Synthesis, structural and electrical properties of La and Nb modified Bi4Ti3O12 ferroelectric ceramics

Polycrystalline ceramic samples of Bi_4−xLa_xTi₃O₁₂ (x=0.0, 0.5 and 1) and Bi_3.5La_0.5Ti_3−yNb_yO₁₂ (y=0.02 and 0.04) have been synthesized by standard high temperature solid state reaction method using high purity oxides and carbonates. The effect of lanthanum doping on Bi-site and Nb doping on Ti-site on the structural and electrical properties of Bi₄Ti₃O₁₂ powders was investigated by X-ray diffraction, scanning electron microscopy, dc conductivity and dielectric studies. A better agreement between the observed and calculated X-ray diffraction pattern was obtained by performing the Rietveld refinement with a structural model using the non-centrosymmetric space group Fmmm in all the cases. A better agreement between observed and calculated d-values also shows that the lattice parameters calculated using the Rietveld refinement analysis are better. The increase in lanthanum and niobium contents does not lead to any secondary phases. It is found that La³⁺ doping reduces the material grain size and changes its morphology from the plate-like form to a spherical staking like form. The substitution of Nb for Ti ions affected the degree of disorder and modified the dielectric properties leading to more resistive ceramic compounds. The shape and size of the grains are strongly influenced by the addition of niobium to the system. The activation energies of all the compounds were calculated by measuring their dc electrical conductivities. The frequency and temperature dependent dielectric behavior of all the compounds have also been studied and the results are discussed in detail. The substitution of La and Nb on the Bi and Ti sites decreased the T_c and improved the dielectric and ferroelectric behavior.     

Conical parametric scattering of a single extraordinary beam in BaTiO3 crystal

In this paper, the parametric scattering of a single extraordinary polarized beam of laser in BaTiO₃ photorefractive crystal has been investigated experimentally and theoretically. The resulting pattern consists of beam fanning, isotropic ring, and anisotropic one. Among all parts of scattering pattern, isotropic ring has not been studied as much as beam fanning and anisotropic ring, and there still are some differences in reports about it. Therefore, the study has mainly focused on this part. In this experimental configuration, isotropic ring is just visible in positive angles although the other parts of parametric scattering pattern can be visible from behind and in front of the crystal. In addition to steady state pattern in forward and backward directions, its transient behavior with the rotation of crystal has been studied. The results of experiments have been analyzed carefully, and their theoretical explanations have been presented based on the standard theory of parametric scattering in photorefractive crystals. It has been shown that this configuration corresponds to the so called parametric B-process scattering.     

基于经典光学方法的物体表面微观结构的三维成像

设计了基于经典光学方法的物体表面微观结构的三维成像实验装置以及相应计算程序,从记录不同角度平行光照射下的物体表面照度出发,经图片处理后得到物体表面的三维立体结构.     

莲子蛋白组分二级结构的研究

对莲子蛋白质进行了Osborne蛋白质分类。采用傅里叶变换红外光谱(FTIR)对清蛋白、球蛋白、醇溶蛋白和谷蛋白进行二级结构分析。应用去卷积和曲线拟合方法对四种蛋白组分的酰胺Ⅰ和Ⅲ带进行分析,清蛋白和球蛋白之间以及醇溶蛋白和谷蛋白之间各相应子峰峰位和二级结构峰面积百分比差异较小,但前两者各相应子峰峰位与后两者略有差异;而前两者各相应二级结构峰面积百分比与后两者有较大差异,特别是前两者的各相应有序结构(α-螺旋+β-折叠)峰面积的百分比明显大于后两者。用0.1 mol.L-1NaCl溶液提取的球蛋白和清蛋白有序结构含量均在55%左右,而醇或碱提的醇溶蛋白和谷蛋白的有序结构含量仅为40%左右,盐提的蛋白质二级结构有序性和稳定性更高。     

MSM结构Mg0.2Zn0.8O可见盲光电探测器

采用射频磁控溅射,通过传统的紫外曝光和湿法腐蚀的方法,制备了不同电极间距的金属-半导体-金属(MSM)结构Mg0.2Zn0.8O可见盲光电探测器.研究了器件的暗电流和响应度随电极间距的变化关系,当施加的电压没有达到贯穿电压的时候,暗电流和响应度均随着电极间距的增加而减小,并对其具体的机制进行了研究.     

