of these methods agree in most cases within 0.005 at least up to ionic strengths of about 0.2 mol-kg^-1. The pH values of the two primary pH standards endorsed by IUPAC based on aqueous mixtures of KH₂PO₄ and Na₂HPO₄,i.e., pH values of 6.865 and 7.413, can also be accurately predicted by the equations recommended in this study.     

Acoustic absorption in aqueous potassium phosphate

Measurements of acoustic absorption and velocity as a function of frequency and concentration in KH₂PO₄–K₂HPO₄ buffers at 4°C and pH 5-7 are reported. The dependence of the observed acoustic relaxation parameters on concentration is consistent with that to be expected from perturbation of a monomer-dimer equilibrium with an equilibrium constant [for 2H₂PO ₄ ^– (H₂PO₄)₂ ^2–] of 0.21 M^–1, a bimolecular rate constant of 5×10⁸ M^–1-sec^–1 and a standard volume change of –5 cm³ mole. The equilibrium constant for H₂PO ₄ ^– + HPO₄ ^2–H₃(PO₄)₂ ^3– is estimated to be 0.7 M^–1.     

Simultaneous determination of trace uranium(VI) and zinc(II) by adsorptive cathodic stripping voltammetry with aluminon ligand

Uranium(VI) complexed with aluminon (3-[bis(3-carboxy-4-hydroxy-phenyl)methylene]-6-oxo-1,4-cyclohexadiene-1-carboxylic acid triammonium salt) was determined by adsorptive cathodic stripping voltammetry (ACSV) using a hanging mercury drop electrode. Trace uranium(VI) and zinc(II) can be simultaneously determined in a single scan in the presence of aluminon and urea. Optimal conditions were found to be: accumulation time; 180–200 s, accumulation potential; 50 mV versus Ag/AgCl, scan rate; 40 mV s⁻¹, supporting electrolyte; 0.1 M sodium acetate buffer at pH 6.5–7.0, and concentration of aluminon; 1×10⁻⁶ M. The linear range of uranium(VI) and zinc(II) were observed over the concentration range 2–33 and 30–120 ng ml⁻¹, respectively. The detection limit (S/N=3) are 0.2 ng ml⁻¹ (uranium) and 30 ng ml⁻¹ (zinc). A good reproducibility shows RSDs of 2.5–4.0% (n=10). The procedure offers high selectivity, with the presence of urea masking some metal ions.     

电渗流与缓冲液浓度之间数学关系的线性表达

It was believed that electroosmotic mobility μeo is inversely proportional to the square root of the ionic strength L But the linear relationship for regression analysis was expressed differently in different papers. The paper studied the linear expression of the mathematical relationship between μeo and c （background buffer concentration） by mathematical transform and real experimental data.μeo values of fused silica capillary were determined in four buffer systems. Their experimental conditions were controlled carefully for decreasing temperature difference AT and pH difference ApH in 50 μm ID capillary, in which no double layer overlap existed. The linear relationship between the reciprocal of electroosmotic mobility and the square root of concentration （or ionic strength） was derived by mathematical method. The regression analysis of experimental data was shown to well correspond to the relationship. The constants in regression equation could be well defined and the calculated results were acceptable.