强流脉冲电子束作用下20钢的微观结构状态

 为了研究金属材料的超快变形行为,利用强流脉冲电子束（HCPEB）装置对20钢进行轰击,采用X射线衍射、光学显微镜及透射电镜等技术分析了受轰击样品的变形组织与结构。实验结果表明,强流脉冲电子束能够在材料表层诱发幅值为1 GPa量级的应力,快速的加热和冷却过程在近表层诱发了强烈的塑性变形,并在材料表层内形成了复杂的位错缠结结构和位错胞结构,同时还伴随位错圈等空位簇缺陷的形成,多次轰击导致局部区域形成纳米和非晶结构。HCPBE轰击诱发的幅值极大的应力和极高的应变速率而导致的整个原子平面的位移可能是非晶结构形成的关键原因。     

基于社团结构的负载传输优化策略研究

研究表明网络社团结构特征对负载传输有影响,明显社团结构特征会降低网络的承载能力.由于最短路由策略在选择路由时有一定的随机性,本文提出了一种基于社团结构的负载传输策略,减少最短路由经过的社团数量,从而降低社团边缘节点的介数.实验结果显示,该策略在保证最短路由小世界特性的同时,提升了网络的承载能力,社团划分得越准确传输优化策略效果越显著. 关键词： 优化路由策略 社团结构 复杂网络 负载传输     

Zn,O共掺杂实现p型AlN的第一性原理研究

基于密度泛函理论(density functional theory),采用第一性原理平面波超软赝势法,研究了纤锌矿AlN,Zn掺杂和Zn,O共掺杂AlN的晶体结构、能带、电子态密度、差分电荷分布及电荷布居数.计算结果表明:Zn,O共掺杂方法中引入激活施主O原子,能使受主能级向低能方向移动,形成了浅受主能级.同时,受主能带变宽、非局域化特征明显、从而提高了Zn原子的掺杂浓度和系统的稳定性.Zn,O共掺杂更有利于获得p型AlN. 关键词： 第一性原理 AlN 电子结构 p型共掺杂     

电化学沉积金属铜的分形枝晶生长控制与性能

 以CuSO_{4/sub>为前驱体,HCl为添加剂,采用电化学沉积方法,在室温条件下制得了μm级、面心立方结构分形铜的枝状晶体,研究了铜离子浓度、硫酸浓度、电流密度、沉积时间、氯离子浓度等实验参数对分形枝状铜晶体尺寸、结构的影响。结果表明：硫酸的浓度对铜沉积物结构无明显影响;随着Cu^{2+/sup>浓度的不断增大,铜沉积物的分形效果越来越明显;增大电流密度（0.4～1.6 A·cm-2/sup>）,铜沉积物由致密向多分枝的开放型转变;延长沉积时间（大于等于5 min）,可获得含大量次级分枝铜的晶体;适当增加盐酸用量（0.05～0.20 mol/L）,铜沉积物枝晶尺寸显著减小。最后讨论了分形枝晶铜在碱性条件下氧化甲醇的电化学性能。}}     

透明陶瓷透光性能的影响因素

 研究了影响激光透明陶瓷透光性能的主要因素,讨论了陶瓷内部气孔和杂质颗粒等散射粒子、晶界结构中晶界折射率与晶粒折射率的差异以及晶界表面粗糙度等因素对陶瓷透光性能的影响,并定量分析了激光陶瓷透过率随气孔尺寸、气孔率、晶粒相对晶界折射率以及晶界表面粗糙度的变化关系。结果表明： 陶瓷的透过率随着气孔率的减小而增大,但透过率随气孔尺寸的增大而呈现出周期性振荡,且当气孔尺寸与入射光波长可比拟时,陶瓷的透过率会明显降低;在晶界结构中,晶界的折射率与晶粒的折射率相差越小,陶瓷的透过率就越高;晶界表面粗糙度越大,透过率越低。然而,晶界折射率不同于晶粒折射率,这使得其陶瓷透过率降低的程度比对晶界表面粗糙度的影响明显得多。在陶瓷制备过程中,需要重点排除尺寸与入射波长可比拟的气孔, 以抑制晶界结构中第二相的产生。